ghcup-hs/docs/guide.md

# User Guide

This is a more in-depth guide specific to GHCup. `ghcup --help` is your friend.

## Basic usage

For the simple, interactive, text-based user interface (TUI) (not available on windows), run:

```sh
ghcup tui
```

For the full functionality via cli:

```sh
# list available ghc/cabal versions
ghcup list

# install the recommended GHC version
ghcup install ghc

# install a specific GHC version
ghcup install ghc 8.2.2

# set the currently "active" GHC version
ghcup set ghc 8.4.4

# install cabal-install
ghcup install cabal

# update ghcup itself
ghcup upgrade
```

### Tags and shortcuts

GHCup has a number of tags and version shortcuts, that can be used as arguments to **install**/**set** etc.
All of the following are valid arguments to `ghcup install ghc`:

* `latest`, `recommended`
* `base-4.15.1.0`
* `9.0.2`, `9.0`, `9`

If the argument is omitted, the default is `recommended`.

## Manpages

For man pages to work you need [man-db](http://man-db.nongnu.org/) as your `man` provider, then issue `man ghc`. Manpages only work for the currently set ghc.
`MANPATH` may be required to be unset.

## Shell-completion

Shell completions are in [scripts/shell-completions](https://gitlab.haskell.org/haskell/ghcup-hs/-/tree/master/scripts/shell-completions) directory of this repository.

For bash: install `shell-completions/bash`
as e.g. `/etc/bash_completion.d/ghcup` (depending on distro)
and make sure your bashrc sources the startup script
(`/usr/share/bash-completion/bash_completion` on some distros).

## Portability

`ghcup` is very portable. There are a few exceptions though:

1. `ghcup tui` is only available on non-windows platforms
2. legacy subcommands `ghcup install` (without a tool identifier) and `ghcup install-cabal` may be removed in the future

# Configuration

A configuration file can be put in `~/.ghcup/config.yaml`. The default config file
explaining all possible configurations can be found in this repo: [config.yaml](https://gitlab.haskell.org/haskell/ghcup-hs/-/blob/master/data/config.yaml).

Partial configuration is fine. Command line options always override the config file settings.

## Env variables

This is the complete list of env variables that change GHCup behavior:

* `GHCUP_USE_XDG_DIRS`: see [XDG support](#xdg-support) above
* `GHCUP_INSTALL_BASE_PREFIX`: the base of ghcup (default: `$HOME`)
* `GHCUP_CURL_OPTS`: additional options that can be passed to curl
* `GHCUP_WGET_OPTS`: additional options that can be passed to wget
* `GHCUP_GPG_OPTS`: additional options that can be passed to gpg
* `GHCUP_SKIP_UPDATE_CHECK`: Skip the (possibly annoying) update check when you run a command
* `CC`/`LD` etc.: full environment is passed to the build system when compiling GHC via GHCup

### XDG support

To enable XDG style directories, set the environment variable `GHCUP_USE_XDG_DIRS` to anything.

Then you can control the locations via XDG environment variables as such:

* `XDG_DATA_HOME`: GHCs will be unpacked in `ghcup/ghc` subdir (default: `~/.local/share`)
* `XDG_CACHE_HOME`: logs and download files will be stored in `ghcup` subdir (default: `~/.cache`)
* `XDG_BIN_HOME`: binaries end up here (default: `~/.local/bin`)
* `XDG_CONFIG_HOME`: the config file is stored in `ghcup` subdir as `config.yaml` (default: `~/.config`)

**Note that `ghcup` makes some assumptions about structure of files in `XDG_BIN_HOME`. So if you have other tools
installing e.g. stack/cabal/ghc into it, this will likely clash. In that case consider disabling XDG support.**

## Caching

GHCup has a few caching mechanisms to avoid redownloads. All cached files end up in `~/.ghcup/cache` by default.

### Downloads cache

Downloaded tarballs (such as GHC, cabal, etc.) are not cached by default unless you pass `ghcup --cache` or set caching
in your [config](#configuration) via `ghcup config set cache true`.

### Metadata cache

The metadata files (also see [github.com/haskell/ghcup-metadata](https://github.com/haskell/ghcup-metadata))
have a 5 minutes cache per default depending on the last access time of the file. That means if you run
`ghcup list` 10 times in a row, only the first time will trigger a download attempt.

### Clearing the cache

If you experience problems, consider clearing the cache via `ghcup gc --cache`.

## Metadata

The metadata are the files that describe tool versions, where to download them etc. and
can be viewed here: [https://github.com/haskell/ghcup-metadata](https://github.com/haskell/ghcup-metadata)

### Mirrors

GHCup allows to use custom mirrors/download-info hosted by yourself or 3rd parties.

To use a mirror, set the following option in `~/.ghcup/config.yaml`:

```yml
url-source:
  # Accepts file/http/https scheme
  OwnSource: "https://some-url/ghcup-0.0.6.yaml"
```

See [config.yaml](https://gitlab.haskell.org/haskell/ghcup-hs/-/blob/master/data/config.yaml)
for more options.

Alternatively you can do it via a cli switch:

```sh
ghcup --url-source=https://some-url/ghcup-0.0.6.yaml list
```

#### Known mirrors

1. [https://mirror.sjtu.edu.cn/docs/ghcup](https://mirror.sjtu.edu.cn/docs/ghcup)

### (Pre-)Release channels

A release channel is basically just a metadata file location. You can add additional release
channels that complement the default one, such as the **prerelease channel** like so:

```sh
ghcup config add-release-channel https://raw.githubusercontent.com/haskell/ghcup-metadata/master/ghcup-prereleases-0.0.7.yaml
```

This will result in `~/.ghcup/config.yaml` to contain this record:

```yml
url-source:
  AddSource:
  - Right: https://raw.githubusercontent.com/haskell/ghcup-metadata/master/ghcup-prereleases-0.0.7.yaml
```

You can add as many channels as you like. They are combined under *Last*, so versions from the prerelease channel
here overwrite the default ones, if any.

To remove the channel, delete the entire `url-source` section or set it back to the default:

```yml
url-source:
  GHCupURL: []
```

If you want to combine your release channel with a mirror, you'd do it like so:

```yml
url-source:
  OwnSource:
  # base metadata
  - "https://mirror.sjtu.edu.cn/ghcup/yaml/ghcup/data/ghcup-0.0.6.yaml"
  # prerelease channel
  - "https://raw.githubusercontent.com/haskell/ghcup-metadata/master/ghcup-prereleases-0.0.7.yaml"
```

# More on installation

## Customisation of the installation scripts

The scripts offered to install GHCup are available here:

* [bootstrap-haskell](https://gitlab.haskell.org/haskell/ghcup-hs/-/blob/master/scripts/bootstrap/bootstrap-haskell#L7)
  for Unix-like operating systems
* [bootstrap-haskell.ps1](https://gitlab.haskell.org/haskell/ghcup-hs/-/blob/master/scripts/bootstrap/bootstrap-haskell.ps1#L17)
  for Windows (PowerShell). This will, in turn, run the final bootstrap script
  (by default, that for the Unix-like operating systems).

The effect of the scripts can be customised by setting one or more
`BOOTSTRAP_HASKELL_*` environment variables (as set out in the first script)
and, in the case of Windows, by specifying parameters (as set out in the
PowerShell script).

For example, you can toggle:

* non-interactive installation
* a more verbose installation
* whether to install only GHCup (and, on Windows, MSYS2)
* not to trigger the upgrade of GHCup
* whether to install the latest version of HLS
* whether to install the latest version of Stack
* whether to respect the XDG Base Directory Specification
* whether to adjust (prepend) the PATH in `bashrc`
* on Windows, whether to adjust MINGW paths in `cabal.config`

You can also specify:

* the GHC version to install
* the Cabal version to install
* which downloader to use (the default is `curl`)
* the base URL for the download of the GHCup binary distribution

On Windows, you can also use the parameters to:

* toggle whether to overwrite a previous installation
* specify the GHCup installation root directory
* specify the Cabal root directory
* specify the directory of an existing installation of MSYS2 (for example,
  the one supplied by Stack)
* specify the URL of the final bootstrap script
* toggle whether to run the final bootstrap script via `bash` (instead of in a
  new MSYS2 shell)

## Installing custom bindists

There are a couple of good use cases to install custom bindists:

1. manually built bindists (e.g. with patches)
    - example: `ghcup install ghc -u 'file:///home/mearwald/tmp/ghc-eff-patches/ghc-8.10.2-x86_64-deb10-linux.tar.xz' 8.10.2-eff`
2. GHC head CI bindists
    - example specifying a branch (`master`): `ghcup install ghc -u 'https://gitlab.haskell.org/ghc/ghc/-/jobs/artifacts/master/raw/ghc-x86_64-linux-fedora33-release.tar.xz?job=x86_64-linux-fedora33-release' head`
    - example specifying a job id (`1129565`): `ghcup install ghc -u ' https://gitlab.haskell.org/api/v4/projects/1/jobs/1129565/artifacts/ghc-x86_64-linux-alpine3_12-validate+fully_static.tar.xz' mr7847`
3. DWARF bindists
    - example: `ghcup install ghc -u 'https://downloads.haskell.org/~ghc/8.10.2/ghc-8.10.2-x86_64-deb10-linux-dwarf.tar.xz' 8.10.2-dwarf`

Since the version parser is pretty lax, `8.10.2-eff` and `head` are both valid versions
and produce the binaries `ghc-8.10.2-eff` and `ghc-head` respectively.
GHCup always needs to know which version the bindist corresponds to (this is not automatically
detected).

## Compiling from source

### GHC

Compiling from source is supported for both source tarballs and arbitrary git refs. See `ghcup compile ghc --help`
for a list of all available options.

If you need to overwrite the existing `build.mk`, check the default files
in [data/build_mk](https://gitlab.haskell.org/haskell/ghcup-hs/-/tree/master/data/build_mk), copy them somewhere, adjust them and
pass `--config path/to/build.mk` to `ghcup compile ghc`.
Common `build.mk` options are explained [here](https://gitlab.haskell.org/ghc/ghc/-/wikis/building/using#build-configuration).

Make sure your system meets all the [prerequisites](https://gitlab.haskell.org/ghc/ghc/-/wikis/building/preparation).

### HLS

There are 3 main ways to compile HLS from source.

1. from hackage (should have up to date version bounds)
    - `ghcup compile hls --version 1.7.0.0 --ghc 9.2.3`
2. from git (allows to build latest sources and PRs)
    - `ghcup compile hls --git-ref master --ghc 9.2.3`
    - `ghcup compile hls --git-ref a32db0b --ghc 9.2.3`
    - `ghcup compile hls --git-ref 1.7.0.0 --ghc 9.2.3`
3. from source distribution that's packaged during release from the corresponding git sources
    - `ghcup compile hls --source-dist 1.7.0.0 --ghc 9.2.3`

All these use `cabal v2-install` under the hood, so all build components are cached.
You can pass arbitrary arguments to cabal, e.g. set the index state like so:

```sh
ghcup compile hls --git-ref master --ghc 9.2.3 -- --index-state=2022-06-12T00:00:00Z --allow-newer
```

You can pass `--ghc <ver>` multiple times to install for many GHCs at once.

When building from git sources, ghcup will auto-detect the HLS version that the git commit corresponds to
from the `haskell-language-server.cabal` file. This version might not have been updated since the last release.
If you want to avoid overwriting the existing installed HLS version, you can instruct ghcup to use `git describe`
to set the HLS version instead:

```sh
ghcup compile hls --git-ref master --ghc 9.2.3 --git-describe-version
```

You can also set the version explicitly:

```sh
ghcup compile hls --git-ref master --ghc 9.2.3 --overwrite-version 1.7.0.0-p1
```

To instruct cabal to run `cabal update` before building, run `ghcup compile hls --version 1.7.0.0 --ghc 9.2.3 --cabal-update`

As always, check `ghcup compile hls --help`.

#### Updating HLS for a new GHC version

First try to build from hackage with some tricks:

```sh
ghcup compile hls --version 1.7.0.0 --ghc 9.2.4 --cabal-update -- --allow-newer --index-state=2022-06-12T00:00:00Z
```

This augments the currently installed 1.7.0.0 official bindists in ghcup with new GHC versions support.

If that fails (since `--allow-newer` is quite brutal), you can install from HLS master branch (which may contain new fixes) like so:
```
ghcup compile hls --git-ref master --git-describe-version --ghc 8.10.7 --ghc 9.2.4 --cabal-update
```

This however will create a new HLS version in ghcup, e.g. `1.7.0.0-105-gdc682ba1`, for both 8.10.7 and 9.2.4. If you want to switch back to the official bindists, run `ghcup set hls 1.7.0.0`.

### Cross support

ghcup can compile and install a cross GHC for any target. However, this
requires that the build host has a complete cross toolchain and various
libraries installed for the target platform.

Consult the GHC documentation on the [prerequisites](https://gitlab.haskell.org/ghc/ghc/-/wikis/building/cross-compiling#tools-to-install).
For distributions with non-standard locations of cross toolchain and
libraries, this may need some tweaking of `build.mk` or configure args.
See `ghcup compile ghc --help` for further information.

## Isolated installs

**Before using isolated installs, make sure to have at least GHCup version 0.1.17.8!**

Ghcup also enables you to install a tool (GHC, Cabal, HLS, Stack) at an isolated location of your choosing.
These installs, as the name suggests, are separate from your main installs and DO NOT conflict with them.


- No symlinks are made to these isolated installed tools, you'd have to manually point to them wherever you intend to use them.

- These installs, can also NOT be deleted from ghcup, you'd have to go and manually delete these.

You need to use the `--isolate` or `-i` flag followed by the directory path.

Examples:

1. install an isolated GHC version at location /home/user/isolated_dir/ghc/
    - `ghcup install ghc 8.10.5 --isolate /home/user/isolated_dir/ghc`

2. isolated install Cabal at a location you desire
    - `ghcup install cabal --isolate /home/username/my_isolated_dir/`

3. do an isolated install with a custom bindist
    - `ghcup install ghc --isolate /home/username/my_isolated_dir/ -u 'https://gitlab.haskell.org/ghc/ghc/-/jobs/artifacts/master/raw/ghc-x86_64-linux-fedora33-release.tar.xz?job=x86_64-linux-fedora33-release' head`

4. isolated install HLS
    - `ghcup install hls --isolate /home/username/dir/hls/`

5. you can even compile ghc to an isolated location.
    - `ghcup compile ghc -j 4 -v 9.0.1 -b 8.10.5 -i /home/username/my/dir/ghc`

## Continuous integration

On Windows, GHCup can be installed automatically on a CI runner
non-interactively, as below. The paramaters to the PowerShell script are
specified positionally, after `-ArgumentList`:

```ps
Set-ExecutionPolicy Bypass -Scope Process -Force;[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072;Invoke-Command -ScriptBlock ([ScriptBlock]::Create((Invoke-WebRequest https://www.haskell.org/ghcup/sh/bootstrap-haskell.ps1 -UseBasicParsing))) -ArgumentList $false,$true,$true,$false,$false,$false,$false,"C:\"
```

On linux/darwin/freebsd, run the following on your runner:

```sh
curl --proto '=https' --tlsv1.2 -sSf https://get-ghcup.haskell.org | BOOTSTRAP_HASKELL_NONINTERACTIVE=1 BOOTSTRAP_HASKELL_MINIMAL=1 sh
```

This will just install `ghcup` and on Windows additionally MSYS2.

See the installation scripts referred to above for the full list of environment
variables and, in the case of Windows, parameters to tweak the script behavior.

### github workflows

On github workflows you can use [https://github.com/haskell/actions/](https://github.com/haskell/actions/).
GHCup itself is also pre-installed on all platforms, but may use non-standard install locations.

## GPG verification

GHCup supports verifying the GPG signature of the metadata file. The metadata file then contains SHA256 hashes of all downloads, so
this is cryptographically secure.

First, obtain the gpg keys:

```sh
gpg --batch --keyserver keys.openpgp.org     --recv-keys 7784930957807690A66EBDBE3786C5262ECB4A3F
gpg --batch --keyserver keyserver.ubuntu.com --recv-keys FE5AB6C91FEA597C3B31180B73EDE9E8CFBAEF01
```

Then verify the gpg key in one of these ways:

1. find out where I live and visit me to do offline key signing
2. figure out my mobile phone number and call me to verify the fingerprint
3. more boring: contact me on Libera IRC (`maerwald`) and verify the fingerprint

Once you've verified the key, you have to figure out if you trust me.

If you trust me, then you can configure gpg in `~/.ghcup/config.yaml`:

```yml
gpg-setting: GPGLax # GPGStrict | GPGLax | GPGNone
```

In `GPGStrict` mode, ghcup will fail if verification fails. In `GPGLax` mode it will just print a warning.
You can also pass the mode via `ghcup --gpg <strict|lax|none>`.

# Tips and tricks

## ghcup run

If you don't want to explicitly switch the active GHC all the time and are using
tools that rely on the plain `ghc` binary, GHCup provides an easy way to execute
commands with a certain toolchain prepended to PATH, e.g.:

```sh
ghcup run --ghc 8.10.7 --cabal latest --hls latest --stack latest --install -- code Setup.hs
```

This will execute vscode with GHC set to 8.10.7 and all other tools to their latest version.

# Troubleshooting

## Script immediately exits on windows

There are two possible reasons:

1. your company blocks the script (some have a whitelist)... ask your administrator
2. your Antivirus or Windows Defender interfere with the installation. Disable them temporarily.

## C compiler cannot create executables

### Darwin

You need to update your XCode command line tools, e.g. [like this](https://stackoverflow.com/questions/34617452/how-to-update-xcode-from-command-line).

## Certificate authority errors (curl)

If your certificates are outdated or improperly configured, curl may be unable
to download ghcup.

There are two known workarounds:

1. Tell curl to ignore certificate errors (dangerous): `curl -k https://gitlab.haskell.org/haskell/ghcup-hs/-/raw/master/scripts/bootstrap/bootstrap-haskell | GHCUP_CURL_OPTS="-k" sh`
2. Try to use wget instead: `wget -O /dev/stdout https://gitlab.haskell.org/haskell/ghcup-hs/-/raw/master/scripts/bootstrap/bootstrap-haskell | BOOTSTRAP_HASKELL_DOWNLOADER=wget sh`

On windows, you can disable curl like so:

```pwsh
Set-ExecutionPolicy Bypass -Scope Process -Force;[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072;Invoke-Command -ScriptBlock ([ScriptBlock]::Create((Invoke-WebRequest https://www.haskell.org/ghcup/sh/bootstrap-haskell.ps1 -UseBasicParsing))) -ArgumentList $true,$false,$false,$false,$false,$false,$false,"","","","",$true
```