ghcup makes it easy to install specific versions of ghc on GNU/Linux, macOS (aka Darwin), FreeBSD and Windows and can also bootstrap a fresh Haskell developer environment from scratch. It follows the unix UNIX philosophy of do one thing and do it well.

Similar in scope to rustup, pyenv and jenv.

Table of Contents

• Installation
  • Simple bootstrap
  • Manual install
  • Vim integration
• Usage
  • Configuration
  • Manpages
  • Shell-completion
  • Cross support
  • XDG support
  • Env variables
  • Installing custom bindists
  • Tips and tricks
  • Stack hooks
  • Sharing MSys2 between stack and ghcup
• Design goals
• How
• Known users
• Known problems
• FAQ

Installation

Simple bootstrap

Follow the instructions at https://www.haskell.org/ghcup/

Manual install

Download the binary for your platform at https://downloads.haskell.org/~ghcup/ and place it into your PATH anywhere.

Then adjust your PATH in ~/.bashrc (or similar, depending on your shell) like so:

export PATH="$HOME/.cabal/bin:$HOME/.ghcup/bin:$PATH"

Vim integration

See ghcup.vim.

Usage

See ghcup --help.

For the simple interactive TUI, run:

ghcup tui

For the full functionality via cli:

# list available ghc/cabal versions
ghcup list

# install the recommended GHC version
ghcup install ghc

# install a specific GHC version
ghcup install ghc 8.2.2

# set the currently "active" GHC version
ghcup set ghc 8.4.4

# install cabal-install
ghcup install cabal

# update ghcup itself
ghcup upgrade

GHCup works very well with cabal-install, which handles your haskell packages and can demand that a specific version of ghc is available, which ghcup can do.

Configuration

A configuration file can be put in ~/.ghcup/config.yaml. The default config file explaining all possible configurations can be found in this repo: config.yaml.

Partial configuration is fine. Command line options always override the config file settings.

Manpages

For man pages to work you need man-db as your man provider, then issue man ghc. Manpages only work for the currently set ghc. MANPATH may be required to be unset.

Shell-completion

Shell completions are in shell-completions.

For bash: install shell-completions/bash as e.g. /etc/bash_completion.d/ghcup (depending on distro) and make sure your bashrc sources the startup script (/usr/share/bash-completion/bash_completion on some distros).

Cross support

ghcup can compile and install a cross GHC for any target. However, this requires that the build host has a complete cross toolchain and various libraries installed for the target platform.

Consult the GHC documentation on the prerequisites. For distributions with non-standard locations of cross toolchain and libraries, this may need some tweaking of build.mk or configure args. See ghcup compile ghc --help for further information.

XDG support

To enable XDG style directories, set the environment variable GHCUP_USE_XDG_DIRS to anything.

Then you can control the locations via XDG environment variables as such:

• XDG_DATA_HOME: GHCs will be unpacked in ghcup/ghc subdir (default: ~/.local/share)
• XDG_CACHE_HOME: logs and download files will be stored in ghcup subdir (default: ~/.cache)
• XDG_BIN_HOME: binaries end up here (default: ~/.local/bin)
• XDG_CONFIG_HOME: the config file is stored in ghcup subdir as config.yaml (default: ~/.config)

Note that ghcup makes some assumptions about structure of files in XDG_BIN_HOME. So if you have other tools installing e.g. stack/cabal/ghc into it, this will likely clash. In that case consider disabling XDG support.

Env variables

This is the complete list of env variables that change GHCup behavior:

• GHCUP_USE_XDG_DIRS: see XDG support above
• TMPDIR: where ghcup does the work (unpacking, building, ...)
• GHCUP_INSTALL_BASE_PREFIX: the base of ghcup (default: $HOME)
• GHCUP_CURL_OPTS: additional options that can be passed to curl
• GHCUP_WGET_OPTS: additional options that can be passed to wget
• GHCUP_SKIP_UPDATE_CHECK: Skip the (possibly annoying) update check when you run a command
• CC/LD etc.: full environment is passed to the build system when compiling GHC via GHCup

On windows, there are additional variables:

• GHCUP_MSYS2: where to find msys2, so we can invoke shells and other cool stuff

Installing custom bindists

There are a couple of good use cases to install custom bindists:

1. manually built bindists (e.g. with patches)

• example: ghcup install ghc -u 'file:///home/mearwald/tmp/ghc-eff-patches/ghc-8.10.2-x86_64-deb10-linux.tar.xz' 8.10.2-eff

2. GHC head CI bindists

• example: ghcup install ghc -u 'https://gitlab.haskell.org/api/v4/projects/1/jobs/artifacts/master/raw/ghc-x86_64-fedora27-linux.tar.xz?job=validate-x86_64-linux-fedora27' head

3. DWARF bindists

• example: ghcup install ghc -u 'https://downloads.haskell.org/~ghc/8.10.2/ghc-8.10.2-x86_64-deb10-linux-dwarf.tar.xz' 8.10.2-dwarf

Since the version parser is pretty lax, 8.10.2-eff and head are both valid versions and produce the binaries ghc-8.10.2-eff and ghc-head respectively. GHCup always needs to know which version the bindist corresponds to (this is not automatically detected).

Tips and tricks

with_ghc wrapper (e.g. for HLS)

Due to some HLS bugs it's necessary that the ghc in PATH is the one defined in cabal.project. With some simple shell functions, we can start our editor with the appropriate path prepended.

For bash, in e.g. ~/.bashrc define:

with_ghc() {
  local np=$(ghcup --offline whereis -d ghc $1 || { ghcup --cache install ghc $1 && ghcup whereis -d ghc $1 ;})
  if [ -e "${np}" ] ; then
    shift
    PATH="$np:$PATH" "$@"
  else
    >&2 echo "Cannot find or install GHC version $1"
    return 1
  fi
}

For fish shell, in e.g. ~/.config/fish/config.fish define:

function with_ghc
  set --local np (ghcup --offline whereis -d ghc $argv[1] ; or begin ghcup --cache install ghc $argv[1] ; and ghcup whereis -d ghc $argv[1] ; end)
  if test -e "$np"
    PATH="$np:$PATH" $argv[2..-1]
  else
    echo "Cannot find or install GHC version $argv[1]" 1>&2
    return 1
  end
end

Then start a new shell and issue:

# replace 'code' with your editor
with_ghc 8.10.5 code path/to/haskell/source

Cabal and HLS will now see 8.10.5 as the primary GHC, without the need to run ghcup set all the time when switching between projects.

Stack hooks

GHCup distributes a patched Stack, which has support for custom installation hooks, see:

• https://github.com/commercialhaskell/stack/pull/5585

Usually, the bootstrap script will already install a hook for you. If not, download it here, place it in ~/.stack/hooks/ghc-install.sh and make sure it's executable.

Hooks aren't run when system-ghc: true is set in stack.yaml. If you want stack to never fall back to its own installation logic if ghcup fails, run the following command:

stack config set install-ghc false --global

Sharing MSys2 between stack and ghcup

You can tell stack to use GHCup's MSys2 installation. Add the following lines to ~/.stack/config.yaml:

skip-msys: true
extra-path:
  - "C:\\ghcup\\msys64\\usr\\bin"
  - "C:\\ghcup\\msys64\\mingw64\\bin"
extra-include-dirs: "C:\\ghcup\\msys64\\mingw64\\include"
extra-lib-dirs: "C:\\ghcup\\msys64\\mingw64\\lib"

Design goals

1. simplicity
2. non-interactive
3. portable (eh)
4. do one thing and do it well (UNIX philosophy)

Non-goals

1. invoking sudo, apt-get or any package manager
2. handling system packages
3. handling cabal projects
4. being a stack alternative

How

Installs a specified GHC version into ~/.ghcup/ghc/<ver>, and places ghc-<ver> symlinks in ~/.ghcup/bin/.

Optionally, an unversioned ghc link can point to a default version of your choice.

This uses precompiled GHC binaries that have been compiled on fedora/debian by upstream GHC.

Alternatively, you can also tell it to compile from source (note that this might fail due to missing requirements).

In addition this script can also install cabal-install.

Known users

• Github action haskell/actions/setup
• vabal

Known problems

Custom ghc version names

When installing ghc bindists with custom version names as outlined in installing custom bindists, then cabal might be unable to find the correct ghc-pkg (also see #73) if you use cabal build --with-compiler=ghc-foo. Instead, point it to the full path, such as: cabal build --with-compiler=$HOME/.ghcup/ghc/<version-name>/bin/ghc or set that GHC version as the current one via: ghcup set ghc <version-name>.

This problem doesn't exist for regularly installed GHC versions.

Limited distributions supported

Currently only GNU/Linux distributions compatible with the upstream GHC binaries are supported.

Precompiled binaries

Since this uses precompiled binaries you may run into several problems.

Missing libtinfo (ncurses)

You may run into problems with ncurses and missing libtinfo, in case your distribution doesn't use the legacy way of building ncurses and has no compatibility symlinks in place.

Ask your distributor on how to solve this or try to compile from source via ghcup compile <version>.

Libnuma required

This was a bug in the build system of some GHC versions that lead to unconditionally enabled libnuma support. To mitigate this you might have to install the libnuma package of your distribution. See here for a discussion.

Compilation

Although this script can compile GHC for you, it's just a very thin wrapper around the build system. It makes no effort in trying to figure out whether you have the correct toolchain and the correct dependencies. Refer to the official docs on how to prepare your environment for building GHC.

Windows support

Windows support is in early stages. Since windows doesn't support symbolic links properly, ghcup uses a shimgen wrapper. It seems to work well, but there may be unknown issues with that approach.

Windows 7 and Powershell 2.0 aren't well supported at the moment, also see:

• https://gitlab.haskell.org/haskell/ghcup-hs/-/issues/140
• https://gitlab.haskell.org/haskell/ghcup-hs/-/issues/197

FAQ

Why reimplement stack?

GHCup is not a reimplementation of stack. The only common part is automatic installation of GHC, but even that differs in scope and design.

Why should I use ghcup over stack?

GHCup is not a replacement for stack. Instead, it supports installing and managing stack versions. It does the same for cabal, GHC and HLS. As such, It doesn't make a workflow choice for you.

Why should I let ghcup manage stack?

You don't need to. However, some users seem to prefer to have a central tool that manages cabal and stack at the same time. Additionally, it can allow better sharing of GHC installation across these tools. Also see:

• https://docs.haskellstack.org/en/stable/yaml_configuration/#system-ghc
• https://github.com/commercialhaskell/stack/pull/5585

Why does ghcup not use stack code?

Oddly, this question has been asked a couple of times. For the curious, here are a few reasons:

1. GHCup started as a shell script. At the time of rewriting it in Haskell, the authors didn't even know that stack exposes some of its installation API
2. Even if they did, it doesn't seem it would have satisfied their needs
   • it didn't support cabal installation, which was the main motivation behind GHCup back then
   • depending on a codebase as big as stack for a central part of one's application without having a short contribution pipeline would likely have caused stagnation or resulted in simply copy-pasting the relevant code in order to adjust it
   • it's not clear how GHCup would have been implemented with the provided API. It seems the codebases are fairly different. GHCup does a lot of symlink handling to expose a central bin/ directory that users can easily put in PATH, without having to worry about anything more. It also provides explicit removal functionality, GHC cross-compilation, a TUI, etc etc.
3. GHCup is built around unix principles and supposed to be simple.

Why not unify...

...stack and Cabal and do away with standalone installers

GHCup is not involved in such decisions. cabal-install and stack might have a sufficiently different user experience to warrant having a choice.

...installer implementations and have a common library

This sounds like an interesting goal. However, GHC installation isn't a hard engineering problem and the shared code wouldn't be too exciting. For such an effort to make sense, all involved parties would need to collaborate and have a short pipeline to get patches in.

It's true this would solve the integration problem, but following unix principles, we can do similar via hooks. Both cabal and stack can support installation hooks. These hooks can then call into ghcup or anything else, also see:

• https://github.com/haskell/cabal/issues/7394
• https://github.com/commercialhaskell/stack/pull/5585

...installers (like, all of it)

So far, there hasn't been an open discussion about this. Is this even a good idea? Sometimes projects converge eventually if their overlap is big enough, sometimes they don't.

While unification sounds like a simplification of the ecosystem, it also takes away choice. Take curl and wget as an example.

How bad do we need this?

Why not support windows?

Windows is supported since GHCup version 0.1.15.1.

Why the haskell reimplementation?

GHCup started as a portable posix shell script of maybe 50 LOC. GHC installation itself can be carried out in about ~3 lines of shell code (download, unpack , configure+make install). However, much convenient functionality has been added since, as well as ensuring that all operations are safe and correct. The shell script ended up with over 2k LOC, which was very hard to maintain.

The main concern when switching from a portable shell script to haskell was platform/architecture support. However, ghcup now re-uses GHCs CI infrastructure and as such is perfectly in sync with all platforms that GHC supports.

Is GHCup affiliated with the Haskell Foundation?

There has been some collaboration: Windows and Stack support were mainly requested by the Haskell Foundation and those seemed interesting features to add.

Other than that, GHCup is dedicated only to its users and is supported by haskell.org through hosting and CI infrastructure.