Ask all questions at the beginning wrt #177

Fixes #118

.gitlab-ci.yml

@@ -41,7 +41,7 @@ variables:
     CABAL_DIR: "$CI_PROJECT_DIR/cabal"
 
 .linux:armv7:
-  image: "arm32v7/fedora"
+  image: "registry.gitlab.haskell.org/ghc/ci-images/armv7-linux-deb10:$DOCKER_REV"
   tags:
     - armv7-linux
   variables:
@@ -50,7 +50,7 @@ variables:
     CABAL_DIR: "$CI_PROJECT_DIR/cabal"
 
 .linux:aarch64:
-  image: "arm64v8/fedora"
+  image: "registry.gitlab.haskell.org/ghc/ci-images/aarch64-linux-deb10:$DOCKER_REV"
   tags:
     - aarch64-linux
   variables:
@@ -124,14 +124,14 @@ variables:
     - .test_ghcup_version
     - .linux:armv7
   before_script:
-    - ./.gitlab/before_script/linux/install_deps_manual.sh
+    - ./.gitlab/before_script/linux/install_deps.sh
 
 .test_ghcup_version:aarch64:
   extends:
     - .test_ghcup_version
     - .linux:aarch64
   before_script:
-    - ./.gitlab/before_script/linux/install_deps_manual.sh
+    - ./.gitlab/before_script/linux/install_deps.sh
 
 .test_ghcup_version:darwin:
   extends:
@@ -374,7 +374,7 @@ release:linux:armv7:
     - .linux:armv7
     - .release_ghcup
   before_script:
-    - ./.gitlab/before_script/linux/install_deps_manual.sh
+    - ./.gitlab/before_script/linux/install_deps.sh
   variables:
     ARTIFACT: "armv7-linux-ghcup"
     GHC_VERSION: "8.10.4"
@@ -387,7 +387,7 @@ release:linux:aarch64:
     - .linux:aarch64
     - .release_ghcup
   before_script:
-    - ./.gitlab/before_script/linux/install_deps_manual.sh
+    - ./.gitlab/before_script/linux/install_deps.sh
   variables:
     ARTIFACT: "aarch64-linux-ghcup"
     GHC_VERSION: "8.10.4"

.gitlab/before_script/linux/install_deps.sh

@@ -7,13 +7,60 @@ set -eux
 mkdir -p "${TMPDIR}"
 
 sudo apt-get update -y
-sudo apt-get install -y libnuma-dev zlib1g-dev libgmp-dev libgmp10 libssl-dev liblzma-dev libbz2-dev git wget
+sudo apt-get install -y libnuma-dev zlib1g-dev libgmp-dev libgmp10 libssl-dev liblzma-dev libbz2-dev git wget lsb-release software-properties-common gnupg2 apt-transport-https
 
-curl -sSfL https://downloads.haskell.org/~ghcup/x86_64-linux-ghcup > ./ghcup-bin
+case "${ARCH}" in
-chmod +x ghcup-bin
+	ARM*)
+		case "${ARCH}" in
+			"ARM")
+				ghc_url=https://downloads.haskell.org/~ghc/${GHC_VERSION}/ghc-${GHC_VERSION}-armv7-deb10-linux.tar.xz
+				cabal_url=home.smart-cactus.org/~ben/cabal-install-${CABAL_VERSION}-armv7-linux-bootstrapped.tar.xz
+				;;
+			"ARM64")
+				ghc_url=https://downloads.haskell.org/~ghc/${GHC_VERSION}/ghc-${GHC_VERSION}-aarch64-deb10-linux.tar.xz
+				cabal_url=https://downloads.haskell.org/~cabal/cabal-install-${CABAL_VERSION}/cabal-install-${CABAL_VERSION}-aarch64-ubuntu-18.04.tar.xz
+				;;
+			*)
+				exit 1 ;;
+		esac
 
-./ghcup-bin upgrade -i -f
+		mkdir -p "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin
-./ghcup-bin install ${GHC_VERSION}
+
-./ghcup-bin set ${GHC_VERSION}
+		curl -O "${ghc_url}"
-./ghcup-bin install-cabal ${CABAL_VERSION}
+		tar -xf ghc-*.tar.*
+		cd ghc-${GHC_VERSION}
+		./configure --prefix="${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/ghc/${GHC_VERSION}
+		make install
+		for i in "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/ghc/${GHC_VERSION}/bin/*-${GHC_VERSION} ; do
+			ln -s "${i}" "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/${i##*/}
+		done
+		for x in "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/*-${GHC_VERSION} ; do
+			ln -s ${x##*/} ${x%-${GHC_VERSION}}
+		done
+		cd ..
+		rm -rf ghc-${GHC_VERSION} ghc-*.tar.*
+		unset x i
+
+		mkdir cabal-install
+		cd cabal-install
+		curl -O "${cabal_url}"
+		tar -xf cabal-install-*
+		mv cabal "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/cabal
+		cd ..
+		rm -rf cabal-install
+
+		;;
+	*) 
+		url=https://downloads.haskell.org/~ghcup/x86_64-linux-ghcup
+
+		curl -sSfL "${url}" > ./ghcup-bin
+		chmod +x ghcup-bin
+
+		./ghcup-bin upgrade -i -f
+		./ghcup-bin install ${GHC_VERSION}
+		./ghcup-bin set ${GHC_VERSION}
+		./ghcup-bin install-cabal ${CABAL_VERSION}
+
+		;;
+esac
 

.gitlab/before_script/linux/install_deps_manual.sh

@@ -1,64 +0,0 @@
-#!/bin/sh
-
-set -eux
-
-. "$( cd "$(dirname "$0")" ; pwd -P )/../../ghcup_env"
-
-mkdir -p "${TMPDIR}"
-
-ednf() {
-	case "${ARCH}" in
-		"ARM")
-			sudo dnf -y --forcearch armv7hl "$@"
-			;;
-		"ARM64")
-			sudo dnf -y --forcearch aarch64 "$@"
-			;;
-		*) exit 1 ;;
-	esac
-}
-
-ednf update
-ednf install gcc gcc-c++ gmp gmp-devel make ncurses ncurses-devel xz xz-devel perl zlib zlib-devel openssl-devel openssl-libs openssl libffi libffi-devel lbzip2 lbzip2-utils bzip2-devel
-if [ "${ARCH}" = "ARM64" ] ; then
-	ednf install numactl numactl-libs numactl-devel
-fi
-ednf install bash wget curl git tar
-ednf install llvm9.0 llvm9.0-devel llvm9.0-libs llvm9.0-static
-
-case "${ARCH}" in
-	"ARM")
-		ghc_url=https://downloads.haskell.org/~ghc/${GHC_VERSION}/ghc-${GHC_VERSION}-armv7-deb10-linux.tar.xz
-		cabal_url=home.smart-cactus.org/~ben/cabal-install-${CABAL_VERSION}-armv7-linux-bootstrapped.tar.xz
-		;;
-	"ARM64")
-		ghc_url=https://downloads.haskell.org/~ghc/${GHC_VERSION}/ghc-${GHC_VERSION}-aarch64-deb10-linux.tar.xz
-		cabal_url=https://downloads.haskell.org/~cabal/cabal-install-${CABAL_VERSION}/cabal-install-${CABAL_VERSION}-aarch64-ubuntu-18.04.tar.xz
-		;;
-	*) exit 1 ;;
-esac
-
-mkdir -p "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin
-
-curl -O "${ghc_url}"
-tar -xf ghc-*.tar.*
-cd ghc-${GHC_VERSION}
-./configure --prefix="${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/ghc/${GHC_VERSION}
-make install
-for i in "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/ghc/${GHC_VERSION}/bin/*-${GHC_VERSION} ; do
-	ln -s "${i}" "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/${i##*/}
-done
-for x in "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/*-${GHC_VERSION} ; do
-	ln -s ${x##*/} ${x%-${GHC_VERSION}}
-done
-cd ..
-rm -rf ghc-${GHC_VERSION} ghc-*.tar.*
-unset x i
-
-mkdir cabal-install
-cd cabal-install
-curl -O "${cabal_url}"
-tar -xf cabal-install-*
-mv cabal "${GHCUP_INSTALL_BASE_PREFIX}"/.ghcup/bin/cabal
-cd ..
-rm -rf cabal-install

.gitlab/ghcup_env

@@ -4,6 +4,6 @@ if [ "${OS}" = "WINDOWS" ] ; then
 	export TMPDIR="$CI_PROJECT_DIR/tmp"
 else
 	export GHCUP_INSTALL_BASE_PREFIX="$CI_PROJECT_DIR"
-	export PATH="$CI_PROJECT_DIR/.ghcup/bin:$CI_PROJECT_DIR/.local/bin:$PATH"
+	export PATH="$CI_PROJECT_DIR/.ghcup/bin:$CI_PROJECT_DIR/.local/bin:/opt/llvm/bin:$PATH"
 	export TMPDIR="$CI_PROJECT_DIR/tmp"
 fi

.gitlab/script/ghcup_version.sh

@@ -84,8 +84,10 @@ ghcup-gen check -f ghcup-${JSON_VERSION}.yaml
 eghcup --numeric-version
 
 eghcup install ${GHC_VERSION}
+[ `$(eghcup whereis ghc ${GHC_VERSION}) --numeric-version` = "${GHC_VERSION}" ]
 eghcup set ${GHC_VERSION}
 eghcup install-cabal ${CABAL_VERSION}
+[ `$(eghcup whereis cabal ${CABAL_VERSION}) --numeric-version` = "${CABAL_VERSION}" ]
 
 cabal --version
 
@@ -125,10 +127,10 @@ else
 
 	if [ "${OS}" = "DARWIN" ] ; then
 		eghcup install hls
-		haskell-language-server-wrapper --version
+		$(eghcup whereis hls) --version
 
 		eghcup install stack
-		stack --version
+		$(eghcup whereis stack) --version
 	elif [ "${OS}" = "LINUX" ] ; then
 		if [ "${ARCH}" = "64" ] ; then
 			eghcup install hls

app/ghcup/Main.hs

@@ -100,6 +100,7 @@ data Command
   | Rm (Either RmCommand RmOptions)
   | DInfo
   | Compile CompileCommand
+  | Whereis WhereisOptions WhereisCommand
   | Upgrade UpgradeOpts Bool
   | ToolRequirements
   | ChangeLog ChangeLogOptions
@@ -190,6 +191,13 @@ data ChangeLogOptions = ChangeLogOptions
   }
 
 
+data WhereisCommand = WhereisTool Tool (Maybe ToolVersion)
+
+data WhereisOptions = WhereisOptions {
+   directory :: Bool
+}
+
+
 -- https://github.com/pcapriotti/optparse-applicative/issues/148
 
 -- | A switch that can be enabled using --foo and disabled using --no-foo.
@@ -335,6 +343,17 @@ com =
            <$> info (compileP <**> helper)
                     (progDesc "Compile a tool from source")
            )
+      <> command
+           "whereis"
+            (info
+             (   (Whereis
+                     <$> (WhereisOptions <$> switch (short 'd' <> long "directory" <> help "return directory of the binary instead of the binary location"))
+                     <*> whereisP
+                 ) <**> helper
+             )
+             (progDesc "Find a tools location"
+             <> footerDoc ( Just $ text whereisFooter ))
+           )
       <> commandGroup "Main commands:"
       )
     <|> subparser
@@ -402,6 +421,23 @@ com =
   By default returns the URI of the ChangeLog of the latest GHC release.
   Pass '-o' to automatically open via xdg-open.|]
 
+  whereisFooter :: String
+  whereisFooter = [s|Discussion:
+  Finds the location of a tool. For GHC, this is the ghc binary, that
+  usually resides in a self-contained "~/.ghcup/ghc/<ghcver>" directory.
+  For cabal/stack/hls this the binary usually at "~/.ghcup/bin/<tool>-<ver>".
+
+Examples:
+  # outputs ~/.ghcup/ghc/8.10.5/bin/ghc.exe
+  ghcup whereis ghc 8.10.5
+  # outputs ~/.ghcup/ghc/8.10.5/bin/
+  ghcup whereis --directory ghc 8.10.5
+  # outputs ~/.ghcup/bin/cabal-3.4.0.0
+  ghcup whereis cabal 3.4.0.0
+  # outputs ~/.ghcup/bin/
+  ghcup whereis --directory cabal 3.4.0.0|]
+
+
 installCabalFooter :: String
 installCabalFooter = [s|Discussion:
   Installs the specified cabal-install version (or a recommended default one)
@@ -706,6 +742,86 @@ Examples:
   ghcup compile ghc -j 4 -v 8.4.2 -b 8.2.2 -x armv7-unknown-linux-gnueabihf --config $(pwd)/build.mk -- --enable-unregisterised|]
 
 
+whereisP :: Parser WhereisCommand
+whereisP = subparser
+  (  command
+      "ghc"
+      (WhereisTool GHC <$> info
+        ( optional (toolVersionArgument Nothing (Just GHC)) <**> helper )
+        ( progDesc "Get GHC location"
+        <> footerDoc (Just $ text whereisGHCFooter ))
+      )
+      <>
+     command
+      "cabal"
+      (WhereisTool Cabal <$> info
+        ( optional (toolVersionArgument Nothing (Just Cabal)) <**> helper )
+        ( progDesc "Get cabal location"
+        <> footerDoc (Just $ text whereisCabalFooter ))
+      )
+      <>
+     command
+      "hls"
+      (WhereisTool HLS <$> info
+        ( optional (toolVersionArgument Nothing (Just HLS)) <**> helper )
+        ( progDesc "Get HLS location"
+        <> footerDoc (Just $ text whereisHLSFooter ))
+      )
+      <>
+     command
+      "stack"
+      (WhereisTool Stack <$> info
+        ( optional (toolVersionArgument Nothing (Just Stack)) <**> helper )
+        ( progDesc "Get stack location"
+        <> footerDoc (Just $ text whereisStackFooter ))
+      )
+      <>
+     command
+      "ghcup"
+      (WhereisTool GHCup <$> info ( (pure Nothing) <**> helper ) ( progDesc "Get ghcup location" ))
+  )
+ where
+  whereisGHCFooter = [s|Discussion:
+  Finds the location of a GHC executable, which usually resides in
+  a self-contained "~/.ghcup/ghc/<ghcver>" directory.
+
+Examples:
+  # outputs ~/.ghcup/ghc/8.10.5/bin/ghc.exe
+  ghcup whereis ghc 8.10.5
+  # outputs ~/.ghcup/ghc/8.10.5/bin/
+  ghcup whereis --directory ghc 8.10.5 |]
+
+  whereisCabalFooter = [s|Discussion:
+  Finds the location of a Cabal executable, which usually resides in
+  "~/.ghcup/bin/".
+
+Examples:
+  # outputs ~/.ghcup/bin/cabal-3.4.0.0
+  ghcup whereis cabal 3.4.0.0
+  # outputs ~/.ghcup/bin
+  ghcup whereis --directory cabal 3.4.0.0|]
+
+  whereisHLSFooter = [s|Discussion:
+  Finds the location of a HLS executable, which usually resides in
+  "~/.ghcup/bin/".
+
+Examples:
+  # outputs ~/.ghcup/bin/haskell-language-server-wrapper-1.2.0
+  ghcup whereis hls 1.2.0
+  # outputs ~/.ghcup/bin/
+  ghcup whereis --directory hls 1.2.0|]
+
+  whereisStackFooter = [s|Discussion:
+  Finds the location of a stack executable, which usually resides in
+  "~/.ghcup/bin/".
+
+Examples:
+  # outputs ~/.ghcup/bin/stack-2.7.1
+  ghcup whereis stack 2.7.1
+  # outputs ~/.ghcup/bin/
+  ghcup whereis --directory stack 2.7.1|]
+
+
 ghcCompileOpts :: Parser GHCCompileOptions
 ghcCompileOpts =
   GHCCompileOptions
@@ -1265,6 +1381,17 @@ Report bugs at <https://gitlab.haskell.org/haskell/ghcup-hs/issues>|]
 #endif
                       ]
 
+          let
+            runWhereIs =
+              runLogger
+                . flip runReaderT appstate
+                . runE
+                  @'[ NotInstalled
+                    , NoToolVersionSet
+                    , NextVerNotFound
+                    , TagNotFound
+                    ]
+
           let runUpgrade =
                 runLogger
                   . flip runReaderT appstate
@@ -1628,6 +1755,22 @@ Make sure to clean up #{tmpdir} afterwards.|])
                         runLogger $ $(logError) $ T.pack $ prettyShow e
                         pure $ ExitFailure 9
 
+            Whereis WhereisOptions{..} (WhereisTool tool whereVer) ->
+              runWhereIs (do
+                (v, _) <- liftE $ fromVersion whereVer tool
+                loc <- liftE $ whereIsTool tool v
+                if directory
+                then pure $ takeDirectory loc
+                else pure loc
+                )
+                >>= \case
+                      VRight r -> do
+                        putStr r
+                        pure ExitSuccess
+                      VLeft e -> do
+                        runLogger $ $(logError) $ T.pack $ prettyShow e
+                        pure $ ExitFailure 30
+
             Upgrade uOpts force -> do
               target <- case uOpts of
                 UpgradeInplace  -> Just <$> liftIO getExecutablePath

bootstrap-haskell

@@ -5,8 +5,12 @@
 #   * BOOTSTRAP_HASKELL_NO_UPGRADE - any nonzero value to not trigger the upgrade
 #   * GHCUP_USE_XDG_DIRS - any nonzero value to respect The XDG Base Directory Specification
 #   * BOOTSTRAP_HASKELL_VERBOSE - any nonzero value for more verbose installation
-#   * BOOTSTRAP_HASKELL_GHC_VERSION
+#   * BOOTSTRAP_HASKELL_GHC_VERSION - the ghc version to install
-#   * BOOTSTRAP_HASKELL_CABAL_VERSION
+#   * BOOTSTRAP_HASKELL_CABAL_VERSION - the cabal version to install
+#   * BOOTSTRAP_HASKELL_INSTALL_STACK - whether to install latest stack
+#   * BOOTSTRAP_HASKELL_INSTALL_HLS - whether to install latest hls
+#   * BOOTSTRAP_HASKELL_ADJUST_BASHRC - whether to adjust PATH in bashrc (prepend)
+#   * BOOTSTRAP_HASKELL_ADJUST_CABAL_CONFIG - whether to adjust mingw paths in cabal.config on windows
 
 # License: LGPL-3.0
 
@@ -19,6 +23,8 @@ arch=$(uname -m)
 ghver="0.1.15.2"
 base_url="https://downloads.haskell.org/~ghcup"
 
+export GHCUP_SKIP_UPDATE_CHECK=yes
+
 case "${plat}" in
         MSYS*|MINGW*)
 			: "${GHCUP_INSTALL_BASE_PREFIX:=/c}"
@@ -60,6 +66,28 @@ warn() {
 	esac
 }
 
+yellow() {
+	case "${plat}" in
+			MSYS*|MINGW*)
+				echo -e "\\033[0;33m$1\\033[0m"
+				;;
+			*)
+				printf "\\033[0;33m%s\\033[0m\\n" "$1"
+				;;
+	esac
+}
+
+green() {
+	case "${plat}" in
+			MSYS*|MINGW*)
+				echo -e "\\033[0;32m$1\\033[0m"
+				;;
+			*)
+				printf "\\033[0;32m%s\\033[0m\\n" "$1"
+				;;
+	esac
+}
+
 edo() {
     "$@" || die "\"$*\" failed!"
 }
@@ -80,40 +108,42 @@ _eghcup() {
 }
 
 _done() {
+	echo
+	echo "==============================================================================="
 	case "${plat}" in
 			MSYS*|MINGW*)
-				echo
+				green
-				echo "All done!"
+				green "All done!"
-				echo
+				green
-				echo "In a new powershell or cmd.exe session, now you can..."
+				green "In a new powershell or cmd.exe session, now you can..."
-				echo
+				green
-				echo "Start a simple repl via:"
+				green "Start a simple repl via:"
-				echo "  ghci"
+				green "  ghci"
-				echo
+				green
-				echo "Start a new haskell project in the current directory via:"
+				green "Start a new haskell project in the current directory via:"
-				echo "  cabal init --interactive"
+				green "  cabal init --interactive"
-				echo
+				green
-				echo "Install other GHC versions and tools via:"
+				green "Install other GHC versions and tools via:"
-				echo "  ghcup list"
+				green "  ghcup list"
-				echo "  ghcup install <tool> <version>"
+				green "  ghcup install <tool> <version>"
-				echo
+				green
-				echo "To install system libraries and update msys2/mingw64,"
+				green "To install system libraries and update msys2/mingw64,"
-				echo "open the \"Mingw haskell shell\""
+				green "open the \"Mingw haskell shell\""
-				echo "and the \"Mingw package management docs\""
+				green "and the \"Mingw package management docs\""
-				echo "desktop shortcuts."
+				green "desktop shortcuts."
 				;;
 			*)
-				echo
+				green
-				echo "All done!"
+				green "All done!"
-				echo
+				green
-				echo "To start a simple repl, run:"
+				green "To start a simple repl, run:"
-				echo "  ghci"
+				green "  ghci"
-				echo
+				green
-				echo "To start a new haskell project in the current directory, run:"
+				green "To start a new haskell project in the current directory, run:"
-				echo "  cabal init --interactive"
+				green "  cabal init --interactive"
-				echo
+				green
-				echo "To install other GHC versions and tools, run:"
+				green "To install other GHC versions and tools, run:"
-				echo "  ghcup tui"
+				green "  ghcup tui"
 				;;
 
 	esac
@@ -201,16 +231,21 @@ download_ghcup() {
 			;;
 	esac
 
-  edo mkdir -p "${GHCUP_DIR}"
+	edo mkdir -p "${GHCUP_DIR}"
+
+	# we may overwrite this in adjust_bashrc
 	cat <<-EOF > "${GHCUP_DIR}"/env || die "Failed to create env file"
 		export PATH="\$HOME/.cabal/bin:${GHCUP_BIN}:\$PATH"
 		EOF
+
 	# shellcheck disable=SC1090
     edo . "${GHCUP_DIR}"/env
     eghcup upgrade
 }
 
-adjust_bashrc() {
+# Figures out the users login shell and sets
+# GHCUP_PROFILE_FILE and MY_SHELL variables.
+find_shell() {
 	case $SHELL in
 		*/zsh) # login shell is zsh
 			GHCUP_PROFILE_FILE="$HOME/.zshrc"
@@ -234,66 +269,259 @@ adjust_bashrc() {
 			MY_SHELL="fish" ;;
 		*) return ;;
 	esac
+}
 
-
+# Ask user if they want to adjust the bashrc.
-	warn ""
+ask_bashrc() {
-	warn "Detected ${MY_SHELL} shell on your system..."
+	if [ -n "${BOOTSTRAP_HASKELL_ADJUST_BASHRC}" ] ; then
-	warn "If you want ghcup to automatically add the required PATH variable to \"${GHCUP_PROFILE_FILE}\""
+		return 1
-	warn ""
+	fi
-	warn "[Y] Yes  [N] No  [?] Help (default is \"Y\")."
-	warn ""
 
 	while true; do
 		if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
-			read -r next_answer </dev/tty
+			echo "-------------------------------------------------------------------------------"
+
+			warn ""
+			warn "Detected ${MY_SHELL} shell on your system..."
+			warn "Do you want ghcup to automatically add the required PATH variable to \"${GHCUP_PROFILE_FILE}\"?"
+			warn ""
+			warn "[P] Yes, prepend  [A] Yes, append  [N] No  [?] Help (default is \"P\")."
+			warn ""
+
+			read -r bashrc_answer </dev/tty
 		else
-			next_answer="yes"
+			return 1
 		fi
-
+		case $bashrc_answer in
-		case $next_answer in
+			[Pp]* | "")
-			[Nn]*)
+				return 1
-				return ;;
-			[Yy]* | "")
-				case $MY_SHELL in
-					"") break ;;
-					fish)
-							mkdir -p "${GHCUP_PROFILE_FILE%/*}"
-							sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
-							echo "set -q GHCUP_INSTALL_BASE_PREFIX[1]; or set GHCUP_INSTALL_BASE_PREFIX \$HOME ; test -f $GHCUP_DIR/env ; and set -gx PATH \$HOME/.cabal/bin $GHCUP_BIN \$PATH # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
-						break ;;
-					bash)
-						sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
-						echo "[ -f \"${GHCUP_DIR}/env\" ] && source \"${GHCUP_DIR}/env\" # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
-						case "${plat}" in
-							"Darwin"|"darwin")
-								if ! grep -q "ghcup-env" "${HOME}/.bash_profile" ; then
-									echo "[[ -f ~/.bashrc ]] && source ~/.bashrc # ghcup-env" >> "${HOME}/.bash_profile"
-								fi
-								;;
-						esac
-						break ;;
-
-					zsh)
-						sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
-						echo "[ -f \"${GHCUP_DIR}/env\" ] && source \"${GHCUP_DIR}/env\" # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
-						break ;;
-				esac
-				warn "OK! ${GHCUP_PROFILE_FILE} has been modified. Restart your terminal for the changes to take effect,"
-				warn "or type \"source ${GHCUP_DIR}/env\" to apply them in your current terminal session."
-				return
 				;;
+			[Aa]*)
+				return 2
+				;;
+			[Nn]*)
+				return 0;;
 			*)
 				echo "Possible choices are:"
 				echo
-				echo "Y - Yes, update my \"${GHCUP_PROFILE_FILE}\" (default)"
+				echo "P - Yes, prepend to PATH, taking precedence (default)"
+				echo "A - Yes, append to PATH"
 				echo "N - No, don't mess with my configuration"
 				echo
 				echo "Please make your choice and press ENTER."
 				;;
 		esac
 	done
+
+	unset bashrc_answer
 }
 
+# Needs 'find_shell' to be called beforehand.
+adjust_bashrc() {
+	case $1 in
+		1)
+			cat <<-EOF > "${GHCUP_DIR}"/env || die "Failed to create env file"
+				export PATH="\$HOME/.cabal/bin:${GHCUP_BIN}:\$PATH"
+				EOF
+			;;
+		2)
+			cat <<-EOF > "${GHCUP_DIR}"/env || die "Failed to create env file"
+				export PATH="\$HOME/.cabal/bin:\$PATH:${GHCUP_BIN}"
+				EOF
+			;;
+		*) ;;
+	esac
+
+	case $1 in
+		1 | 2)
+			case $MY_SHELL in
+				"") break ;;
+				fish)
+					mkdir -p "${GHCUP_PROFILE_FILE%/*}"
+					sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
+					case $1 in
+						1)
+							echo "set -q GHCUP_INSTALL_BASE_PREFIX[1]; or set GHCUP_INSTALL_BASE_PREFIX \$HOME ; set -gx PATH \$HOME/.cabal/bin $GHCUP_BIN \$PATH # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
+							;;
+						2)
+							echo "set -q GHCUP_INSTALL_BASE_PREFIX[1]; or set GHCUP_INSTALL_BASE_PREFIX \$HOME ; set -gx PATH \$HOME/.cabal/bin \$PATH $GHCUP_BIN # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
+							;;
+					esac
+					break ;;
+				bash)
+					sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
+					echo "[ -f \"${GHCUP_DIR}/env\" ] && source \"${GHCUP_DIR}/env\" # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
+					case "${plat}" in
+						"Darwin"|"darwin")
+							if ! grep -q "ghcup-env" "${HOME}/.bash_profile" ; then
+								echo "[[ -f ~/.bashrc ]] && source ~/.bashrc # ghcup-env" >> "${HOME}/.bash_profile"
+							fi
+							;;
+					esac
+					break ;;
+
+				zsh)
+					sed -i -e '/# ghcup-env$/ s/^#*/#/' "${GHCUP_PROFILE_FILE}"
+					echo "[ -f \"${GHCUP_DIR}/env\" ] && source \"${GHCUP_DIR}/env\" # ghcup-env" >> "${GHCUP_PROFILE_FILE}"
+					break ;;
+			esac
+			warn "OK! ${GHCUP_PROFILE_FILE} has been modified. Restart your terminal for the changes to take effect,"
+			warn "or type \"source ${GHCUP_DIR}/env\" to apply them in your current terminal session."
+			return
+			;;
+		*)
+			;;
+	esac
+}
+
+adjust_cabal_config() {
+	edo cabal user-config -a "extra-prog-path: $(cygpath -w "$GHCUP_BIN"), $(cygpath -w "$HOME"/AppData/Roaming/cabal/bin), $(cygpath -w "$GHCUP_MSYS2"/usr/bin), $(cygpath -w "$GHCUP_MSYS2"/mingw64/bin)" -a "extra-include-dirs: $(cygpath -w "$GHCUP_MSYS2"/mingw64/include)" -a "extra-lib-dirs: $(cygpath -w "$GHCUP_MSYS2"/mingw64/lib)" -f init
+}
+
+ask_cabal_config_init() {
+	case "${plat}" in
+			MSYS*|MINGW*)
+				if [ -n "${BOOTSTRAP_HASKELL_ADJUST_CABAL_CONFIG}" ] ; then
+					return 1
+				fi
+
+				if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
+					echo "-------------------------------------------------------------------------------"
+					warn "Create an initial cabal.config including relevant msys2 paths (recommended)?"
+					warn "[Y] Yes  [N] No  [?] Help (default is \"Y\")."
+					echo
+					while true; do
+						read -r mingw_answer </dev/tty
+
+						case $mingw_answer in
+							[Yy]* | "")
+								return 1 ;;
+							[Nn]*)
+								return 0 ;;
+							*)
+								echo "Possible choices are:"
+								echo
+								echo "Y - Yes, create a cabal.config with pre-set paths to msys2/mingw64 (default)"
+								echo "N - No, leave the current/default cabal config untouched"
+								echo
+								echo "Please make your choice and press ENTER."
+								;;
+						esac
+					done
+				else
+					return 1
+				fi
+				;;
+	esac
+
+	unset mingw_answer
+
+    return 0
+}
+
+do_cabal_config_init() {
+	case "${plat}" in
+			MSYS*|MINGW*)
+		case $1 in
+			1)
+				adjust_cabal_config
+				;;
+			0)
+				echo "Make sure that your global cabal.config references the correct mingw64 paths (extra-prog-path, extra-include-dirs and extra-lib-dirs)."
+				echo "And set the environment variable GHCUP_MSYS2 to the root path of your msys2 installation."
+				sleep 5
+				return ;;
+			*) ;;
+		esac
+	esac
+}
+
+ask_hls() {
+	if [ -n "${BOOTSTRAP_HASKELL_INSTALL_HLS}" ] ; then
+		return 1
+	fi
+
+	if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
+		echo "-------------------------------------------------------------------------------"
+
+		warn "Do you want to install haskell-language-server (HLS)?"
+		warn "HLS is a language-server that provides IDE-like functionality"
+		warn "and can integrate with different editors, such as Vim, Emacs, VS Code, Atom, ..."
+		warn "Also see https://github.com/haskell/haskell-language-server/blob/master/README.md"
+		warn ""
+		warn "[Y] Yes  [N] No  [?] Help (default is \"N\")."
+		warn ""
+
+		while true; do
+			read -r hls_answer </dev/tty
+
+			case $hls_answer in
+				[Yy]*)
+					return 1
+					;;
+				[Nn]* | "")
+					return 0
+					;;
+				*)
+					echo "Possible choices are:"
+					echo
+					echo "Y - Yes, install the haskell-langauge-server"
+					echo "N - No, don't install anything more (default)"
+					echo
+					echo "Please make your choice and press ENTER."
+					;;
+			esac
+		done
+	else
+		return 0
+	fi
+
+	unset hls_answer
+}
+
+ask_stack() {
+	if [ -n "${BOOTSTRAP_HASKELL_INSTALL_STACK}" ] ; then
+		return 1
+	fi
+
+	if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
+		echo "-------------------------------------------------------------------------------"
+
+		warn "Do you want to install stack?"
+		warn "Stack is a haskell build tool similar to cabal that is used by some projects."
+		warn "Also see https://docs.haskellstack.org/"
+		warn ""
+		warn "[Y] Yes  [N] No  [?] Help (default is \"N\")."
+		warn ""
+
+		while true; do
+			read -r stack_answer </dev/tty
+
+			case $stack_answer in
+				[Yy]*)
+					return 1 ;;
+				[Nn]* | "")
+					return 0 ;;
+				*)
+					echo "Possible choices are:"
+					echo
+					echo "Y - Yes, install stack"
+					echo "N - No, don't install anything more (default)"
+					echo
+					echo "Please make your choice and press ENTER."
+					;;
+			esac
+		done
+	else
+		return 0
+	fi
+
+	unset stack_answer
+}
+
+
+find_shell
+
 
 echo
 echo "Welcome to Haskell!"
@@ -325,12 +553,20 @@ echo
 if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
     warn "Press ENTER to proceed or ctrl-c to abort."
     warn "Note that this script can be re-run at any given time."
-    echo
     # Wait for user input to continue.
     # shellcheck disable=SC2034
     read -r answer </dev/tty
 fi
 
+ask_bashrc
+ask_bashrc_answer=$?
+ask_cabal_config_init
+ask_cabal_config_init_answer=$?
+ask_hls
+ask_hls_answer=$?
+ask_stack
+ask_stack_answer=$?
+
 edo mkdir -p "${GHCUP_BIN}"
 
 if command -V "ghcup" >/dev/null 2>&1 ; then
@@ -360,118 +596,52 @@ eghcup --cache install ghc "${BOOTSTRAP_HASKELL_GHC_VERSION}"
 eghcup set ghc "${BOOTSTRAP_HASKELL_GHC_VERSION}"
 eghcup --cache install cabal "${BOOTSTRAP_HASKELL_CABAL_VERSION}"
 
-adjust_cabal_config() {
+do_cabal_config_init $ask_cabal_config_init_answer
-	edo cabal user-config -a "extra-prog-path: $(cygpath -w "$GHCUP_BIN"), $(cygpath -w "$HOME"/AppData/Roaming/cabal/bin), $(cygpath -w "$GHCUP_MSYS2"/usr/bin), $(cygpath -w "$GHCUP_MSYS2"/mingw64/bin)" -a "extra-include-dirs: $(cygpath -w "$GHCUP_MSYS2"/mingw64/include)" -a "extra-lib-dirs: $(cygpath -w "$GHCUP_MSYS2"/mingw64/lib)" -f init
-}
-
-case "${plat}" in
-        MSYS*|MINGW*)
-			if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
-				warn "Create an initial cabal.config including relevant msys2 paths (recommended)?"
-				warn "[Y] Yes  [N] No  [?] Help (default is \"Y\")."
-				echo
-				while true; do
-					read -r mingw_answer </dev/tty
-
-					case $mingw_answer in
-						[Yy]* | "")
-							adjust_cabal_config
-							break ;;
-						[Nn]*)
-							echo "Make sure that your global cabal.config references the correct mingw64 paths (extra-prog-path, extra-include-dirs and extra-lib-dirs)."
-							echo "And set the environment variable GHCUP_MSYS2 to the root path of your msys2 installation."
-							sleep 5
-							break ;;
-						*)
-							echo "Possible choices are:"
-							echo
-							echo "Y - Yes, create a cabal.config with pre-set paths to msys2/mingw64 (default)"
-							echo "N - No, leave the current/default cabal config untouched"
-							echo
-							echo "Please make your choice and press ENTER."
-							;;
-					esac
-				done
-			else
-				adjust_cabal_config
-			fi
-			;;
-esac
-
 
 edo cabal new-update
 
+case $ask_hls_answer in
+	1)
+		_eghcup --cache install hls || warn "HLS installation failed, continuing anyway"
+		;;
+	*) ;;
+esac
 
-if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
+case $ask_stack_answer in
-	warn "Do you want to install haskell-language-server (HLS) now?"
+	1)
-	warn "HLS is a language-server that provides IDE-like functionality"
+		_eghcup --cache install stack || warn "Stack installation failed, continuing anyway"
-	warn "and can integrate with different editors, such as Vim, Emacs, VS Code, Atom, ..."
+		;;
-	warn "Also see https://github.com/haskell/haskell-language-server/blob/master/README.md"
+	*) ;;
-	warn ""
+esac
-	warn "[Y] Yes  [N] No  [?] Help (default is \"N\")."
-	warn ""
 
-	while true; do
-		read -r hls_answer </dev/tty
 
-		case $hls_answer in
-			[Yy]*)
-				_eghcup --cache install hls || warn "HLS installation failed, continuing anyway"
-				break ;;
-			[Nn]* | "")
-				break ;;
-			*)
-				echo "Possible choices are:"
-				echo
-				echo "Y - Yes, install the haskell-langauge-server"
-				echo "N - No, don't install anything more (default)"
-				echo
-				echo "Please make your choice and press ENTER."
-				;;
-		esac
-	done
-
-	warn "Do you want to install stack now?"
-	warn "Stack is a haskell build tool similar to cabal that is used by some projects."
-	warn "Also see https://docs.haskellstack.org/"
-	warn ""
-	warn "[Y] Yes  [N] No  [?] Help (default is \"N\")."
-	warn ""
-
-	while true; do
-		read -r stack_answer </dev/tty
-
-		case $stack_answer in
-			[Yy]*)
-				_eghcup --cache install stack || warn "Stack installation failed, continuing anyway"
-				break ;;
-			[Nn]* | "")
-				break ;;
-			*)
-				echo "Possible choices are:"
-				echo
-				echo "Y - Yes, install stack"
-				echo "N - No, don't install anything more (default)"
-				echo
-				echo "Please make your choice and press ENTER."
-				;;
-		esac
-	done
-fi
 
 # short-circuit script based on platform
 case "${plat}" in
         MSYS*|MINGW*)
 			# For windows we always adjust bashrc, since it's inside msys2
-			adjust_bashrc
+			adjust_bashrc $adjust_bashrc_answer
 			;;
 		*)
         	if [ -z "${BOOTSTRAP_HASKELL_NONINTERACTIVE}" ] ; then
-				echo "In order to run ghc and cabal, you need to adjust your PATH variable."
+				case $ask_bashrc_answer in
-				echo "You may want to source '$GHCUP_DIR/env' in your shell"
+					1 | 2)
-				echo "configuration to do so (e.g. ~/.bashrc)."
+						echo
-
+						echo "==============================================================================="
-				adjust_bashrc
+						echo
+						yellow "In order to run ghc and cabal, start a new shell or"
+						yellow "run 'source $GHCUP_DIR/env' in your current shell session."
+						adjust_bashrc $adjust_bashrc_answer
+						;;
+					*)
+						echo
+						echo "==============================================================================="
+						echo
+						yellow "In order to run ghc and cabal, you need to adjust your PATH variable."
+						yellow "You may want to source '$GHCUP_DIR/env' in your shell"
+						yellow "configuration to do so (e.g. ~/.bashrc)."
+						;;
+				esac
 			fi
 			;;
 esac

bootstrap-haskell.ps1

@@ -26,7 +26,13 @@ param (
     # Specify the bootstrap url (default: 'https://www.haskell.org/ghcup/sh/bootstrap-haskell')
     [string]$BootstrapUrl,
     # Run the final bootstrap script via 'bash' instead of a full newly spawned msys2 shell
-    [switch]$InBash
+    [switch]$InBash,
+    # Whether to install stack as well
+    [switch]$InstallStack,
+    # Whether to install hls as well
+    [switch]$InstallHLS,
+    # Skip adjusting cabal.config with mingw paths
+    [switch]$NoAdjustCabalConfig
 )
 
 $Silent = !$Interactive
@@ -150,15 +156,6 @@ function Exec
 
 $ErrorActionPreference = 'Stop'
 
-$elevated = ([Security.Principal.WindowsPrincipal] `
- [Security.Principal.WindowsIdentity]::GetCurrent()
-).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator)
-
-if ($elevated) {
-  Print-Msg -color Yellow -msg ('This script should not be run as administrator/elevated. Waiting 10s before continuing anyway...')
-  Start-Sleep -s 10
-}
-
 $GhcupBasePrefixEnv = [System.Environment]::GetEnvironmentVariable('GHCUP_INSTALL_BASE_PREFIX', 'user')
 
 if ($GhcupBasePrefixEnv) {
@@ -187,6 +184,7 @@ if ($GhcupBasePrefixEnv) {
   }
 }
 
+# ask for base install prefix
 if ($Silent -and !($InstallDir)) {
   $GhcupBasePrefix = $defaultGhcupBasePrefix
 } elseif ($InstallDir) {
@@ -234,6 +232,7 @@ $GhcupMsys2 = [System.Environment]::GetEnvironmentVariable('GHCUP_MSYS2', 'user'
 
 Print-Msg -msg 'Preparing for GHCup installation...'
 
+# ask what to do in case ghcup is already installed
 if (Test-Path -LiteralPath ('{0}' -f $GhcupDir)) {
   Print-Msg -msg ('GHCup already installed at ''{0}''...' -f $GhcupDir)
   if ($Overwrite) {
@@ -263,8 +262,75 @@ if (Test-Path -LiteralPath ('{0}' -f $GhcupDir)) {
 $null = New-Item -Path ('{0}' -f $GhcupDir) -ItemType 'directory' -ErrorAction SilentlyContinue
 $null = New-Item -Path ('{0}' -f $GhcupDir) -Name 'bin' -ItemType 'directory' -ErrorAction SilentlyContinue
 
-Print-Msg -msg 'First checking for Msys2...'
+# ask for cabal dir destination
+if ($CabalDir) {
+  $CabDirEnv = $CabalDir
+  if (!($CabDirEnv)) {
+    Print-Msg -color Red -msg "No directory specified!"
+    Exit 1        
+  } elseif (!(Split-Path -IsAbsolute -Path "$CabDirEnv")) {
+    Print-Msg -color Red -msg "Invalid/Non-absolute Path specified"
+    Exit 1
+  }
+} elseif (!($Silent)) {
+  while ($true) {
 
+    $defaultCabalDir = ('{0}\cabal' -f $GhcupBasePrefix)
+    Print-Msg -color Magenta -msg ('Specify Cabal directory (this is where haskell packages end up). Press enter to accept the default [{0}]:' -f $defaultCabalDir)
+    $CabalDirPrompt = Read-Host
+    $CabDirEnv = ($defaultCabalDir,$CabalDirPrompt)[[bool]$CabalDirPrompt]
+
+    if (!($CabDirEnv)) {
+      Print-Msg -color Red -msg "No directory specified!"         
+    } elseif (!(Split-Path -IsAbsolute -Path "$CabDirEnv")) {
+      Print-Msg -color Red -msg "Invalid/Non-absolute Path specified"
+    } else {
+      Break
+    }
+  }
+} else {
+  $CabDirEnv = ('{0}\cabal' -f $GhcupBasePrefix)
+}
+
+# ask whether to install HLS
+if (!($InstallHLS)) {
+  if (!($Silent)) {
+    $HLSdecision = $Host.UI.PromptForChoice('Install HLS'
+      , 'Do you want to install the haskell-language-server (HLS) for development purposes as well?'
+      , [System.Management.Automation.Host.ChoiceDescription[]] @('&Yes'
+          '&No'
+          '&Abort'), 1)
+
+    if ($HLSdecision -eq 0) {
+      $InstallHLS = $true
+    } elseif ($HLSdecision -eq 2) {
+      Exit 0
+    }
+  }
+}
+
+# ask whether to install stack
+if (!($InstallStack)) {
+  if (!($Silent)) {
+    $StackDecision = $Host.UI.PromptForChoice('Install stack'
+      , 'Do you want to install stack as well?'
+      , [System.Management.Automation.Host.ChoiceDescription[]] @('&Yes'
+          '&No'
+          '&Abort'), 1)
+
+    if ($StackDecision -eq 0) {
+      $InstallStack = $true
+    } elseif ($StackDecision -eq 2) {
+      Exit 0
+    }
+  }
+}
+
+Print-Msg -msg 'Starting installation in 5 seconds, this may take a while...'
+Start-Sleep -s 5
+
+# mingw foo
+Print-Msg -msg 'First checking for Msys2...'
 if (!(Test-Path -Path ('{0}' -f $MsysDir))) {
   if ($Silent) {
     $msys2Decision = 0
@@ -351,34 +417,7 @@ Create-Shortcut -SourceExe 'https://www.msys2.org/docs/package-management' -Argu
 Print-Msg -msg ('Adding {0}\bin to Users Path...' -f $GhcupDir)
 Add-EnvPath -Path ('{0}\bin' -f ([System.IO.Path]::GetFullPath("$GhcupDir"))) -Container 'User'
 
-if ($CabalDir) {
-  $CabDirEnv = $CabalDir
-  if (!($CabDirEnv)) {
-    Print-Msg -color Red -msg "No directory specified!"
-    Exit 1        
-  } elseif (!(Split-Path -IsAbsolute -Path "$CabDirEnv")) {
-    Print-Msg -color Red -msg "Invalid/Non-absolute Path specified"
-    Exit 1
-  }
-} elseif (!($Silent)) {
-  while ($true) {
 
-    $defaultCabalDir = ('{0}\cabal' -f $GhcupBasePrefix)
-    Print-Msg -color Magenta -msg ('Specify Cabal directory (this is where haskell packages end up). Press enter to accept the default [{0}]:' -f $defaultCabalDir)
-    $CabalDirPrompt = Read-Host
-    $CabDirEnv = ($defaultCabalDir,$CabalDirPrompt)[[bool]$CabalDirPrompt]
-
-    if (!($CabDirEnv)) {
-      Print-Msg -color Red -msg "No directory specified!"         
-    } elseif (!(Split-Path -IsAbsolute -Path "$CabDirEnv")) {
-      Print-Msg -color Red -msg "Invalid/Non-absolute Path specified"
-    } else {
-      Break
-    }
-  }
-} else {
-  $CabDirEnv = ('{0}\cabal' -f $GhcupBasePrefix)
-}
 
 $CabalDirFull = [System.IO.Path]::GetFullPath("$CabDirEnv")
 Print-Msg -msg ('Setting CABAL_DIR to ''{0}''' -f $CabalDirFull)
@@ -388,16 +427,25 @@ Print-Msg -msg 'Starting GHCup installer...'
 
 $Msys2Shell = ('{0}\msys2_shell.cmd' -f $MsysDir)
 
-if ($Silent) {
+# The bootstrap script is always silent, since we ask relevant questions here
-  $SilentExport = 'export BOOTSTRAP_HASKELL_NONINTERACTIVE=1 ;'
+$SilentExport = 'export BOOTSTRAP_HASKELL_NONINTERACTIVE=1 ;'
-} else {
+
-  $SilentExport = ''
+if ($InstallStack) {
+  $StackInstallExport = 'export BOOTSTRAP_HASKELL_INSTALL_STACK=1 ;'
+}
+
+if ($InstallHLS) {
+  $HLSInstallExport = 'export BOOTSTRAP_HASKELL_INSTALL_HLS=1 ;'
+}
+
+if (!($NoAdjustCabalConfig)) {
+  $AdjustCabalConfigExport = 'export BOOTSTRAP_HASKELL_ADJUST_CABAL_CONFIG=1 ;'
 }
 
 if ((Get-Process -ID $PID).ProcessName.StartsWith("bootstrap-haskell") -Or $InBash) {
-  Exec "$Bash" '-lc' ('{4} [ -n ''{1}'' ] && export GHCUP_MSYS2=$(cygpath -m ''{1}'') ; [ -n ''{2}'' ] && export GHCUP_INSTALL_BASE_PREFIX=$(cygpath -m ''{2}/'') ; export PATH=$(cygpath -u ''{3}/bin''):$PATH ; export CABAL_DIR=''{5}'' ; [[ ''{0}'' = https* ]]  && curl --proto ''=https'' --tlsv1.2 -sSf {0} | bash || cat $(cygpath -m ''{0}'') | bash' -f $BootstrapUrl, $MsysDir, $GhcupBasePrefix, $GhcupDir, $SilentExport, $CabalDirFull)
+  Exec "$Bash" '-lc' ('{4} {6} {7} {8} [ -n ''{1}'' ] && export GHCUP_MSYS2=$(cygpath -m ''{1}'') ; [ -n ''{2}'' ] && export GHCUP_INSTALL_BASE_PREFIX=$(cygpath -m ''{2}/'') ; export PATH=$(cygpath -u ''{3}/bin''):$PATH ; export CABAL_DIR=''{5}'' ; [[ ''{0}'' = https* ]]  && curl --proto ''=https'' --tlsv1.2 -sSf {0} | bash || cat $(cygpath -m ''{0}'') | bash' -f $BootstrapUrl, $MsysDir, $GhcupBasePrefix, $GhcupDir, $SilentExport, $CabalDirFull, $StackInstallExport, $HLSInstallExport, $AdjustCabalConfigExport)
 } else {
-  Exec "$Msys2Shell" '-mingw64' '-mintty' '-c' ('{4} [ -n ''{1}'' ] && export GHCUP_MSYS2=$(cygpath -m ''{1}'') ; [ -n ''{2}'' ] && export GHCUP_INSTALL_BASE_PREFIX=$(cygpath -m ''{2}/'') ; export PATH=$(cygpath -u ''{3}/bin''):$PATH ; export CABAL_DIR=''{5}'' ; trap ''echo Press any key to exit && read -n 1 && exit'' 2 ; [[ ''{0}'' = https* ]]  && curl --proto ''=https'' --tlsv1.2 -sSf {0} | bash || cat $(cygpath -m ''{0}'') | bash ; echo ''Press any key to exit'' && read -n 1' -f $BootstrapUrl, $MsysDir, $GhcupBasePrefix, $GhcupDir, $SilentExport, $CabalDirFull)
+  Exec "$Msys2Shell" '-mingw64' '-mintty' '-c' ('{4} {6} {7} {8} [ -n ''{1}'' ] && export GHCUP_MSYS2=$(cygpath -m ''{1}'') ; [ -n ''{2}'' ] && export GHCUP_INSTALL_BASE_PREFIX=$(cygpath -m ''{2}/'') ; export PATH=$(cygpath -u ''{3}/bin''):$PATH ; export CABAL_DIR=''{5}'' ; trap ''echo Press any key to exit && read -n 1 && exit'' 2 ; [[ ''{0}'' = https* ]]  && curl --proto ''=https'' --tlsv1.2 -sSf {0} | bash || cat $(cygpath -m ''{0}'') | bash ; echo ''Press any key to exit'' && read -n 1' -f $BootstrapUrl, $MsysDir, $GhcupBasePrefix, $GhcupDir, $SilentExport, $CabalDirFull, $StackInstallExport, $HLSInstallExport, $AdjustCabalConfigExport)
 }
 
 
@@ -429,3 +477,5 @@ if ((Get-Process -ID $PID).ProcessName.StartsWith("bootstrap-haskell") -Or $InBa
 
 
 
+
+

ghcup-0.0.5.yaml

@@ -2060,8 +2060,8 @@ ghcupDownloads:
         A_ARM64:
           Linux_UnknownLinux:
             unknown_versioning:
-              dlUri: https://downloads.haskell.org/~ghcup/0.1.15.2/aarch64-linux-ghcup-0.1.15.2-r2
+              dlUri: https://downloads.haskell.org/~ghcup/0.1.15.2/aarch64-linux-ghcup-0.1.15.2-r1
-              dlHash: d67702f7c9e3586e85ed7c1bd09b7544da55bd1d3b4a961a07018348f78cf76b
+              dlHash: d853372440f3d43babbb868fad399811241760f2233829c92403fcbea8c547ec
           Darwin:
             unknown_versioning:
               dlUri: https://downloads.haskell.org/~ghcup/0.1.15.2/aarch64-apple-darwin-ghcup-0.1.15.2
@@ -2069,8 +2069,8 @@ ghcupDownloads:
         A_ARM:
           Linux_UnknownLinux:
             unknown_versioning:
-              dlUri: https://downloads.haskell.org/~ghcup/0.1.15.2/armv7-linux-ghcup-0.1.15.2
+              dlUri: https://downloads.haskell.org/~ghcup/0.1.15.2/armv7-linux-ghcup-0.1.15.2-r1
-              dlHash: 03a4af5ed895ada1dd21f4cc3f64dc9078a5bf4268313021d004c04bea7f9c2e
+              dlHash: f8add9b39e1f7d0f03904dc69a8683259972a4472432c1ade27d918c39a4a874
   HLS:
     1.1.0:
       viTags: []

lib/GHCup.hs

@@ -1880,3 +1880,49 @@ postGHCInstall ver@GHCTargetVersion {..} = do
     $ getMajorMinorV _tvVersion
   forM_ v' $ \(mj, mi) -> lift (getGHCForMajor mj mi _tvTarget)
     >>= mapM_ (\v -> liftE $ setGHC v SetGHC_XY)
+
+
+-- | Reports the binary location of a given tool:
+--
+--   * for GHC, this reports: @~\/.ghcup\/ghc\/\<ver\>\/bin\/ghc@
+--   * for cabal, this reports @~\/.ghcup\/bin\/cabal-\<ver\>@
+--   * for hls, this reports @~\/.ghcup\/bin\/haskell-language-server-wrapper-\<ver\>@
+--   * for stack, this reports @~\/.ghcup\/bin\/stack-\<ver\>@
+--   * for ghcup, this reports the location of the currently running executable
+whereIsTool :: ( MonadReader AppState m
+               , MonadLogger m
+               , MonadThrow m
+               , MonadFail m
+               , MonadIO m
+               , MonadCatch m
+               , MonadMask m
+               , MonadUnliftIO m
+               )
+            => Tool
+            -> GHCTargetVersion
+            -> Excepts '[NotInstalled] m FilePath
+whereIsTool tool ver@GHCTargetVersion {..} = do
+  AppState { dirs } <- lift ask
+
+  case tool of
+    GHC -> do
+      whenM (lift $ fmap not $ ghcInstalled ver)
+        $ throwE (NotInstalled GHC ver)
+      bdir <- lift $ ghcupGHCDir ver
+      pure (bdir </> "bin" </> "ghc" <> exeExt)
+    Cabal -> do
+      whenM (lift $ fmap not $ cabalInstalled _tvVersion)
+        $ throwE (NotInstalled Cabal (GHCTargetVersion Nothing _tvVersion))
+      pure (binDir dirs </> "cabal-" <> T.unpack (prettyVer _tvVersion) <> exeExt)
+    HLS -> do
+      whenM (lift $ fmap not $ hlsInstalled _tvVersion)
+        $ throwE (NotInstalled HLS (GHCTargetVersion Nothing _tvVersion))
+      pure (binDir dirs </> "haskell-language-server-wrapper-" <> T.unpack (prettyVer _tvVersion) <> exeExt)
+
+    Stack -> do
+      whenM (lift $ fmap not $ stackInstalled _tvVersion)
+        $ throwE (NotInstalled Stack (GHCTargetVersion Nothing _tvVersion))
+      pure (binDir dirs </> "stack-" <> T.unpack (prettyVer _tvVersion) <> exeExt)
+    GHCup -> do
+      currentRunningExecPath <- liftIO getExecutablePath
+      liftIO $ canonicalizePath currentRunningExecPath