saving uncommitted changes in /etc prior to emerge run

This commit is contained in:
hasufell 2015-09-11 00:00:01 +02:00 committed by Hans Wurst
parent bfecd167e5
commit d13c724b62
5 changed files with 415 additions and 0 deletions

View File

@ -0,0 +1,85 @@
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0

56
pulse/._cfg0000_system.pa Normal file
View File

@ -0,0 +1,56 @@
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds

View File

@ -0,0 +1,35 @@
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no

154
pulse/._cfg0001_default.pa Normal file
View File

@ -0,0 +1,154 @@
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input

View File

@ -0,0 +1,85 @@
[Desktop Entry]
Version=1.0
Name=PulseAudio Sound System
Name[as]=PulseAudio
Name[bn_IN]=PulseAudio
Name[ca]=Sistema de so PulseAudio
Name[cs]=Zvukový systém PulseAudio
Name[de]=PulseAudio Sound System
Name[de_CH]=PulseAudio Sound System
Name[el]=Σύστημα ήχου PulseAudio
Name[es]=Sistema de Sonido PulseAudio
Name[fi]=PulseAudio-äänijärjestelmä
Name[fr]=Système de son PulseAudio
Name[gu]=PulseAudio િ
Name[he]=מערכת הקול PulseAudio
Name[hi]=ि ि
Name[hu]=PulseAudio hangrendszer
Name[id]=Sistem Suara PulseAudio
Name[it]=Sistema sonoro PulseAudio
Name[ja]=PulseAudio
Name[kn]=PulseAudio ಿ
Name[ml]=PulseAudio ി
Name[mr]=PulseAudio
Name[nl]=PulseAudio geluidssysteem
Name[or]=PulseAudio ି
Name[pa]= ਿ
Name[pl]=System dźwięku PulseAudio
Name[pt]=Sistema de Som PulseAudio
Name[pt_BR]=Sistema de som PulseAudio
Name[ru]=Звуковая система PulseAudio
Name[sk]=Zvukový systém PulseAudio
Name[sr]=PulseAudio звучни систем
Name[sr@latin]=PulseAudio zvučni sistem
Name[sv]=PulseAudio ljudsystem
Name[ta]= ி ி ிி
Name[te]=PulseAudio ి
Name[tr]=PulseAudio Ses Sistemi
Name[uk]=Звукова система PulseAudio
Name[zh_CN]=PulseAudio
Name[zh_TW]=PulseAudio
Comment=Start the PulseAudio Sound System
Comment[as]=PulseAudio '
Comment[bn_IN]=PulseAudio
Comment[ca]=Inicialitza el sistema de so PulseAudio
Comment[cs]=Spustit zvukový systém PulseAudio
Comment[de]=Das PulseAudio Sound System starten
Comment[de_CH]=Das PulseAudio Sound System starten
Comment[el]=Έναρξη του συστήματος ήχου PulseAudio
Comment[es]=Iniciar el Sistema de Sonido PulseAudio
Comment[fi]=Käynnistä PulseAudio-äänijärjestelmä
Comment[fr]=Démarrer le système de son PulseAudio
Comment[gu]=PulseAudio િ
Comment[he]=התחל את מערכת הקול PulseAudio
Comment[hi]=ि ि
Comment[hu]=A PulseAudio hangrendszer elindítása
Comment[id]=Memulai Sistem Suara PulseAudio
Comment[it]=Avvia il sistema sonoro PulseAudio
Comment[ja]=PulseAudio
Comment[kn]=PulseAudio ಿ ಿಿ
Comment[ml]=PulseAudio ി ി
Comment[mr]=PulseAudio
Comment[nl]=Start het PulseAudio geluidssysteem
Comment[or]=PulseAudio ି
Comment[pa]= ਿ
Comment[pl]=Uruchomienie systemu dźwięku PulseAudio
Comment[pt]=Inciar o Sistema de Som PulseAudio
Comment[pt_BR]=Iniciar o sistema de som PulseAudio
Comment[ru]=Запуск звуковой системы PulseAudio
Comment[sk]=Spustenie zvukového systému PulseAudio
Comment[sr]=Покрени PulseAudio звучни систем
Comment[sr@latin]=Pokreni PulseAudio zvučni sistem
Comment[sv]=Starta ljudsystemet PulseAudio
Comment[ta]= ி ி ிி
Comment[te]=PulseAudio ి ి
Comment[tr]=PulseAudio Ses Sistemini Başlat
Comment[uk]=Запустити звукову систему PulseAudio
Comment[zh_CN]= PulseAudio
Comment[zh_TW]= PulseAudio
Exec=start-pulseaudio-x11
Terminal=false
Type=Application
Categories=
GenericName=
X-GNOME-Autostart-Phase=Initialization
X-KDE-autostart-phase=1