saving uncommitted changes in /etc prior to emerge run

pulse/._cfg0000_daemon.conf

@@ -0,0 +1,85 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0

pulse/._cfg0000_system.pa

@@ -0,0 +1,56 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started in system
+# mode.
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Automatically restore the volume of streams and devices
+load-module module-stream-restore
+load-module module-device-restore
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### Enable positioned event sounds
+load-module module-position-event-sounds

pulse/._cfg0001_client.conf

@@ -0,0 +1,35 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+; default-dbus-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no

pulse/._cfg0001_default.pa

@@ -0,0 +1,154 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
+#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
+#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
+#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=x11-bell
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input

xdg/autostart/._cfg0000_pulseaudio.desktop

@@ -0,0 +1,85 @@
+[Desktop Entry]
+Version=1.0
+Name=PulseAudio Sound System
+Name[as]=PulseAudio শব্দ ব্যৱস্থা
+Name[bn_IN]=PulseAudio শব্দ ব্যবস্থা
+Name[ca]=Sistema de so PulseAudio
+Name[cs]=Zvukový systém PulseAudio
+Name[de]=PulseAudio Sound System
+Name[de_CH]=PulseAudio Sound System
+Name[el]=Σύστημα ήχου PulseAudio
+Name[es]=Sistema de Sonido PulseAudio
+Name[fi]=PulseAudio-äänijärjestelmä
+Name[fr]=Système de son PulseAudio
+Name[gu]=PulseAudio સાઉન્ડ સિસ્ટમ
+Name[he]=מערכת הקול PulseAudio
+Name[hi]=पल्सऑडियो ध्वनि तंत्र
+Name[hu]=PulseAudio hangrendszer
+Name[id]=Sistem Suara PulseAudio
+Name[it]=Sistema sonoro PulseAudio
+Name[ja]=PulseAudio サウンドシステム
+Name[kn]=PulseAudio ಧ್ವನಿ ವ್ಯವಸ್ಥೆ
+Name[ml]=PulseAudio സൌണ്ട് സിസ്റ്റം
+Name[mr]=PulseAudio आवाज प्रणाली
+Name[nl]=PulseAudio geluidssysteem
+Name[or]=PulseAudio ଧ୍ୱନି ତନ୍ତ୍ର
+Name[pa]=ਪਲਸਆਡੀਓ ਸਾਊਂਡ ਸਿਸਟਮ
+Name[pl]=System dźwięku PulseAudio
+Name[pt]=Sistema de Som PulseAudio
+Name[pt_BR]=Sistema de som PulseAudio
+Name[ru]=Звуковая система PulseAudio
+Name[sk]=Zvukový systém PulseAudio
+Name[sr]=PulseAudio звучни систем
+Name[sr@latin]=PulseAudio zvučni sistem
+Name[sv]=PulseAudio ljudsystem
+Name[ta]=பள்ஸ் ஆடியோ ஒலி கணினி
+Name[te]=PulseAudio శబ్దపు సిస్టమ్
+Name[tr]=PulseAudio Ses Sistemi
+Name[uk]=Звукова система PulseAudio
+Name[zh_CN]=PulseAudio 声音系统
+Name[zh_TW]=PulseAudio 音效系統
+Comment=Start the PulseAudio Sound System
+Comment[as]=PulseAudio শব্দ ব্যৱস্থা আৰম্ভ কৰা হ'ব
+Comment[bn_IN]=PulseAudio শব্দ ব্যবস্থা আরম্ভ করা হবে
+Comment[ca]=Inicialitza el sistema de so PulseAudio
+Comment[cs]=Spustit zvukový systém PulseAudio
+Comment[de]=Das PulseAudio Sound System starten
+Comment[de_CH]=Das PulseAudio Sound System starten
+Comment[el]=Έναρξη του συστήματος ήχου PulseAudio
+Comment[es]=Iniciar el Sistema de Sonido PulseAudio
+Comment[fi]=Käynnistä PulseAudio-äänijärjestelmä
+Comment[fr]=Démarrer le système de son PulseAudio
+Comment[gu]=PulseAudio સાઉન્ડ સિસ્ટમને શરૂ કરો
+Comment[he]=התחל את מערכת הקול PulseAudio
+Comment[hi]=पल्सऑडियो ध्वनि तंत्र प्रारंभ करें
+Comment[hu]=A PulseAudio hangrendszer elindítása
+Comment[id]=Memulai Sistem Suara PulseAudio
+Comment[it]=Avvia il sistema sonoro PulseAudio
+Comment[ja]=PulseAudio サウンドシステムを開始
+Comment[kn]=PulseAudio ಧ್ವನಿ ವ್ಯವಸ್ಥೆಯನ್ನು ಆರಂಭಿಸಿ
+Comment[ml]=PulseAudio സൌണ്ട് സിസ്റ്റം ആരംഭിക്കുക
+Comment[mr]=PulseAudio आवाज प्रणाली सुरू करा
+Comment[nl]=Start het PulseAudio geluidssysteem
+Comment[or]=PulseAudio ଧ୍ୱନି ତନ୍ତ୍ରକୁ ଆରମ୍ଭ କରନ୍ତୁ
+Comment[pa]=ਪਲਸਆਡੀਓ ਸਾਊਂਡ ਸਿਸਟਮ ਚਲਾਓ
+Comment[pl]=Uruchomienie systemu dźwięku PulseAudio
+Comment[pt]=Inciar o Sistema de Som PulseAudio
+Comment[pt_BR]=Iniciar o sistema de som PulseAudio
+Comment[ru]=Запуск звуковой системы PulseAudio
+Comment[sk]=Spustenie zvukového systému PulseAudio
+Comment[sr]=Покрени PulseAudio звучни систем
+Comment[sr@latin]=Pokreni PulseAudio zvučni sistem
+Comment[sv]=Starta ljudsystemet PulseAudio
+Comment[ta]=பள்ஸ் ஆடியோ ஒலி கணினியை துவக்கவும
+Comment[te]=PulseAudio శబ్దపు సిస్టమ్‌ను ప్రారంభించుము
+Comment[tr]=PulseAudio Ses Sistemini Başlat
+Comment[uk]=Запустити звукову систему PulseAudio
+Comment[zh_CN]=启动 PulseAudio 声音系统
+Comment[zh_TW]=啟動 PulseAudio 音效系統
+Exec=start-pulseaudio-x11
+Terminal=false
+Type=Application
+Categories=
+GenericName=
+X-GNOME-Autostart-Phase=Initialization
+X-KDE-autostart-phase=1