etc-gentoo/asterisk/manager.conf
Hans Wurst ed9a74dd0e committing changes in /etc after emerge run
Package changes:
+net-misc/asterisk-11.17.1
2015-08-23 15:27:52 +02:00

154 lines
6.4 KiB
Plaintext

;
; AMI - The Asterisk Manager Interface
;
; Third party application call management support and PBX event supervision
;
; Use the "manager show commands" at the CLI to list available manager commands
; and their authorization levels.
;
; "manager show command <command>" will show a help text.
;
; ---------------------------- SECURITY NOTE -------------------------------
; Note that you should not enable the AMI on a public IP address. If needed,
; block this TCP port with iptables (or another FW software) and reach it
; with IPsec, SSH, or SSL vpn tunnel. You can also make the manager
; interface available over http/https if Asterisk's http server is enabled in
; http.conf and if both "enabled" and "webenabled" are set to yes in
; this file. Both default to no. httptimeout provides the maximum
; timeout in seconds before a web based session is discarded. The
; default is 60 seconds.
;
[general]
enabled = no
;webenabled = yes
port = 5038
bindaddr = 0.0.0.0
; Parameters that control AMI over TLS. ("enabled" must be set too).
; You can open a connection to this socket with e.g.
;
; openssl s_client -connect my_host:5039
;
;tlsenable=no ; set to YES to enable it
;tlsbindaddr=0.0.0.0:5039 ; address and port to bind to, default to bindaddr and port 5039
;tlscertfile=/tmp/asterisk.pem ; path to the certificate.
;tlsprivatekey=/tmp/private.pem ; path to the private key, if no private given,
; if no tlsprivatekey is given, default is to search
; tlscertfile for private key.
;tlscipher=<cipher string> ; string specifying which SSL ciphers to use or not use
;
;allowmultiplelogin = yes ; IF set to no, rejects manager logins that are already in use.
; ; The default is yes.
;
;displayconnects = yes
;
; Add a Unix epoch timestamp to events (not action responses)
;
;timestampevents = yes
;brokeneventsaction = yes ; Restore previous behavior that caused the events
; action to not return a response in certain
; circumstances. Defaults to 'no'.
;
; Display certain channel variables every time a channel-oriented
; event is emitted:
;
;channelvars = var1,var2,var3
; debug = on ; enable some debugging info in AMI messages (default off).
; Also accessible through the "manager debug" CLI command.
; authtimeout specifies the maximum number of seconds a client has to
; authenticate. If the client does not authenticate beofre this timeout
; expires, the client will be disconnected. (default: 30 seconds)
;authtimeout = 30
; authlimit specifies the maximum number of unauthenticated sessions that will
; be allowed to connect at any given time.
;authlimit = 50
;httptimeout = 60
; a) httptimeout sets the Max-Age of the http cookie
; b) httptimeout is the amount of time the webserver waits
; on a action=waitevent request (actually its httptimeout-10)
; c) httptimeout is also the amount of time the webserver keeps
; a http session alive after completing a successful action
;[mark]
;secret = mysecret
;deny=0.0.0.0/0.0.0.0
;permit=209.16.236.73/255.255.255.0
;acl=named_acl_example ; use a named ACL from acl.conf
;
;
;setvar=PBXACCOUNT=edvina
; The setvar option defines channel variables that will be set when this account
; originates a call. You can define multiple setvar= commands for one manager
; user.
;
;eventfilter=Event: Newchannel
;eventfilter=!Channel: DAHDI.*
; The eventfilter option is used to whitelist or blacklist events per user.
; A filter consists of a (basic/old-style and unanchored) regular expression
; that is run on the entire event data. If the first character of the filter
; is an exclamation mark (!), the filter is appended to the blacklist instead
; of the whitelist. After first checking the read access below, the regular
; expression filters are processed as follows:
; - If no filters are configured all events are reported as normal.
; - If there are white filters only: implied black all filter processed first,
; then white filters.
; - If there are black filters only: implied white all filter processed first,
; then black filters.
; - If there are both white and black filters: implied black all filter processed
; first, then white filters, and lastly black filters.
;
; If the device connected via this user accepts input slowly,
; the timeout for writes to it can be increased to keep it
; from being disconnected (value is in milliseconds)
;
; writetimeout = 100
;
;displayconnects = yes ; Display on CLI user login/logoff
;
; Authorization for various classes
;
; Read authorization permits you to receive asynchronous events, in general.
; Write authorization permits you to send commands and get back responses. The
; following classes exist:
;
; all - All event classes below (including any we may have missed).
; system - General information about the system and ability to run system
; management commands, such as Shutdown, Restart, and Reload.
; call - Information about channels and ability to set information in a
; running channel.
; log - Logging information. Read-only. (Defined but not yet used.)
; verbose - Verbose information. Read-only. (Defined but not yet used.)
; agent - Information about queues and agents and ability to add queue
; members to a queue.
; user - Permission to send and receive UserEvent.
; config - Ability to read and write configuration files.
; command - Permission to run CLI commands. Write-only.
; dtmf - Receive DTMF events. Read-only.
; reporting - Ability to get information about the system.
; cdr - Output of cdr_manager, if loaded. Read-only.
; dialplan - Receive NewExten and VarSet events. Read-only.
; originate - Permission to originate new calls. Write-only.
; agi - Output AGI commands executed. Input AGI command to execute.
; cc - Call Completion events. Read-only.
; aoc - Permission to send Advice Of Charge messages and receive Advice
; - Of Charge events.
; test - Ability to read TestEvent notifications sent to the Asterisk Test
; Suite. Note that this is only enabled when the TEST_FRAMEWORK
; compiler flag is defined.
; message - Permissions to send out of call messages. Write-only
;
;read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan
;write = system,call,agent,user,config,command,reporting,originate,message