From fab87cf94da50aeb8ac5b65dd4fc503639d42fa6 Mon Sep 17 00:00:00 2001 From: hasufell Date: Fri, 8 May 2015 12:34:35 +0200 Subject: [PATCH] saving uncommitted changes in /etc prior to emerge run --- conf.d/redis | 20 ++ init.d/redis | 33 +++ redis.conf | 786 ++++++++++++++++++++++++++++++++++++++++++++++++++ sentinel.conf | 181 ++++++++++++ 4 files changed, 1020 insertions(+) create mode 100644 conf.d/redis create mode 100755 init.d/redis create mode 100644 redis.conf create mode 100644 sentinel.conf diff --git a/conf.d/redis b/conf.d/redis new file mode 100644 index 0000000..07585fa --- /dev/null +++ b/conf.d/redis @@ -0,0 +1,20 @@ +# Redis user. +REDIS_USER="redis" + +# Redis group. +REDIS_GROUP="redis" + +# Redis configuration file. +REDIS_CONF="/etc/redis.conf" + +# Redis dump directory. +REDIS_DIR="/var/lib/redis" + +# Redis pid file. +# (Be sure to change the main redis configuration file as well if you change +# this from the default.) +REDIS_PID="/var/run/redis/redis.pid" + +# Redis options. +# (Redis expects the first argument to be the configuration file.) +REDIS_OPTS="${REDIS_CONF}" diff --git a/init.d/redis b/init.d/redis new file mode 100755 index 0000000..52b393e --- /dev/null +++ b/init.d/redis @@ -0,0 +1,33 @@ +#!/sbin/runscript +# $Header: /var/cvsroot/gentoo-x86/dev-db/redis/files/redis.initd-4,v 1.4 2015/03/12 12:07:36 mschiff Exp $ + +REDIS_DIR=${REDIS_DIR:-/var/lib/redis} +REDIS_CONF=${REDIS_CONF:-/etc/redis.conf} +REDIS_OPTS=${REDIS_OPTS:-"${REDIS_CONF}"} +REDIS_USER=${REDIS_USER:-redis} +REDIS_GROUP=${REDIS_GROUP:-redis} +REDIS_TIMEOUT=${REDIS_TIMEOUT:-30} + +command=/usr/sbin/redis-server +pidfile=${REDIS_PID:-/run/redis/redis.pid} +start_stop_daemon_args="--background --make-pidfile --pidfile ${pidfile} + --chdir \"${REDIS_DIR}\" --user ${REDIS_USER} --group ${REDIS_GROUP}" +command_args="${REDIS_OPTS}" + +depend() { + use net localmount logger + after keepalived +} + +start_pre() { + checkpath -d -m 0775 -o ${REDIS_USER}:${REDIS_GROUP} $(dirname ${REDIS_PID}) +} + +stop() { + ebegin "Stopping ${SVCNAME}" + start-stop-daemon --stop \ + --exec ${command} \ + --retry ${REDIS_TIMEOUT} \ + --pidfile ${pidfile} + eend +} diff --git a/redis.conf b/redis.conf new file mode 100644 index 0000000..58d1bb6 --- /dev/null +++ b/redis.conf @@ -0,0 +1,786 @@ +# Redis configuration file example + +# Note on units: when memory size is needed, it is possible to specify +# it in the usual form of 1k 5GB 4M and so forth: +# +# 1k => 1000 bytes +# 1kb => 1024 bytes +# 1m => 1000000 bytes +# 1mb => 1024*1024 bytes +# 1g => 1000000000 bytes +# 1gb => 1024*1024*1024 bytes +# +# units are case insensitive so 1GB 1Gb 1gB are all the same. + +################################## INCLUDES ################################### + +# Include one or more other config files here. This is useful if you +# have a standard template that goes to all Redis server but also need +# to customize a few per-server settings. Include files can include +# other files, so use this wisely. +# +# Notice option "include" won't be rewritten by command "CONFIG REWRITE" +# from admin or Redis Sentinel. Since Redis always uses the last processed +# line as value of a configuration directive, you'd better put includes +# at the beginning of this file to avoid overwriting config change at runtime. +# +# If instead you are interested in using includes to override configuration +# options, it is better to use include as the last line. +# +# include /path/to/local.conf +# include /path/to/other.conf + +################################ GENERAL ##################################### + +# By default Redis does not run as a daemon. Use 'yes' if you need it. +# Note that Redis will write a pid file in /var/run/redis.pid when daemonized. +daemonize no + +# When running daemonized, Redis writes a pid file in /var/run/redis.pid by +# default. You can specify a custom pid file location here. +pidfile /run/redis/redis.pid + +# Accept connections on the specified port, default is 6379. +# If port 0 is specified Redis will not listen on a TCP socket. +port 6379 + +# TCP listen() backlog. +# +# In high requests-per-second environments you need an high backlog in order +# to avoid slow clients connections issues. Note that the Linux kernel +# will silently truncate it to the value of /proc/sys/net/core/somaxconn so +# make sure to raise both the value of somaxconn and tcp_max_syn_backlog +# in order to get the desired effect. +tcp-backlog 511 + +# By default Redis listens for connections from all the network interfaces +# available on the server. It is possible to listen to just one or multiple +# interfaces using the "bind" configuration directive, followed by one or +# more IP addresses. +# +# Examples: +# +# bind 192.168.1.100 10.0.0.1 +bind 127.0.0.1 + +# Specify the path for the Unix socket that will be used to listen for +# incoming connections. There is no default, so Redis will not listen +# on a unix socket when not specified. +# +# unixsocket /tmp/redis.sock +# unixsocketperm 700 + +# Close the connection after a client is idle for N seconds (0 to disable) +timeout 0 + +# TCP keepalive. +# +# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence +# of communication. This is useful for two reasons: +# +# 1) Detect dead peers. +# 2) Take the connection alive from the point of view of network +# equipment in the middle. +# +# On Linux, the specified value (in seconds) is the period used to send ACKs. +# Note that to close the connection the double of the time is needed. +# On other kernels the period depends on the kernel configuration. +# +# A reasonable value for this option is 60 seconds. +tcp-keepalive 0 + +# Specify the server verbosity level. +# This can be one of: +# debug (a lot of information, useful for development/testing) +# verbose (many rarely useful info, but not a mess like the debug level) +# notice (moderately verbose, what you want in production probably) +# warning (only very important / critical messages are logged) +loglevel notice + +# Specify the log file name. Also the empty string can be used to force +# Redis to log on the standard output. Note that if you use standard +# output for logging but daemonize, logs will be sent to /dev/null +logfile /var/log/redis/redis.log + +# To enable logging to the system logger, just set 'syslog-enabled' to yes, +# and optionally update the other syslog parameters to suit your needs. +# syslog-enabled no + +# Specify the syslog identity. +# syslog-ident redis + +# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. +# syslog-facility local0 + +# Set the number of databases. The default database is DB 0, you can select +# a different one on a per-connection basis using SELECT where +# dbid is a number between 0 and 'databases'-1 +databases 16 + +################################ SNAPSHOTTING ################################ +# +# Save the DB on disk: +# +# save +# +# Will save the DB if both the given number of seconds and the given +# number of write operations against the DB occurred. +# +# In the example below the behaviour will be to save: +# after 900 sec (15 min) if at least 1 key changed +# after 300 sec (5 min) if at least 10 keys changed +# after 60 sec if at least 10000 keys changed +# +# Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" + +save 900 1 +save 300 10 +save 60 10000 + +# By default Redis will stop accepting writes if RDB snapshots are enabled +# (at least one save point) and the latest background save failed. +# This will make the user aware (in a hard way) that data is not persisting +# on disk properly, otherwise chances are that no one will notice and some +# disaster will happen. +# +# If the background saving process will start working again Redis will +# automatically allow writes again. +# +# However if you have setup your proper monitoring of the Redis server +# and persistence, you may want to disable this feature so that Redis will +# continue to work as usual even if there are problems with disk, +# permissions, and so forth. +stop-writes-on-bgsave-error yes + +# Compress string objects using LZF when dump .rdb databases? +# For default that's set to 'yes' as it's almost always a win. +# If you want to save some CPU in the saving child set it to 'no' but +# the dataset will likely be bigger if you have compressible values or keys. +rdbcompression yes + +# Since version 5 of RDB a CRC64 checksum is placed at the end of the file. +# This makes the format more resistant to corruption but there is a performance +# hit to pay (around 10%) when saving and loading RDB files, so you can disable it +# for maximum performances. +# +# RDB files created with checksum disabled have a checksum of zero that will +# tell the loading code to skip the check. +rdbchecksum yes + +# The filename where to dump the DB +dbfilename dump.rdb + +# The working directory. +# +# The DB will be written inside this directory, with the filename specified +# above using the 'dbfilename' configuration directive. +# +# The Append Only File will also be created inside this directory. +# +# Note that you must specify a directory here, not a file name. +dir /var/lib/redis/ + +################################# REPLICATION ################################# + +# Master-Slave replication. Use slaveof to make a Redis instance a copy of +# another Redis server. A few things to understand ASAP about Redis replication. +# +# 1) Redis replication is asynchronous, but you can configure a master to +# stop accepting writes if it appears to be not connected with at least +# a given number of slaves. +# 2) Redis slaves are able to perform a partial resynchronization with the +# master if the replication link is lost for a relatively small amount of +# time. You may want to configure the replication backlog size (see the next +# sections of this file) with a sensible value depending on your needs. +# 3) Replication is automatic and does not need user intervention. After a +# network partition slaves automatically try to reconnect to masters +# and resynchronize with them. +# +# slaveof + +# If the master is password protected (using the "requirepass" configuration +# directive below) it is possible to tell the slave to authenticate before +# starting the replication synchronization process, otherwise the master will +# refuse the slave request. +# +# masterauth + +# When a slave loses its connection with the master, or when the replication +# is still in progress, the slave can act in two different ways: +# +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will +# still reply to client requests, possibly with out of date data, or the +# data set may just be empty if this is the first synchronization. +# +# 2) if slave-serve-stale-data is set to 'no' the slave will reply with +# an error "SYNC with master in progress" to all the kind of commands +# but to INFO and SLAVEOF. +# +slave-serve-stale-data yes + +# You can configure a slave instance to accept writes or not. Writing against +# a slave instance may be useful to store some ephemeral data (because data +# written on a slave will be easily deleted after resync with the master) but +# may also cause problems if clients are writing to it because of a +# misconfiguration. +# +# Since Redis 2.6 by default slaves are read-only. +# +# Note: read only slaves are not designed to be exposed to untrusted clients +# on the internet. It's just a protection layer against misuse of the instance. +# Still a read only slave exports by default all the administrative commands +# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve +# security of read only slaves using 'rename-command' to shadow all the +# administrative / dangerous commands. +slave-read-only yes + +# Slaves send PINGs to server in a predefined interval. It's possible to change +# this interval with the repl_ping_slave_period option. The default value is 10 +# seconds. +# +# repl-ping-slave-period 10 + +# The following option sets the replication timeout for: +# +# 1) Bulk transfer I/O during SYNC, from the point of view of slave. +# 2) Master timeout from the point of view of slaves (data, pings). +# 3) Slave timeout from the point of view of masters (REPLCONF ACK pings). +# +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# +# repl-timeout 60 + +# Disable TCP_NODELAY on the slave socket after SYNC? +# +# If you select "yes" Redis will use a smaller number of TCP packets and +# less bandwidth to send data to slaves. But this can add a delay for +# the data to appear on the slave side, up to 40 milliseconds with +# Linux kernels using a default configuration. +# +# If you select "no" the delay for data to appear on the slave side will +# be reduced but more bandwidth will be used for replication. +# +# By default we optimize for low latency, but in very high traffic conditions +# or when the master and slaves are many hops away, turning this to "yes" may +# be a good idea. +repl-disable-tcp-nodelay no + +# Set the replication backlog size. The backlog is a buffer that accumulates +# slave data when slaves are disconnected for some time, so that when a slave +# wants to reconnect again, often a full resync is not needed, but a partial +# resync is enough, just passing the portion of data the slave missed while +# disconnected. +# +# The biggest the replication backlog, the longer the time the slave can be +# disconnected and later be able to perform a partial resynchronization. +# +# The backlog is only allocated once there is at least a slave connected. +# +# repl-backlog-size 1mb + +# After a master has no longer connected slaves for some time, the backlog +# will be freed. The following option configures the amount of seconds that +# need to elapse, starting from the time the last slave disconnected, for +# the backlog buffer to be freed. +# +# A value of 0 means to never release the backlog. +# +# repl-backlog-ttl 3600 + +# The slave priority is an integer number published by Redis in the INFO output. +# It is used by Redis Sentinel in order to select a slave to promote into a +# master if the master is no longer working correctly. +# +# A slave with a low priority number is considered better for promotion, so +# for instance if there are three slaves with priority 10, 100, 25 Sentinel will +# pick the one with priority 10, that is the lowest. +# +# However a special priority of 0 marks the slave as not able to perform the +# role of master, so a slave with priority of 0 will never be selected by +# Redis Sentinel for promotion. +# +# By default the priority is 100. +slave-priority 100 + +# It is possible for a master to stop accepting writes if there are less than +# N slaves connected, having a lag less or equal than M seconds. +# +# The N slaves need to be in "online" state. +# +# The lag in seconds, that must be <= the specified value, is calculated from +# the last ping received from the slave, that is usually sent every second. +# +# This option does not GUARANTEES that N replicas will accept the write, but +# will limit the window of exposure for lost writes in case not enough slaves +# are available, to the specified number of seconds. +# +# For example to require at least 3 slaves with a lag <= 10 seconds use: +# +# min-slaves-to-write 3 +# min-slaves-max-lag 10 +# +# Setting one or the other to 0 disables the feature. +# +# By default min-slaves-to-write is set to 0 (feature disabled) and +# min-slaves-max-lag is set to 10. + +################################## SECURITY ################################### + +# Require clients to issue AUTH before processing any other +# commands. This might be useful in environments in which you do not trust +# others with access to the host running redis-server. +# +# This should stay commented out for backward compatibility and because most +# people do not need auth (e.g. they run their own servers). +# +# Warning: since Redis is pretty fast an outside user can try up to +# 150k passwords per second against a good box. This means that you should +# use a very strong password otherwise it will be very easy to break. +# +# requirepass foobared + +# Command renaming. +# +# It is possible to change the name of dangerous commands in a shared +# environment. For instance the CONFIG command may be renamed into something +# hard to guess so that it will still be available for internal-use tools +# but not available for general clients. +# +# Example: +# +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 +# +# It is also possible to completely kill a command by renaming it into +# an empty string: +# +# rename-command CONFIG "" +# +# Please note that changing the name of commands that are logged into the +# AOF file or transmitted to slaves may cause problems. + +################################### LIMITS #################################### + +# Set the max number of connected clients at the same time. By default +# this limit is set to 10000 clients, however if the Redis server is not +# able to configure the process file limit to allow for the specified limit +# the max number of allowed clients is set to the current file limit +# minus 32 (as Redis reserves a few file descriptors for internal uses). +# +# Once the limit is reached Redis will close all the new connections sending +# an error 'max number of clients reached'. +# +# maxclients 10000 + +# Don't use more memory than the specified amount of bytes. +# When the memory limit is reached Redis will try to remove keys +# according to the eviction policy selected (see maxmemory-policy). +# +# If Redis can't remove keys according to the policy, or if the policy is +# set to 'noeviction', Redis will start to reply with errors to commands +# that would use more memory, like SET, LPUSH, and so on, and will continue +# to reply to read-only commands like GET. +# +# This option is usually useful when using Redis as an LRU cache, or to set +# a hard memory limit for an instance (using the 'noeviction' policy). +# +# WARNING: If you have slaves attached to an instance with maxmemory on, +# the size of the output buffers needed to feed the slaves are subtracted +# from the used memory count, so that network problems / resyncs will +# not trigger a loop where keys are evicted, and in turn the output +# buffer of slaves is full with DELs of keys evicted triggering the deletion +# of more keys, and so forth until the database is completely emptied. +# +# In short... if you have slaves attached it is suggested that you set a lower +# limit for maxmemory so that there is some free RAM on the system for slave +# output buffers (but this is not needed if the policy is 'noeviction'). +# +# maxmemory +maxmemory 67108864 + +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory +# is reached. You can select among five behaviors: +# +# volatile-lru -> remove the key with an expire set using an LRU algorithm +# allkeys-lru -> remove any key accordingly to the LRU algorithm +# volatile-random -> remove a random key with an expire set +# allkeys-random -> remove a random key, any key +# volatile-ttl -> remove the key with the nearest expire time (minor TTL) +# noeviction -> don't expire at all, just return an error on write operations +# +# Note: with any of the above policies, Redis will return an error on write +# operations, when there are not suitable keys for eviction. +# +# At the date of writing this commands are: set setnx setex append +# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd +# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby +# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby +# getset mset msetnx exec sort +# +# The default is: +# +# maxmemory-policy volatile-lru + +# LRU and minimal TTL algorithms are not precise algorithms but approximated +# algorithms (in order to save memory), so you can select as well the sample +# size to check. For instance for default Redis will check three keys and +# pick the one that was used less recently, you can change the sample size +# using the following configuration directive. +# +# maxmemory-samples 3 + +############################## APPEND ONLY MODE ############################### + +# By default Redis asynchronously dumps the dataset on disk. This mode is +# good enough in many applications, but an issue with the Redis process or +# a power outage may result into a few minutes of writes lost (depending on +# the configured save points). +# +# The Append Only File is an alternative persistence mode that provides +# much better durability. For instance using the default data fsync policy +# (see later in the config file) Redis can lose just one second of writes in a +# dramatic event like a server power outage, or a single write if something +# wrong with the Redis process itself happens, but the operating system is +# still running correctly. +# +# AOF and RDB persistence can be enabled at the same time without problems. +# If the AOF is enabled on startup Redis will load the AOF, that is the file +# with the better durability guarantees. +# +# Please check http://redis.io/topics/persistence for more information. + +appendonly no + +# The name of the append only file (default: "appendonly.aof") + +appendfilename "appendonly.aof" + +# The fsync() call tells the Operating System to actually write data on disk +# instead to wait for more data in the output buffer. Some OS will really flush +# data on disk, some other OS will just try to do it ASAP. +# +# Redis supports three different modes: +# +# no: don't fsync, just let the OS flush the data when it wants. Faster. +# always: fsync after every write to the append only log . Slow, Safest. +# everysec: fsync only one time every second. Compromise. +# +# The default is "everysec", as that's usually the right compromise between +# speed and data safety. It's up to you to understand if you can relax this to +# "no" that will let the operating system flush the output buffer when +# it wants, for better performances (but if you can live with the idea of +# some data loss consider the default persistence mode that's snapshotting), +# or on the contrary, use "always" that's very slow but a bit safer than +# everysec. +# +# More details please check the following article: +# http://antirez.com/post/redis-persistence-demystified.html +# +# If unsure, use "everysec". + +# appendfsync always +appendfsync everysec +# appendfsync no + +# When the AOF fsync policy is set to always or everysec, and a background +# saving process (a background save or AOF log background rewriting) is +# performing a lot of I/O against the disk, in some Linux configurations +# Redis may block too long on the fsync() call. Note that there is no fix for +# this currently, as even performing fsync in a different thread will block +# our synchronous write(2) call. +# +# In order to mitigate this problem it's possible to use the following option +# that will prevent fsync() from being called in the main process while a +# BGSAVE or BGREWRITEAOF is in progress. +# +# This means that while another child is saving, the durability of Redis is +# the same as "appendfsync none". In practical terms, this means that it is +# possible to lose up to 30 seconds of log in the worst scenario (with the +# default Linux settings). +# +# If you have latency problems turn this to "yes". Otherwise leave it as +# "no" that is the safest pick from the point of view of durability. + +no-appendfsync-on-rewrite no + +# Automatic rewrite of the append only file. +# Redis is able to automatically rewrite the log file implicitly calling +# BGREWRITEAOF when the AOF log size grows by the specified percentage. +# +# This is how it works: Redis remembers the size of the AOF file after the +# latest rewrite (if no rewrite has happened since the restart, the size of +# the AOF at startup is used). +# +# This base size is compared to the current size. If the current size is +# bigger than the specified percentage, the rewrite is triggered. Also +# you need to specify a minimal size for the AOF file to be rewritten, this +# is useful to avoid rewriting the AOF file even if the percentage increase +# is reached but it is still pretty small. +# +# Specify a percentage of zero in order to disable the automatic AOF +# rewrite feature. + +auto-aof-rewrite-percentage 100 +auto-aof-rewrite-min-size 64mb + +# An AOF file may be found to be truncated at the end during the Redis +# startup process, when the AOF data gets loaded back into memory. +# This may happen when the system where Redis is running +# crashes, especially when an ext4 filesystem is mounted without the +# data=ordered option (however this can't happen when Redis itself +# crashes or aborts but the operating system still works correctly). +# +# Redis can either exit with an error when this happens, or load as much +# data as possible (the default now) and start if the AOF file is found +# to be truncated at the end. The following option controls this behavior. +# +# If aof-load-truncated is set to yes, a truncated AOF file is loaded and +# the Redis server starts emitting a log to inform the user of the event. +# Otherwise if the option is set to no, the server aborts with an error +# and refuses to start. When the option is set to no, the user requires +# to fix the AOF file using the "redis-check-aof" utility before to restart +# the server. +# +# Note that if the AOF file will be found to be corrupted in the middle +# the server will still exit with an error. This option only applies when +# Redis will try to read more data from the AOF file but not enough bytes +# will be found. +aof-load-truncated yes + +################################ LUA SCRIPTING ############################### + +# Max execution time of a Lua script in milliseconds. +# +# If the maximum execution time is reached Redis will log that a script is +# still in execution after the maximum allowed time and will start to +# reply to queries with an error. +# +# When a long running script exceed the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write commands was +# already issue by the script but the user don't want to wait for the natural +# termination of the script. +# +# Set it to 0 or a negative value for unlimited execution without warnings. +lua-time-limit 5000 + +################################## SLOW LOG ################################### + +# The Redis Slow Log is a system to log queries that exceeded a specified +# execution time. The execution time does not include the I/O operations +# like talking with the client, sending the reply and so forth, +# but just the time needed to actually execute the command (this is the only +# stage of command execution where the thread is blocked and can not serve +# other requests in the meantime). +# +# You can configure the slow log with two parameters: one tells Redis +# what is the execution time, in microseconds, to exceed in order for the +# command to get logged, and the other parameter is the length of the +# slow log. When a new command is logged the oldest one is removed from the +# queue of logged commands. + +# The following time is expressed in microseconds, so 1000000 is equivalent +# to one second. Note that a negative number disables the slow log, while +# a value of zero forces the logging of every command. +slowlog-log-slower-than 10000 + +# There is no limit to this length. Just be aware that it will consume memory. +# You can reclaim memory used by the slow log with SLOWLOG RESET. +slowlog-max-len 128 + +################################ LATENCY MONITOR ############################## + +# The Redis latency monitoring subsystem samples different operations +# at runtime in order to collect data related to possible sources of +# latency of a Redis instance. +# +# Via the LATENCY command this information is available to the user that can +# print graphs and obtain reports. +# +# The system only logs operations that were performed in a time equal or +# greater than the amount of milliseconds specified via the +# latency-monitor-threshold configuration directive. When its value is set +# to zero, the latency monitor is turned off. +# +# By default latency monitoring is disabled since it is mostly not needed +# if you don't have latency issues, and collecting data has a performance +# impact, that while very small, can be measured under big load. Latency +# monitoring can easily be enalbed at runtime using the command +# "CONFIG SET latency-monitor-threshold " if needed. +latency-monitor-threshold 0 + +############################# Event notification ############################## + +# Redis can notify Pub/Sub clients about events happening in the key space. +# This feature is documented at http://redis.io/topics/notifications +# +# For instance if keyspace events notification is enabled, and a client +# performs a DEL operation on key "foo" stored in the Database 0, two +# messages will be published via Pub/Sub: +# +# PUBLISH __keyspace@0__:foo del +# PUBLISH __keyevent@0__:del foo +# +# It is possible to select the events that Redis will notify among a set +# of classes. Every class is identified by a single character: +# +# K Keyspace events, published with __keyspace@__ prefix. +# E Keyevent events, published with __keyevent@__ prefix. +# g Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ... +# $ String commands +# l List commands +# s Set commands +# h Hash commands +# z Sorted set commands +# x Expired events (events generated every time a key expires) +# e Evicted events (events generated when a key is evicted for maxmemory) +# A Alias for g$lshzxe, so that the "AKE" string means all the events. +# +# The "notify-keyspace-events" takes as argument a string that is composed +# by zero or multiple characters. The empty string means that notifications +# are disabled at all. +# +# Example: to enable list and generic events, from the point of view of the +# event name, use: +# +# notify-keyspace-events Elg +# +# Example 2: to get the stream of the expired keys subscribing to channel +# name __keyevent@0__:expired use: +# +# notify-keyspace-events Ex +# +# By default all notifications are disabled because most users don't need +# this feature and the feature has some overhead. Note that if you don't +# specify at least one of K or E, no events will be delivered. +notify-keyspace-events "" + +############################### ADVANCED CONFIG ############################### + +# Hashes are encoded using a memory efficient data structure when they have a +# small number of entries, and the biggest entry does not exceed a given +# threshold. These thresholds can be configured using the following directives. +hash-max-ziplist-entries 512 +hash-max-ziplist-value 64 + +# Similarly to hashes, small lists are also encoded in a special way in order +# to save a lot of space. The special representation is only used when +# you are under the following limits: +list-max-ziplist-entries 512 +list-max-ziplist-value 64 + +# Sets have a special encoding in just one case: when a set is composed +# of just strings that happens to be integers in radix 10 in the range +# of 64 bit signed integers. +# The following configuration setting sets the limit in the size of the +# set in order to use this special memory saving encoding. +set-max-intset-entries 512 + +# Similarly to hashes and lists, sorted sets are also specially encoded in +# order to save a lot of space. This encoding is only used when the length and +# elements of a sorted set are below the following limits: +zset-max-ziplist-entries 128 +zset-max-ziplist-value 64 + +# HyperLogLog sparse representation bytes limit. The limit includes the +# 16 bytes header. When an HyperLogLog using the sparse representation crosses +# this limit, it is converted into the dense representation. +# +# A value greater than 16000 is totally useless, since at that point the +# dense representation is more memory efficient. +# +# The suggested value is ~ 3000 in order to have the benefits of +# the space efficient encoding without slowing down too much PFADD, +# which is O(N) with the sparse encoding. The value can be raised to +# ~ 10000 when CPU is not a concern, but space is, and the data set is +# composed of many HyperLogLogs with cardinality in the 0 - 15000 range. +hll-sparse-max-bytes 3000 + +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in +# order to help rehashing the main Redis hash table (the one mapping top-level +# keys to values). The hash table implementation Redis uses (see dict.c) +# performs a lazy rehashing: the more operation you run into a hash table +# that is rehashing, the more rehashing "steps" are performed, so if the +# server is idle the rehashing is never complete and some more memory is used +# by the hash table. +# +# The default is to use this millisecond 10 times every second in order to +# active rehashing the main dictionaries, freeing memory when possible. +# +# If unsure: +# use "activerehashing no" if you have hard latency requirements and it is +# not a good thing in your environment that Redis can reply form time to time +# to queries with 2 milliseconds delay. +# +# use "activerehashing yes" if you don't have such hard requirements but +# want to free memory asap when possible. +activerehashing yes + +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients including MONITOR clients +# slave -> slave clients +# pubsub -> clients subscribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled by setting them to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + +# Redis calls an internal function to perform many background tasks, like +# closing connections of clients in timeout, purging expired keys that are +# never requested, and so forth. +# +# Not all tasks are performed with the same frequency, but Redis checks for +# tasks to perform accordingly to the specified "hz" value. +# +# By default "hz" is set to 10. Raising the value will use more CPU when +# Redis is idle, but at the same time will make Redis more responsive when +# there are many keys expiring at the same time, and timeouts may be +# handled with more precision. +# +# The range is between 1 and 500, however a value over 100 is usually not +# a good idea. Most users should use the default of 10 and raise this up to +# 100 only in environments where very low latency is required. +hz 10 + +# When a child rewrites the AOF file, if the following option is enabled +# the file will be fsync-ed every 32 MB of data generated. This is useful +# in order to commit the file to the disk more incrementally and avoid +# big latency spikes. +aof-rewrite-incremental-fsync yes + diff --git a/sentinel.conf b/sentinel.conf new file mode 100644 index 0000000..4b3b792 --- /dev/null +++ b/sentinel.conf @@ -0,0 +1,181 @@ +# Example sentinel.conf + +# port +# The port that this sentinel instance will run on +port 26379 + +# sentinel announce-ip +# sentinel announce-port +# +# The above two configuration directives are useful in environments where, +# because of NAT, Sentinel is reachable from outside via a non-local address. +# +# When announce-ip is provided, the Sentinel will claim the specified IP address +# in HELLO messages used to gossip its presence, instead of auto-detecting the +# local address as it usually does. +# +# Similarly when announce-port is provided and is valid and non-zero, Sentinel +# will announce the specified TCP port. +# +# The two options don't need to be used together, if only announce-ip is +# provided, the Sentinel will announce the specified IP and the server port +# as specified by the "port" option. If only announce-port is provided, the +# Sentinel will announce the auto-detected local IP and the specified port. +# +# Example: +# +# sentinel announce-ip 1.2.3.4 + +# dir +# Every long running process should have a well-defined working directory. +# For Redis Sentinel to chdir to /tmp at startup is the simplest thing +# for the process to don't interferer with administrative tasks such as +# unmounting filesystems. +dir /tmp + +# sentinel monitor +# +# Tells Sentinel to monitor this master, and to consider it in O_DOWN +# (Objectively Down) state only if at least sentinels agree. +# +# Note that whatever is the ODOWN quorum, a Sentinel will require to +# be elected by the majority of the known Sentinels in order to +# start a failover, so no failover can be performed in minority. +# +# Slaves are auto-discovered, so you don't need to specify slaves in +# any way. Sentinel itself will rewrite this configuration file adding +# the slaves using additional configuration options. +# Also note that the configuration file is rewritten when a +# slave is promoted to master. +# +# Note: master name should not include special characters or spaces. +# The valid charset is A-z 0-9 and the three characters ".-_". +sentinel monitor mymaster 127.0.0.1 6379 2 + +# sentinel auth-pass +# +# Set the password to use to authenticate with the master and slaves. +# Useful if there is a password set in the Redis instances to monitor. +# +# Note that the master password is also used for slaves, so it is not +# possible to set a different password in masters and slaves instances +# if you want to be able to monitor these instances with Sentinel. +# +# However you can have Redis instances without the authentication enabled +# mixed with Redis instances requiring the authentication (as long as the +# password set is the same for all the instances requiring the password) as +# the AUTH command will have no effect in Redis instances with authentication +# switched off. +# +# Example: +# +# sentinel auth-pass mymaster MySUPER--secret-0123passw0rd + +# sentinel down-after-milliseconds +# +# Number of milliseconds the master (or any attached slave or sentinel) should +# be unreachable (as in, not acceptable reply to PING, continuously, for the +# specified period) in order to consider it in S_DOWN state (Subjectively +# Down). +# +# Default is 30 seconds. +sentinel down-after-milliseconds mymaster 30000 + +# sentinel parallel-syncs +# +# How many slaves we can reconfigure to point to the new slave simultaneously +# during the failover. Use a low number if you use the slaves to serve query +# to avoid that all the slaves will be unreachable at about the same +# time while performing the synchronization with the master. +sentinel parallel-syncs mymaster 1 + +# sentinel failover-timeout +# +# Specifies the failover timeout in milliseconds. It is used in many ways: +# +# - The time needed to re-start a failover after a previous failover was +# already tried against the same master by a given Sentinel, is two +# times the failover timeout. +# +# - The time needed for a slave replicating to a wrong master according +# to a Sentinel current configuration, to be forced to replicate +# with the right master, is exactly the failover timeout (counting since +# the moment a Sentinel detected the misconfiguration). +# +# - The time needed to cancel a failover that is already in progress but +# did not produced any configuration change (SLAVEOF NO ONE yet not +# acknowledged by the promoted slave). +# +# - The maximum time a failover in progress waits for all the slaves to be +# reconfigured as slaves of the new master. However even after this time +# the slaves will be reconfigured by the Sentinels anyway, but not with +# the exact parallel-syncs progression as specified. +# +# Default is 3 minutes. +sentinel failover-timeout mymaster 180000 + +# SCRIPTS EXECUTION +# +# sentinel notification-script and sentinel reconfig-script are used in order +# to configure scripts that are called to notify the system administrator +# or to reconfigure clients after a failover. The scripts are executed +# with the following rules for error handling: +# +# If script exits with "1" the execution is retried later (up to a maximum +# number of times currently set to 10). +# +# If script exits with "2" (or an higher value) the script execution is +# not retried. +# +# If script terminates because it receives a signal the behavior is the same +# as exit code 1. +# +# A script has a maximum running time of 60 seconds. After this limit is +# reached the script is terminated with a SIGKILL and the execution retried. + +# NOTIFICATION SCRIPT +# +# sentinel notification-script +# +# Call the specified notification script for any sentinel event that is +# generated in the WARNING level (for instance -sdown, -odown, and so forth). +# This script should notify the system administrator via email, SMS, or any +# other messaging system, that there is something wrong with the monitored +# Redis systems. +# +# The script is called with just two arguments: the first is the event type +# and the second the event description. +# +# The script must exist and be executable in order for sentinel to start if +# this option is provided. +# +# Example: +# +# sentinel notification-script mymaster /var/redis/notify.sh + +# CLIENTS RECONFIGURATION SCRIPT +# +# sentinel client-reconfig-script +# +# When the master changed because of a failover a script can be called in +# order to perform application-specific tasks to notify the clients that the +# configuration has changed and the master is at a different address. +# +# The following arguments are passed to the script: +# +# +# +# is currently always "failover" +# is either "leader" or "observer" +# +# The arguments from-ip, from-port, to-ip, to-port are used to communicate +# the old address of the master and the new address of the elected slave +# (now a master). +# +# This script should be resistant to multiple invocations. +# +# Example: +# +# sentinel client-reconfig-script mymaster /var/redis/reconfig.sh + +