diff --git a/conf.d/._cfg0000_alsasound b/conf.d/._cfg0000_alsasound
new file mode 100644
index 0000000..6fec8f5
--- /dev/null
+++ b/conf.d/._cfg0000_alsasound
@@ -0,0 +1,15 @@
+# RESTORE_ON_START:
+# Do you want to restore your mixer settings?  If not, your cards will be
+# muted.
+# no - Do not restore state
+# yes - Restore state
+
+RESTORE_ON_START="yes"
+
+# SAVE_ON_STOP:
+# Do you want to save changes made to your mixer volumes when alsasound
+# stops? 
+# no - Do not save state
+# yes - Save state
+
+SAVE_ON_STOP="yes"
diff --git a/init.d/._cfg0000_alsasound b/init.d/._cfg0000_alsasound
new file mode 100755
index 0000000..6a3196f
--- /dev/null
+++ b/init.d/._cfg0000_alsasound
@@ -0,0 +1,88 @@
+#!/sbin/runscript
+# $Id$
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+alsastatedir=/var/lib/alsa
+alsascrdir=/etc/alsa.d
+alsahomedir=/var/run/alsasound
+
+extra_commands="save restore"
+
+depend() {
+	need localmount
+	after bootmisc modules isapnp coldplug hotplug
+}
+
+restore() {
+	ebegin "Restoring Mixer Levels"
+
+	checkpath -q -d -m 0700 -o root:root ${alsahomedir} || return 1
+
+	if [ ! -r "${alsastatedir}/asound.state" ] ; then
+		ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!"
+		eend 0
+		return 0
+	fi
+
+	local cards="$(sed -n -e 's/ *\([[:digit:]]*\) .*/\1/p' /proc/asound/cards)"
+	local CARDNUM
+	for cardnum in ${cards}; do
+		[ -e /dev/snd/controlC${cardnum} ] || sleep 2
+		[ -e /dev/snd/controlC${cardnum} ] || sleep 2
+		[ -e /dev/snd/controlC${cardnum} ] || sleep 2
+		[ -e /dev/snd/controlC${cardnum} ] || sleep 2
+		alsactl -E HOME="${alsahomedir}" -I -f "${alsastatedir}/asound.state" restore ${cardnum} \
+			|| ewarn "Errors while restoring defaults, ignoring"
+	done
+
+	for ossfile in "${alsastatedir}"/oss/card*_pcm* ; do
+		[ -e "${ossfile}" ] || continue
+		# We use cat because I'm not sure if cp works properly on /proc
+		local procfile=${ossfile##${alsastatedir}/oss}
+		procfile="$(echo "${procfile}" | sed -e 's,_,/,g')"
+		if [ -e /proc/asound/"${procfile}"/oss ] ; then
+		    cat "${ossfile}" > /proc/asound/"${procfile}"/oss 
+		fi
+	done
+
+	eend 0
+}
+
+save() {
+	ebegin "Storing ALSA Mixer Levels"
+
+	checkpath -q -d -m 0700 -o root:root ${alsahomedir} || return 1
+
+	mkdir -p "${alsastatedir}"
+	if ! alsactl -E HOME="${alsahomedir}" -f "${alsastatedir}/asound.state" store; then
+		eerror "Error saving levels."
+		eend 1
+		return 1
+	fi
+
+	for ossfile in /proc/asound/card*/pcm*/oss; do
+		[ -e "${ossfile}" ] || continue
+		local device=${ossfile##/proc/asound/} ; device=${device%%/oss}
+		device="$(echo "${device}" | sed -e 's,/,_,g')"
+		mkdir -p "${alsastatedir}/oss/"
+		cp "${ossfile}" "${alsastatedir}/oss/${device}"
+	done
+
+	eend 0
+}
+
+start() {
+	if [ "${RESTORE_ON_START}" = "yes" ]; then
+		restore
+	fi
+
+	return 0
+}
+
+stop() {
+	if [ "${SAVE_ON_STOP}" = "yes" ]; then
+		save
+	fi
+	return 0
+}
diff --git a/modprobe.d/._cfg0000_alsa.conf b/modprobe.d/._cfg0000_alsa.conf
new file mode 100644
index 0000000..40e99df
--- /dev/null
+++ b/modprobe.d/._cfg0000_alsa.conf
@@ -0,0 +1,38 @@
+# Alsa kernel modules' configuration file.
+
+# ALSA portion
+alias char-major-116 snd
+# OSS/Free portion
+alias char-major-14 soundcore
+
+##
+## IMPORTANT:
+## You need to customise this section for your specific sound card(s)
+## and then run `update-modules' command.
+## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
+##
+##  ALSA portion
+## alias snd-card-0 snd-interwave
+## alias snd-card-1 snd-ens1371
+##  OSS/Free portion
+## alias sound-slot-0 snd-card-0
+## alias sound-slot-1 snd-card-1
+##
+
+# OSS/Free portion - card #1
+alias sound-service-0-0 snd-mixer-oss
+alias sound-service-0-1 snd-seq-oss
+alias sound-service-0-3 snd-pcm-oss
+alias sound-service-0-8 snd-seq-oss
+alias sound-service-0-12 snd-pcm-oss
+##  OSS/Free portion - card #2
+## alias sound-service-1-0 snd-mixer-oss
+## alias sound-service-1-3 snd-pcm-oss
+## alias sound-service-1-12 snd-pcm-oss
+
+alias /dev/mixer snd-mixer-oss
+alias /dev/dsp snd-pcm-oss
+alias /dev/midi snd-seq-oss
+
+# Set this to the correct number of cards.
+options snd cards_limit=1