hasufell/etc-gentoo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

saving uncommitted changes in /etc prior to emerge run

Browse Source
This commit is contained in:
hasufell
2015-02-27 01:58:55 +01:00
committed by root
commit b3cea8d893
2385 changed files with 507432 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

131
apache2/modules.d/._cfg0000_00_default_settings.conf Normal file
View File

@@ -0,0 +1,131 @@
# This configuration file reflects default settings for Apache HTTP Server.
# You may change these, but chances are that you may not need to.
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# TraceEnable
# This directive overrides the behavior of TRACE for both the core server and
# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
# which disallows any request body to accompany the request. TraceEnable off
# causes the core server and mod_proxy to return a 405 (Method not allowed)
# error to the client.
# For security reasons this is turned off by default. (bug #240680)
TraceEnable off
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
EnableMMAP On
EnableSendfile Off
# FileETag: Configures the file attributes that are used to create
# the ETag (entity tag) response header field when the document is
# based on a static file. (The ETag value is used in cache management
# to save network bandwidth.)
FileETag MTime Size
# ContentDigest: This directive enables the generation of Content-MD5
# headers as defined in RFC1864 respectively RFC2616.
# The Content-MD5 header provides an end-to-end message integrity
# check (MIC) of the entity-body. A proxy or client may check this
# header for detecting accidental modification of the entity-body
# in transit.
# Note that this can cause performance problems on your server since
# the message digest is computed on every request (the values are
# not cached).
# Content-MD5 is only sent for documents served by the core, and not
# by any module. For example, SSI documents, output from CGI scripts,
# and byte range responses do not have this header.
ContentDigest Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# We configure the "default" to be a very restrictive set of features.
<Directory />
Options FollowSymLinks
AllowOverride None
Require all denied
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Options can be used for the
# same purpose, but it is much slower.
#
# Do not change this entry unless you know what you are doing.
<IfModule dir_module>
DirectoryIndex index.html index.html.var
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Require all denied
</FilesMatch>
# vim: ts=4 filetype=apache

57
apache2/modules.d/._cfg0000_00_error_documents.conf Normal file
View File

@@ -0,0 +1,57 @@
# The configuration below implements multi-language error documents through
# content-negotiation.
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Required modules: mod_alias, mod_include, mod_negotiation
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /var/www/localhost/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
<IfDefine ERRORDOCS>
Alias /error/ "/usr/share/apache2/error/"
<Directory "/usr/share/apache2/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Require all granted
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfDefine>
# vim: ts=4 filetype=apache

86
apache2/modules.d/._cfg0000_00_mod_autoindex.conf Normal file
View File

@@ -0,0 +1,86 @@
<IfModule autoindex_module>
<IfDefine !NO_AUTOINDEX_CONF>
<IfModule alias_module>
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# Directives controlling the display of server-generated directory listings.
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfDefine>
</IfModule>
# vim: ts=4 filetype=apache

10
apache2/modules.d/._cfg0000_00_mod_info.conf Normal file
View File

@@ -0,0 +1,10 @@
<IfDefine INFO>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info
<Location /server-info>
SetHandler server-info
Require local
</Location>
</IfDefine>
# vim: ts=4 filetype=apache

46
apache2/modules.d/._cfg0000_00_mod_mime.conf Normal file
View File

@@ -0,0 +1,46 @@
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /etc/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
<IfModule mime_magic_module>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile /etc/apache2/magic
</IfModule>
# vim: ts=4 filetype=apache

15
apache2/modules.d/._cfg0000_00_mod_status.conf Normal file
View File

@@ -0,0 +1,15 @@
<IfDefine STATUS>
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<Location /server-status>
SetHandler server-status
Require local
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called.
ExtendedStatus On
</IfDefine>
# vim: ts=4 filetype=apache

32
apache2/modules.d/._cfg0000_00_mod_userdir.conf Normal file
View File

@@ -0,0 +1,32 @@
# Settings for user home directories
<IfDefine USERDIR>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Require all granted
</Limit>
<LimitExcept GET POST OPTIONS>
Require all denied
</LimitExcept>
</Directory>
# Suexec isn't really required to run cgi-scripts, but it's a really good
# idea if you have multiple users serving websites...
<IfDefine SUEXEC>
<Directory /home/*/public_html/cgi-bin>
Options ExecCGI
SetHandler cgi-script
</Directory>
</IfDefine>
</IfDefine>
# vim: ts=4 filetype=apache

99
apache2/modules.d/._cfg0000_00_mpm.conf Normal file
View File

@@ -0,0 +1,99 @@
# Server-Pool Management (MPM specific)
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# DO NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING
PidFile /run/apache2.pid
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
# Mutex file:/run/apache_mpm_mutex
# Only one of the below sections will be relevant on your
# installed httpd. Use "/usr/sbin/apache2 -l" to find out the
# active mpm.
# common MPM configuration
# These configuration directives apply to all MPMs
#
# StartServers: Number of child server processes created at startup
# MaxRequestWorkers: Maximum number of child processes to serve requests
# MaxConnectionsPerChild: Limit on the number of connections that an individual
# child server will handle during its life
# prefork MPM
# This is the default MPM if USE=-threads
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
</IfModule>
# worker MPM
# This is the default MPM if USE=threads
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
</IfModule>
# event MPM
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
<IfModule mpm_event_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
</IfModule>
# peruser MPM
#
# MinSpareProcessors: Minimum number of idle child server processes
# MinProcessors: Minimum number of processors per virtual host
# MaxProcessors: Maximum number of processors per virtual host
# ExpireTimeout: Maximum idle time before a child is killed, 0 to disable
# Multiplexer: Specify a Multiplexer child configuration.
# Processor: Specify a user and group for a specific child process
<IfModule mpm_peruser_module>
MinSpareProcessors 2
MinProcessors 2
MaxProcessors 10
MaxRequestWorkers 150
MaxConnectionsPerChild 1000
ExpireTimeout 1800
Multiplexer nobody nobody
Processor apache apache
</IfModule>
# itk MPM
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
<IfModule mpm_itk_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxRequestWorkers 150
MaxConnectionsPerChild 10000
</IfModule>
# vim: ts=4 filetype=apache

67
apache2/modules.d/._cfg0000_40_mod_ssl.conf Normal file
View File

@@ -0,0 +1,67 @@
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
<IfDefine SSL>
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
## Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
## SSL Global Context:
# All SSL configuration in this context applies both to the main server and
# all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
<IfModule mime_module>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfModule>
## Pass Phrase Dialog:
# Configure the pass phrase gathering process. The filtering dialog program
# (`builtin' is a internal terminal dialog) has to provide the pass phrase on
# stdout.
SSLPassPhraseDialog builtin
## Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism to use and second the
# expiring timeout (in seconds).
#SSLSessionCache dbm:/var/run/ssl_scache
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
## Semaphore:
# Configure the path to the mutual exclusion semaphore the SSL engine uses
# internally for inter-process synchronization.
SSLMutex file:/var/run/ssl_mutex
## SSL Compression:
# Known to be vulnerable thus disabled by default (bug #507324).
SSLCompression off
</IfDefine>
# vim: ts=4 filetype=apache

18
apache2/modules.d/._cfg0000_46_mod_ldap.conf Normal file
View File

@@ -0,0 +1,18 @@
# Examples below are taken from the online documentation
# Refer to:
# http://localhost/manual/mod/mod_ldap.html
# http://localhost/manual/mod/mod_auth_ldap.html
<IfDefine LDAP>
LDAPSharedCacheSize 200000
LDAPCacheEntries 1024
LDAPCacheTTL 600
LDAPOpCacheEntries 1024
LDAPOpCacheTTL 600
<Location /ldap-status>
SetHandler ldap-status
Require local
</Location>
</IfDefine>
# vim: ts=4 filetype=apache

85
apache2/modules.d/._cfg0001_00_mod_autoindex.conf Normal file
View File

@@ -0,0 +1,85 @@
<IfModule autoindex_module>
<IfDefine !NO_AUTOINDEX_CONF>
<IfModule alias_module>
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Require all granted
</Directory>
</IfModule>
# Directives controlling the display of server-generated directory listings.
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfDefine>
</IfModule>
# vim: ts=4 filetype=apache

67
apache2/modules.d/._cfg0001_40_mod_ssl.conf Normal file
View File

@@ -0,0 +1,67 @@
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
<IfDefine SSL>
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
## Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
## SSL Global Context:
# All SSL configuration in this context applies both to the main server and
# all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
<IfModule mime_module>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfModule>
## Pass Phrase Dialog:
# Configure the pass phrase gathering process. The filtering dialog program
# (`builtin' is a internal terminal dialog) has to provide the pass phrase on
# stdout.
SSLPassPhraseDialog builtin
## Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism to use and second the
# expiring timeout (in seconds).
#SSLSessionCache dbm:/run/ssl_scache
SSLSessionCache shmcb:/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
## Semaphore:
# Configure the path to the mutual exclusion semaphore the SSL engine uses
# internally for inter-process synchronization.
Mutex file:/run/apache_ssl_mutex ssl-cache
## SSL Compression:
# Known to be vulnerable thus disabled by default (bug #507324).
SSLCompression off
</IfDefine>
# vim: ts=4 filetype=apache

0
apache2/modules.d/.keep_www-servers_apache-2 Normal file
View File

133
apache2/modules.d/00_default_settings.conf Normal file
View File

@@ -0,0 +1,133 @@
# This configuration file reflects default settings for Apache HTTP Server.
# You may change these, but chances are that you may not need to.
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# TraceEnable
# This directive overrides the behavior of TRACE for both the core server and
# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
# which disallows any request body to accompany the request. TraceEnable off
# causes the core server and mod_proxy to return a 405 (Method not allowed)
# error to the client.
# For security reasons this is turned off by default. (bug #240680)
TraceEnable off
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
EnableMMAP On
EnableSendfile On
# FileEtag: Configures the file attributes that are used to create
# the ETag (entity tag) response header field when the document is
# based on a static file. (The ETag value is used in cache management
# to save network bandwidth.)
FileEtag INode MTime Size
# ContentDigest: This directive enables the generation of Content-MD5
# headers as defined in RFC1864 respectively RFC2616.
# The Content-MD5 header provides an end-to-end message integrity
# check (MIC) of the entity-body. A proxy or client may check this
# header for detecting accidental modification of the entity-body
# in transit.
# Note that this can cause performance problems on your server since
# the message digest is computed on every request (the values are
# not cached).
# Content-MD5 is only sent for documents served by the core, and not
# by any module. For example, SSI documents, output from CGI scripts,
# and byte range responses do not have this header.
ContentDigest Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# We configure the "default" to be a very restrictive set of features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Options can be used for the
# same purpose, but it is much slower.
#
# Do not change this entry unless you know what you are doing.
<IfModule dir_module>
DirectoryIndex index.html index.html.var
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# vim: ts=4 filetype=apache

58
apache2/modules.d/00_error_documents.conf Normal file
View File

@@ -0,0 +1,58 @@
# The configuration below implements multi-language error documents through
# content-negotiation.
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Required modules: mod_alias, mod_include, mod_negotiation
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /var/www/localhost/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
<IfDefine ERRORDOCS>
Alias /error/ "/usr/share/apache2/error/"
<Directory "/usr/share/apache2/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfDefine>
# vim: ts=4 filetype=apache

133
apache2/modules.d/00_languages.conf Normal file
View File

@@ -0,0 +1,133 @@
# Settings for hosting different languages.
<IfDefine LANGUAGE>
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# It is generally better to not mark a page as
# being a certain language than marking it with the wrong
# language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
# Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
</IfDefine>
# vim: ts=4 filetype=apache

83
apache2/modules.d/00_mod_autoindex.conf Normal file
View File

@@ -0,0 +1,83 @@
<IfModule autoindex_module>
<IfModule alias_module>
# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# Directives controlling the display of server-generated directory listings.
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# vim: ts=4 filetype=apache

12
apache2/modules.d/00_mod_info.conf Normal file
View File

@@ -0,0 +1,12 @@
<IfDefine INFO>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
</IfDefine>
# vim: ts=4 filetype=apache

35
apache2/modules.d/00_mod_log_config.conf Normal file
View File

@@ -0,0 +1,35 @@
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-Agent}i" agent
LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" vhostio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog /var/log/apache2/access_log common
# If you would like to have agent and referer logfiles,
# uncomment the following directives.
#CustomLog /var/log/apache2/referer_log referer
#CustomLog /var/log/apache2/agent_logs agent
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
</IfModule>
# vim: ts=4 filetype=apache

55
apache2/modules.d/00_mod_mime.conf Normal file
View File

@@ -0,0 +1,55 @@
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /etc/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
<IfModule mime_magic_module>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile /etc/apache2/magic
</IfModule>
# vim: ts=4 filetype=apache

17
apache2/modules.d/00_mod_status.conf Normal file
View File

@@ -0,0 +1,17 @@
<IfDefine STATUS>
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called.
ExtendedStatus On
</IfDefine>
# vim: ts=4 filetype=apache

34
apache2/modules.d/00_mod_userdir.conf Normal file
View File

@@ -0,0 +1,34 @@
# Settings for user home directories
<IfDefine USERDIR>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
# Suexec isn't really required to run cgi-scripts, but it's a really good
# idea if you have multiple users serving websites...
<IfDefine SUEXEC>
<Directory /home/*/public_html/cgi-bin>
Options ExecCGI
SetHandler cgi-script
</Directory>
</IfDefine>
</IfDefine>
# vim: ts=4 filetype=apache

99
apache2/modules.d/00_mpm.conf Normal file
View File

@@ -0,0 +1,99 @@
# Server-Pool Management (MPM specific)
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# DO NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING
PidFile /var/run/apache2.pid
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile /var/run/apache2.lock
# Only one of the below sections will be relevant on your
# installed httpd. Use "/usr/sbin/apache2 -l" to find out the
# active mpm.
# common MPM configuration
# These configuration directives apply to all MPMs
#
# StartServers: Number of child server processes created at startup
# MaxClients: Maximum number of child processes to serve requests
# MaxRequestsPerChild: Limit on the number of requests that an individual child
# server will handle during its life
# prefork MPM
# This is the default MPM if USE=-threads
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 10000
</IfModule>
# worker MPM
# This is the default MPM if USE=threads
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 10000
</IfModule>
# event MPM
#
# MinSpareThreads: Minimum number of idle threads available to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# ThreadsPerChild: Number of threads created by each child process
<IfModule mpm_event_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 10000
</IfModule>
# peruser MPM
#
# MinSpareProcessors: Minimum number of idle child server processes
# MinProcessors: Minimum number of processors per virtual host
# MaxProcessors: Maximum number of processors per virtual host
# ExpireTimeout: Maximum idle time before a child is killed, 0 to disable
# Multiplexer: Specify a Multiplexer child configuration.
# Processor: Specify a user and group for a specific child process
<IfModule mpm_peruser_module>
MinSpareProcessors 2
MinProcessors 2
MaxProcessors 10
MaxClients 150
MaxRequestsPerChild 1000
ExpireTimeout 1800
Multiplexer nobody nobody
Processor apache apache
</IfModule>
# itk MPM
#
# MinSpareServers: Minimum number of idle child server processes
# MaxSpareServers: Maximum number of idle child server processes
<IfModule mpm_itk_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 10000
</IfModule>
# vim: ts=4 filetype=apache

10
apache2/modules.d/10_mod_mem_cache.conf Normal file
View File

@@ -0,0 +1,10 @@
<IfDefine MEM_CACHE>
# 128MB cache for objects < 2MB
CacheEnable mem /
MCacheSize 131072
MCacheMaxObjectCount 1000
MCacheMinObjectSize 1
MCacheMaxObjectSize 2097152
</IfDefine>
# vim: ts=4 filetype=apache

63
apache2/modules.d/40_mod_ssl.conf Normal file
View File

@@ -0,0 +1,63 @@
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
<IfDefine SSL>
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
## Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
## SSL Global Context:
# All SSL configuration in this context applies both to the main server and
# all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
<IfModule mime_module>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfModule>
## Pass Phrase Dialog:
# Configure the pass phrase gathering process. The filtering dialog program
# (`builtin' is a internal terminal dialog) has to provide the pass phrase on
# stdout.
SSLPassPhraseDialog builtin
## Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism to use and second the
# expiring timeout (in seconds).
#SSLSessionCache dbm:/var/run/ssl_scache
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
## Semaphore:
# Configure the path to the mutual exclusion semaphore the SSL engine uses
# internally for inter-process synchronization.
SSLMutex file:/var/run/ssl_mutex
</IfDefine>
# vim: ts=4 filetype=apache

19
apache2/modules.d/45_mod_dav.conf Normal file
View File

@@ -0,0 +1,19 @@
<IfDefine DAV>
DavLockDB "/var/lib/dav/lockdb"
# The following directives disable redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with several clients that do not appropriately handle
# redirects for folders with DAV methods.
<IfModule setenvif_module>
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012345678]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
</IfModule>
</IfDefine>
# vim: ts=4 filetype=apache

20
apache2/modules.d/46_mod_ldap.conf Normal file
View File

@@ -0,0 +1,20 @@
# Examples below are taken from the online documentation
# Refer to:
# http://localhost/manual/mod/mod_ldap.html
# http://localhost/manual/mod/mod_auth_ldap.html
<IfDefine LDAP>
LDAPSharedCacheSize 200000
LDAPCacheEntries 1024
LDAPCacheTTL 600
LDAPOpCacheEntries 1024
LDAPOpCacheTTL 600
<Location /ldap-status>
SetHandler ldap-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
</IfDefine>
# vim: ts=4 filetype=apache

14
apache2/modules.d/70_mod_php5.conf Normal file
View File

@@ -0,0 +1,14 @@
<IfDefine PHP5>
# Load the module first
<IfModule !mod_php5.c>
LoadModule php5_module modules/libphp5.so
</IfModule>
# Set it to handle the files
<IfModule mod_mime.c>
AddHandler application/x-httpd-php .php .php5 .phtml
AddHandler application/x-httpd-php-source .phps
</IfModule>
DirectoryIndex index.php index.phtml
</IfDefine>

160
apache2/modules.d/88_mod_jk.conf Normal file
View File

@@ -0,0 +1,160 @@
<IfDefine JK>
LoadModule jk_module modules/mod_jk.so
###
### Where to find workers.properties
###
# JkWorkersFile specify the location where mod_jk will find
# the workers definitions.
JkWorkersFile /etc/apache2/jk-workers.properties
###
### Where to put mod_jk logs
###
# specify the location where mod_jk is going to place its log file.
JkLogFile /var/log/apache2/mod_jk.log
###
### Set the jk log level [debug/error/info]
###
# info log will contains standard mod_jk activity (default).
# error log will contains also error reports.
# debug log will contains all informations on mod_jk activity
JkLogLevel info
###
### Select the log format
###
# JkLogStampFormat will configure the date/time format found
# on mod_jk logfile. Using the strftime() format string it's
# set by default to "[%a %b %d %H:%M:%S %Y]"
#JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
###
### JkOptions indicate to send SSL KEY SIZE,
###
# The directive JkOptions allow you to set many forwarding
# options which will enable (+) or disable (-) following option.
#
#
# JkOptions ForwardKeySize , you ask mod_jk, when using ajp13, to
# forward also the SSL Key Size as required by Servlet API 2.3.
# This flag shouldn't be set when servlet engine is Tomcat 3.2.x
# (on by default).
#
#
# JkOptions ForwardURICompat , you told mod_jk to send the URI to
# Tomcat normally, which is less spec compliant but mod_rewrite
# compatible, use it for compatibility with Tomcat 3.2.x engines
# (on by default).
#
#
# JkOptions ForwardURICompatUnparsed , the forwarded URI is unparsed,
# it's spec compliant but broke mod_rewrite.
#
#
# JkOptions ForwardURIEscaped , the forwarded URI is escaped and
# Tomcat (since 3.3 rc2) will do the decoding part.
#
#
# JkOptions ForwardDirectories is used in conjunction with Directory-
# Index directive of Apache web server. As such mod_dir should be
# available to Apache, statically or dynamically (DSO)
#
# When DirectoryIndex is configured, Apache will create sub-requests
# for each of the local-url's specified in the directive, to determine
# if there is a local file that matches (this is done by stat-ing the file).
#
# If ForwardDirectories is set to false (default) and Apache doesn't
# find any files that match, Apache will serve the content of the
# directory (if directive Options specifies Indexes for that directory)
# or a 403 Forbidden response (if directive Options doesn't specify
# Indexes for that directory).
#
# If ForwardDirectories is set to true and Apache doesn't find any
# files that match, the request will be forwarded to Tomcat for
# resolution. This is used in cases when Apache cannot see the index
# files on the file system for various reasons: Tomcat is running on
# a different machine, the JSP file has been precompiled etc.
#
# Note that locally visible files will take precedence over the ones
# visible only to Tomcat (i.e. if Apache can see the file, that's
# the one that's going to get served). This is important if there is
# more then one type of file that Tomcat normally serves - for
# instance Velocity pages and JSP pages.
#
JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories
###
### JkEnvVar forward environment vars
###
# The directive JkEnvVar allow you to forward an environment vars
# from Apache server to Tomcat engine.
#
#JkEnvVar SSL_CLIENT_V_START
###
### JkRequestLogFormat set the request format
###
# JkRequestLogFormat will configure the format of mod_jk individual
# request logging. Request logging is configured and enabled on a
# per virtual host basis. To enable request logging for a virtual
# host just add a JkRequestLogFormat config. The syntax of the
# format string is similiar to the Apache LogFormat command, here
# is a list of the available request log format options:
#
# Options Description
# %b Bytes sent, excluding HTTP headers (CLF format)
# %B Bytes sent, excluding HTTP headers
# %H The request protocol
# %m The request method
# %p The canonical Port of the server serving the request
# %q The query string (prepended with a ? if a query string exists, otherwise an empty string)
# %r First line of request
# %s Request HTTP status code
# %T Request duration, elapsed time to handle request in seconds '.' micro seconds
# %U The URL path requested, not including any query string.
# %v The canonical ServerName of the server serving the request
# %V The server name according to the UseCanonicalName setting
# %w Tomcat worker name
#
JkRequestLogFormat "%w %V %T"
###
### JkMount assign specific URLs to Tomcat
###
# JkMount directive assign specific URLs to Tomcat. In general the
# structure of a JkMount directive is:
#
# send all requests ending in .jsp to worker1
# JkMount /*.jsp worker1
#
# send all requests ending /servlet to worker1
# JkMount /*/servlet/ worker1
#
# send all requests jsp requests to files located in /otherworker will go worker2
# JkMount /otherworker/*.jsp worker2
#
#
# You can use the JkMount directive at the top level or inside
# <VirtualHost> sections of your httpd.conf file.
#
# We specify an autoalias, that makes it possible that apache is still
# reponsible for serving static html files. All requests of files with
# the ending .jsp will be redirected to a default Tomcat installation which
# uses the default profile. Change this to fit your needs.
jkAutoAlias /var/lib/tomcat-7-testing/webapps/
jkMount /*.jsp ajp13
</IfDefine>
# vim: ts=4 filetype=apache