saving uncommitted changes in /etc prior to emerge run
Cette révision appartient à :
Hans Wurst
Parent
03672031ca
révision
57fac62b5b
137
._cfg0000_wgetrc
137
._cfg0000_wgetrc
|
|
@ -1,137 +0,0 @@
|
|||
###
|
||||
### Sample Wget initialization file .wgetrc
|
||||
###
|
||||
|
||||
## You can use this file to change the default behaviour of wget or to
|
||||
## avoid having to type many many command-line options. This file does
|
||||
## not contain a comprehensive list of commands -- look at the manual
|
||||
## to find out what you can put into this file. You can find this here:
|
||||
## $ info wget.info 'Startup File'
|
||||
## Or online here:
|
||||
## https://www.gnu.org/software/wget/manual/wget.html#Startup-File
|
||||
##
|
||||
## Wget initialization file can reside in /etc/wgetrc
|
||||
## (global, for all users) or $HOME/.wgetrc (for a single user).
|
||||
##
|
||||
## To use the settings in this file, you will have to uncomment them,
|
||||
## as well as change them, in most cases, as the values on the
|
||||
## commented-out lines are the default values (e.g. "off").
|
||||
##
|
||||
## Command are case-, underscore- and minus-insensitive.
|
||||
## For example ftp_proxy, ftp-proxy and ftpproxy are the same.
|
||||
|
||||
|
||||
##
|
||||
## Global settings (useful for setting up in /etc/wgetrc).
|
||||
## Think well before you change them, since they may reduce wget's
|
||||
## functionality, and make it behave contrary to the documentation:
|
||||
##
|
||||
|
||||
# You can set retrieve quota for beginners by specifying a value
|
||||
# optionally followed by 'K' (kilobytes) or 'M' (megabytes). The
|
||||
# default quota is unlimited.
|
||||
#quota = inf
|
||||
|
||||
# You can lower (or raise) the default number of retries when
|
||||
# downloading a file (default is 20).
|
||||
#tries = 20
|
||||
|
||||
# Lowering the maximum depth of the recursive retrieval is handy to
|
||||
# prevent newbies from going too "deep" when they unwittingly start
|
||||
# the recursive retrieval. The default is 5.
|
||||
#reclevel = 5
|
||||
|
||||
# By default Wget uses "passive FTP" transfer where the client
|
||||
# initiates the data connection to the server rather than the other
|
||||
# way around. That is required on systems behind NAT where the client
|
||||
# computer cannot be easily reached from the Internet. However, some
|
||||
# firewalls software explicitly supports active FTP and in fact has
|
||||
# problems supporting passive transfer. If you are in such
|
||||
# environment, use "passive_ftp = off" to revert to active FTP.
|
||||
#passive_ftp = off
|
||||
|
||||
# The "wait" command below makes Wget wait between every connection.
|
||||
# If, instead, you want Wget to wait only between retries of failed
|
||||
# downloads, set waitretry to maximum number of seconds to wait (Wget
|
||||
# will use "linear backoff", waiting 1 second after the first failure
|
||||
# on a file, 2 seconds after the second failure, etc. up to this max).
|
||||
#waitretry = 10
|
||||
|
||||
|
||||
##
|
||||
## Local settings (for a user to set in his $HOME/.wgetrc). It is
|
||||
## *highly* undesirable to put these settings in the global file, since
|
||||
## they are potentially dangerous to "normal" users.
|
||||
##
|
||||
## Even when setting up your own ~/.wgetrc, you should know what you
|
||||
## are doing before doing so.
|
||||
##
|
||||
|
||||
# Set this to on to use timestamping by default:
|
||||
#timestamping = off
|
||||
|
||||
# It is a good idea to make Wget send your email address in a `From:'
|
||||
# header with your request (so that server administrators can contact
|
||||
# you in case of errors). Wget does *not* send `From:' by default.
|
||||
#header = From: Your Name <username@site.domain>
|
||||
|
||||
# You can set up other headers, like Accept-Language. Accept-Language
|
||||
# is *not* sent by default.
|
||||
#header = Accept-Language: en
|
||||
|
||||
# You can set the default proxies for Wget to use for http, https, and ftp.
|
||||
# They will override the value in the environment.
|
||||
#https_proxy = http://proxy.yoyodyne.com:18023/
|
||||
#http_proxy = http://proxy.yoyodyne.com:18023/
|
||||
#ftp_proxy = http://proxy.yoyodyne.com:18023/
|
||||
|
||||
# If you do not want to use proxy at all, set this to off.
|
||||
#use_proxy = on
|
||||
|
||||
# You can customize the retrieval outlook. Valid options are default,
|
||||
# binary, mega and micro.
|
||||
#dot_style = default
|
||||
|
||||
# Setting this to off makes Wget not download /robots.txt. Be sure to
|
||||
# know *exactly* what /robots.txt is and how it is used before changing
|
||||
# the default!
|
||||
#robots = on
|
||||
|
||||
# It can be useful to make Wget wait between connections. Set this to
|
||||
# the number of seconds you want Wget to wait.
|
||||
#wait = 0
|
||||
|
||||
# You can force creating directory structure, even if a single is being
|
||||
# retrieved, by setting this to on.
|
||||
#dirstruct = off
|
||||
|
||||
# You can turn on recursive retrieving by default (don't do this if
|
||||
# you are not sure you know what it means) by setting this to on.
|
||||
#recursive = off
|
||||
|
||||
# To always back up file X as X.orig before converting its links (due
|
||||
# to -k / --convert-links / convert_links = on having been specified),
|
||||
# set this variable to on:
|
||||
#backup_converted = off
|
||||
|
||||
# To have Wget follow FTP links from HTML files by default, set this
|
||||
# to on:
|
||||
#follow_ftp = off
|
||||
|
||||
# To try ipv6 addresses first:
|
||||
#prefer-family = IPv6
|
||||
|
||||
# Set default IRI support state
|
||||
#iri = off
|
||||
|
||||
# Force the default system encoding
|
||||
#localencoding = UTF-8
|
||||
|
||||
# Force the default remote server encoding
|
||||
#remoteencoding = UTF-8
|
||||
|
||||
# Turn on to prevent following non-HTTPS links when in recursive mode
|
||||
#httpsonly = off
|
||||
|
||||
# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS)
|
||||
#secureprotocol = auto
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
# Bitlbee options (see /usr/sbin/bitlbee -h)
|
||||
BITLBEE_OPTS="-F"
|
||||
|
||||
# By default, the bitlbee init script will attempt to stop
|
||||
# all bitlbee-owned processes, including per-client forks.
|
||||
# Setting this to "no" tells the init script to only
|
||||
# stop the main bitlbee process.
|
||||
BITLBEE_STOP_ALL="yes"
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
# Variables to configure vpn tunnels where "vpnname" is the name of your vpn tunnel:
|
||||
#
|
||||
# server_vpnname
|
||||
# password_vpnname
|
||||
# vpnopts_vpnname
|
||||
#
|
||||
# The tunnel will need to be started with a symbolic link to openconnect:
|
||||
#
|
||||
# ln -s /etc/init.d/openconnect /etc/init.d/openconnect.vpnname
|
||||
#
|
||||
# If you'd like to execute a script on preup, postup, predown and postdown of the vpn tunnel, you
|
||||
# need to create executable scripts in a directory with the same name as
|
||||
# the vpn tunnel (vpn0 can be replaced with the vpn name):
|
||||
#
|
||||
# mkdir /etc/openconnect/vpn0
|
||||
# cd /etc/openconnect/vpn0"
|
||||
# echo '#!/bin/sh' > preup.sh"
|
||||
# cp preup.sh predown.sh"
|
||||
# cp preup.sh postup.sh"
|
||||
# cp preup.sh postdown.sh"
|
||||
# chmod 755 /etc/openconnect/vpn0/*"
|
||||
|
||||
server_vpn0="vpn.server.tld"
|
||||
password_vpn0="YOUR_PASSWORD"
|
||||
# Any OPENCONNECT options my go here (see openconnect --help)
|
||||
vpnopts_vpn0="-l --passwd-on-stdin --user=YOUR_USERNAME --script=/etc/openconnect/openconnect.sh"
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
# /etc/init.d/pydoc.conf
|
||||
# $Id$
|
||||
|
||||
# This file contains the configuration for pydoc's internal webserver.
|
||||
|
||||
# Default port for Python's pydoc server.
|
||||
PYDOC2_7_PORT="7464"
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
# /etc/init.d/pydoc.conf
|
||||
# $Id$
|
||||
|
||||
# This file contains the configuration for pydoc's internal webserver.
|
||||
|
||||
# Default port for Python's pydoc server.
|
||||
PYDOC3_4_PORT="7464"
|
||||
|
|
@ -1,21 +0,0 @@
|
|||
# /etc/conf.d/sshd: config file for /etc/init.d/sshd
|
||||
|
||||
# Where is your sshd_config file stored?
|
||||
|
||||
SSHD_CONFDIR="/etc/ssh"
|
||||
|
||||
|
||||
# Any random options you want to pass to sshd.
|
||||
# See the sshd(8) manpage for more info.
|
||||
|
||||
SSHD_OPTS=""
|
||||
|
||||
|
||||
# Pid file to use (needs to be absolute path).
|
||||
|
||||
#SSHD_PIDFILE="/var/run/sshd.pid"
|
||||
|
||||
|
||||
# Path to the sshd binary (needs to be absolute path).
|
||||
|
||||
#SSHD_BINARY="/usr/sbin/sshd"
|
||||
|
|
@ -1,2 +1,8 @@
|
|||
#Bitlbee options (see /usr/sbin/bitlbee -h)
|
||||
# Bitlbee options (see /usr/sbin/bitlbee -h)
|
||||
BITLBEE_OPTS="-F"
|
||||
|
||||
# By default, the bitlbee init script will attempt to stop
|
||||
# all bitlbee-owned processes, including per-client forks.
|
||||
# Setting this to "no" tells the init script to only
|
||||
# stop the main bitlbee process.
|
||||
BITLBEE_STOP_ALL="yes"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
# /etc/init.d/pydoc.conf
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.3 2011/10/27 13:56:55 neurogeek Exp $
|
||||
# $Id$
|
||||
|
||||
# This file contains the configuration for pydoc's internal webserver.
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
# /etc/init.d/pydoc.conf
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.3 2011/10/27 13:56:55 neurogeek Exp $
|
||||
# $Id$
|
||||
|
||||
# This file contains the configuration for pydoc's internal webserver.
|
||||
|
||||
|
|
|
|||
|
|
@ -1,68 +0,0 @@
|
|||
##
|
||||
## SSL settings
|
||||
##
|
||||
|
||||
# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
|
||||
ssl = yes
|
||||
|
||||
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
|
||||
# dropping root privileges, so keep the key file unreadable by anyone but
|
||||
# root. Included doc/mkcert.sh can be used to easily generate self-signed
|
||||
# certificate, just make sure to update the domains in dovecot-openssl.cnf
|
||||
ssl_cert = </etc/ssl/dovecot/server.pem
|
||||
ssl_key = </etc/ssl/dovecot/server.key
|
||||
|
||||
# If key file is password protected, give the password here. Alternatively
|
||||
# give it when starting dovecot with -p parameter. Since this file is often
|
||||
# world-readable, you may want to place this setting instead to a different
|
||||
# root owned 0600 file by using ssl_key_password = <path.
|
||||
#ssl_key_password =
|
||||
|
||||
# PEM encoded trusted certificate authority. Set this only if you intend to use
|
||||
# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
|
||||
# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
|
||||
#ssl_ca =
|
||||
|
||||
# Require that CRL check succeeds for client certificates.
|
||||
#ssl_require_crl = yes
|
||||
|
||||
# Directory and/or file for trusted SSL CA certificates. These are used only
|
||||
# when Dovecot needs to act as an SSL client (e.g. imapc backend). The
|
||||
# directory is usually /etc/ssl/certs in Debian-based systems and the file is
|
||||
# /etc/pki/tls/cert.pem in RedHat-based systems.
|
||||
#ssl_client_ca_dir =
|
||||
#ssl_client_ca_file =
|
||||
|
||||
# Request client to send a certificate. If you also want to require it, set
|
||||
# auth_ssl_require_client_cert=yes in auth section.
|
||||
#ssl_verify_client_cert = no
|
||||
|
||||
# Which field from certificate to use for username. commonName and
|
||||
# x500UniqueIdentifier are the usual choices. You'll also need to set
|
||||
# auth_ssl_username_from_cert=yes.
|
||||
#ssl_cert_username_field = commonName
|
||||
|
||||
# DH parameters length to use.
|
||||
#ssl_dh_parameters_length = 1024
|
||||
|
||||
# SSL protocols to use
|
||||
#ssl_protocols = !SSLv2
|
||||
|
||||
# SSL ciphers to use
|
||||
# ###############
|
||||
# Added by Gentoo
|
||||
# You are encouraged to change the cipher list to
|
||||
#ssl_cipher_list = DEFAULT:!EXPORT:!LOW:!MEDIUM:!MD5
|
||||
# if you are not required to support legacy mail clients.
|
||||
# ###############
|
||||
#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
|
||||
|
||||
# Prefer the server's order of ciphers over client's.
|
||||
#ssl_prefer_server_ciphers = no
|
||||
|
||||
# SSL crypto device to use, for valid values run "openssl engine"
|
||||
#ssl_crypto_device =
|
||||
|
||||
# SSL extra options. Currently supported options are:
|
||||
# no_compression - Disable compression.
|
||||
#ssl_options =
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
##
|
||||
## LMTP specific settings
|
||||
##
|
||||
|
||||
# Support proxying to other LMTP/SMTP servers by performing passdb lookups.
|
||||
#lmtp_proxy = no
|
||||
|
||||
# When recipient address includes the detail (e.g. user+detail), try to save
|
||||
# the mail to the detail mailbox. See also recipient_delimiter and
|
||||
# lda_mailbox_autocreate settings.
|
||||
#lmtp_save_to_detail_mailbox = no
|
||||
|
||||
# Verify quota before replying to RCPT TO. This adds a small overhead.
|
||||
#lmtp_rcpt_check_quota = no
|
||||
|
||||
# Which recipient address to use for Delivered-To: header and Received:
|
||||
# header. The default is "final", which is the same as the one given to
|
||||
# RCPT TO command. "original" uses the address given in RCPT TO's ORCPT
|
||||
# parameter, "none" uses nothing. Note that "none" is currently always used
|
||||
# when a mail has multiple recipients.
|
||||
#lmtp_hdr_delivery_address = final
|
||||
|
||||
protocol lmtp {
|
||||
# Space separated list of plugins to load (default is global mail_plugins).
|
||||
#mail_plugins = $mail_plugins
|
||||
}
|
||||
|
|
@ -49,19 +49,20 @@ ssl_key = </etc/ssl/dovecot/server.key
|
|||
#ssl_protocols = !SSLv2
|
||||
|
||||
# SSL ciphers to use
|
||||
#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
|
||||
|
||||
# ##########################################
|
||||
# You are strongly encouraged to change the above two settings to
|
||||
#
|
||||
#ssl_protocols = !SSLv2 !SSLv3
|
||||
#ssl_cipher_list = ALL:!EXPORT:!LOW:!MEDIUM:!aNULL:+RC4:@STRENGTH
|
||||
#
|
||||
# ###############
|
||||
# Added by Gentoo
|
||||
# You are encouraged to change the cipher list to
|
||||
#ssl_cipher_list = DEFAULT:!EXPORT:!LOW:!MEDIUM:!MD5
|
||||
# if you are not required to support legacy mail clients.
|
||||
# ##########################################
|
||||
# ###############
|
||||
#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
|
||||
|
||||
# Prefer the server's order of ciphers over client's.
|
||||
#ssl_prefer_server_ciphers = no
|
||||
|
||||
# SSL crypto device to use, for valid values run "openssl engine"
|
||||
#ssl_crypto_device =
|
||||
|
||||
# SSL extra options. Currently supported options are:
|
||||
# no_compression - Disable compression.
|
||||
#ssl_options =
|
||||
|
|
|
|||
|
|
@ -13,8 +13,14 @@
|
|||
# Verify quota before replying to RCPT TO. This adds a small overhead.
|
||||
#lmtp_rcpt_check_quota = no
|
||||
|
||||
# Which recipient address to use for Delivered-To: header and Received:
|
||||
# header. The default is "final", which is the same as the one given to
|
||||
# RCPT TO command. "original" uses the address given in RCPT TO's ORCPT
|
||||
# parameter, "none" uses nothing. Note that "none" is currently always used
|
||||
# when a mail has multiple recipients.
|
||||
#lmtp_hdr_delivery_address = final
|
||||
|
||||
protocol lmtp {
|
||||
# Space separated list of plugins to load (default is global mail_plugins).
|
||||
#mail_plugins = $mail_plugins
|
||||
}
|
||||
|
||||
|
|
@ -1,116 +0,0 @@
|
|||
# Hiawatha main configuration file
|
||||
#
|
||||
|
||||
# VARIABLES
|
||||
# With 'set', you can declare a variable. Make sure the name of the
|
||||
# variable doesn't conflict with any of the configuration options. The
|
||||
# variables are case-sensitive and cannot be redeclared.
|
||||
#
|
||||
#set LOCALHOST = 127.0.0.0/8
|
||||
|
||||
|
||||
# GENERAL SETTINGS
|
||||
#
|
||||
ServerId = hiawatha
|
||||
ConnectionsTotal = 1000
|
||||
ConnectionsPerIP = 25
|
||||
SystemLogfile = /var/log/hiawatha/system.log
|
||||
GarbageLogfile = /var/log/hiawatha/garbage.log
|
||||
|
||||
|
||||
# BINDING SETTINGS
|
||||
# A binding is where a client can connect to.
|
||||
#
|
||||
Binding {
|
||||
Port = 80
|
||||
# Interface = 127.0.0.1
|
||||
# MaxKeepAlive = 30
|
||||
# TimeForRequest = 3,20
|
||||
}
|
||||
#
|
||||
#Binding {
|
||||
# Port = 443
|
||||
# Interface = ::1
|
||||
# MaxKeepAlive = 30
|
||||
# TimeForRequest = 3,20
|
||||
# TLScertFile = hiawatha.pem
|
||||
#}
|
||||
|
||||
|
||||
# BANNING SETTINGS
|
||||
# Deny service to clients who misbehave.
|
||||
#
|
||||
#BanOnGarbage = 300
|
||||
#BanOnMaxPerIP = 60
|
||||
#BanOnMaxReqSize = 300
|
||||
#KickOnBan = yes
|
||||
#RebanDuringBan = yes
|
||||
|
||||
|
||||
# COMMON GATEWAY INTERFACE (CGI) SETTINGS
|
||||
# These settings can be used to run CGI applications.
|
||||
#
|
||||
#CGIhandler = /usr/bin/perl:pl
|
||||
#CGIhandler = /usr/bin/php-cgi:php
|
||||
#CGIhandler = /usr/bin/python:py
|
||||
#CGIhandler = /usr/bin/ruby:rb
|
||||
#CGIhandler = /usr/bin/ssi-cgi:shtml
|
||||
#CGIextension = cgi
|
||||
#
|
||||
#FastCGIserver {
|
||||
# FastCGIid = PHP5
|
||||
# ConnectTo = 127.0.0.1:2005
|
||||
# Extension = php
|
||||
#}
|
||||
|
||||
|
||||
# URL TOOLKIT
|
||||
# This URL toolkit rule was made for the Banshee PHP framework, which
|
||||
# can be downloaded from http://www.hiawatha-webserver.org/banshee
|
||||
#
|
||||
#UrlToolkit {
|
||||
# ToolkitID = banshee
|
||||
# RequestURI isfile Return
|
||||
# Match ^/(css|files|images|js|slimstat)($|/) Return
|
||||
# Match ^/(favicon.ico|robots.txt|sitemap.xml)$ Return
|
||||
# Match .*\?(.*) Rewrite /index.php?$1
|
||||
# Match .* Rewrite /index.php
|
||||
#}
|
||||
|
||||
|
||||
# DEFAULT WEBSITE
|
||||
# It is wise to use your IP address as the hostname of the default website
|
||||
# and give it a blank webpage. By doing so, automated webscanners won't find
|
||||
# your possible vulnerable website.
|
||||
#
|
||||
Hostname = 127.0.0.1
|
||||
WebsiteRoot = /var/www/hiawatha
|
||||
StartFile = index.html
|
||||
AccessLogfile = /var/log/hiawatha/access.log
|
||||
ErrorLogfile = /var/log/hiawatha/error.log
|
||||
#ErrorHandler = 404:/error.cgi
|
||||
|
||||
|
||||
# VIRTUAL HOSTS
|
||||
# Use a VirtualHost section to declare the websites you want to host.
|
||||
#
|
||||
#VirtualHost {
|
||||
# Hostname = www.my-domain.com
|
||||
# WebsiteRoot = /var/www/my-domain/public
|
||||
# StartFile = index.php
|
||||
# AccessLogfile = /var/www/my-domain/log/access.log
|
||||
# ErrorLogfile = /var/www/my-domain/log/error.log
|
||||
# TimeForCGI = 5
|
||||
# UseFastCGI = PHP5
|
||||
# UseToolkit = banshee
|
||||
#}
|
||||
|
||||
|
||||
# DIRECTORY SETTINGS
|
||||
# You can specify some settings per directory.
|
||||
#
|
||||
#Directory {
|
||||
# Path = /home/baduser
|
||||
# ExecuteCGI = no
|
||||
# UploadSpeed = 10,2
|
||||
#}
|
||||
|
|
@ -1,11 +1,18 @@
|
|||
# Hiawatha main configuration file
|
||||
#
|
||||
|
||||
# VARIABLES
|
||||
# With 'set', you can declare a variable. Make sure the name of the
|
||||
# variable doesn't conflict with any of the configuration options. The
|
||||
# variables are case-sensitive and cannot be redeclared.
|
||||
#
|
||||
#set LOCALHOST = 127.0.0.0/8
|
||||
|
||||
|
||||
# GENERAL SETTINGS
|
||||
#
|
||||
ServerId = hiawatha
|
||||
ConnectionsTotal = 250
|
||||
ConnectionsTotal = 1000
|
||||
ConnectionsPerIP = 25
|
||||
SystemLogfile = /var/log/hiawatha/system.log
|
||||
GarbageLogfile = /var/log/hiawatha/garbage.log
|
||||
|
|
@ -26,7 +33,7 @@ Binding {
|
|||
# Interface = ::1
|
||||
# MaxKeepAlive = 30
|
||||
# TimeForRequest = 3,20
|
||||
# SSLcertFile = hiawatha.pem
|
||||
# TLScertFile = hiawatha.pem
|
||||
#}
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,58 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2012 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License, v2 or later
|
||||
# $Id$
|
||||
|
||||
extra_started_commands="reload"
|
||||
|
||||
depend() {
|
||||
need localmount
|
||||
before postfix
|
||||
after bootmisc ldap mysql ntp-client ntpd postgresql saslauthd slapd
|
||||
use logger net
|
||||
}
|
||||
|
||||
checkconfig() {
|
||||
DOVECOT_INSTANCE=${SVCNAME##*.}
|
||||
if [ -n "${DOVECOT_INSTANCE}" -a "${SVCNAME}" != "dovecot" ]; then
|
||||
DOVECOT_CONF=/etc/dovecot/dovecot.${DOVECOT_INSTANCE}.conf
|
||||
else
|
||||
DOVECOT_CONF=/etc/dovecot/dovecot.conf
|
||||
fi
|
||||
if [ ! -e ${DOVECOT_CONF} ]; then
|
||||
eerror "You will need an ${DOVECOT_CONF} first"
|
||||
return 1
|
||||
fi
|
||||
if [ -x /usr/sbin/dovecot ]; then
|
||||
DOVECOT_BASEDIR=$(/usr/sbin/dovecot -c ${DOVECOT_CONF} -a | grep '^base_dir = ' | sed 's/^base_dir = //')
|
||||
else
|
||||
eerror "dovecot not executable"
|
||||
return 1
|
||||
fi
|
||||
DOVECOT_BASEDIR=${DOVECOT_BASEDIR:-/var/run/dovecot}
|
||||
DOVECOT_PIDFILE=${DOVECOT_BASEDIR}/master.pid
|
||||
}
|
||||
|
||||
start() {
|
||||
checkconfig || return 1
|
||||
ebegin "Starting ${SVCNAME}"
|
||||
start-stop-daemon --start --exec /usr/sbin/dovecot \
|
||||
--pidfile "${DOVECOT_PIDFILE}" -- -c "${DOVECOT_CONF}"
|
||||
eend $?
|
||||
}
|
||||
|
||||
stop() {
|
||||
checkconfig || return 1
|
||||
ebegin "Stopping ${SVCNAME}"
|
||||
start-stop-daemon --stop --exec /usr/sbin/dovecot \
|
||||
--pidfile "${DOVECOT_PIDFILE}"
|
||||
eend $?
|
||||
}
|
||||
|
||||
reload() {
|
||||
checkconfig || return 1
|
||||
ebegin "Reloading ${SVCNAME} configs and restarting auth/login processes"
|
||||
start-stop-daemon --signal HUP --exec /usr/sbin/dovecot \
|
||||
--pidfile "${DOVECOT_PIDFILE}"
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
depend() {
|
||||
need net
|
||||
}
|
||||
|
||||
start() {
|
||||
ebegin "Starting ${SVCNAME}"
|
||||
start-stop-daemon \
|
||||
--start \
|
||||
--exec "/usr/sbin/hiawatha" \
|
||||
--pidfile "/var/run/hiawatha.pid"
|
||||
eend $?
|
||||
}
|
||||
|
||||
stop() {
|
||||
ebegin "Stopping ${SVCNAME}"
|
||||
start-stop-daemon \
|
||||
--stop \
|
||||
--exec "/usr/sbin/hiawatha" \
|
||||
--pidfile "/var/run/hiawatha.pid"
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,97 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
extra_commands="reload"
|
||||
|
||||
depend() {
|
||||
need net
|
||||
use mysql postgresql slapd
|
||||
provide jabber-server
|
||||
}
|
||||
|
||||
stopJabberServices() {
|
||||
|
||||
eindent
|
||||
for pidfile in /var/run/jabber/*.pid; do
|
||||
if [ -f "${pidfile}" ]; then
|
||||
service=$(basename ${pidfile} .pid)
|
||||
ebegin "Stopping ${service}"
|
||||
start-stop-daemon \
|
||||
--stop \
|
||||
--pidfile ${pidfile}
|
||||
eend $?
|
||||
fi
|
||||
done
|
||||
eoutdent
|
||||
|
||||
}
|
||||
|
||||
start_pre() {
|
||||
checkpath -d -o jabber /var/run/jabber
|
||||
}
|
||||
|
||||
start() {
|
||||
|
||||
einfo "Starting Jabber Server ..."
|
||||
local services executable cfgfile pidfile
|
||||
services=$(grep -v ^# /etc/jabber/jabberd.cfg | grep '..*' | awk '{print $1 ":" $2}')
|
||||
eindent
|
||||
for service in ${services}; do
|
||||
|
||||
cfgfile=$(echo ${service} | cut -d ':' -f 2)
|
||||
service=$(echo ${service} | cut -d ':' -f 1)
|
||||
if [ ! -f "${cfgfile}" ]; then
|
||||
if [ -f "/etc/jabber/${service}.xml" ]; then
|
||||
cfgfile="/etc/jabber/${service}.xml"
|
||||
else
|
||||
eerror "Can't find: ${cfgfile} or default /etc/jabber/${service}.xml"
|
||||
stopJabberServices
|
||||
return 1
|
||||
fi
|
||||
fi
|
||||
|
||||
executable=/usr/bin/${service}
|
||||
|
||||
if [ ! -f "${executable}" ]; then
|
||||
eerror "Can't find executable: ${executable}"
|
||||
stopJabberServices
|
||||
return 1
|
||||
fi
|
||||
|
||||
ebegin "Starting ${service} (${cfgfile})"
|
||||
pidfile="$(grep -v ^# ${cfgfile} | grep '<pidfile>' | sed 's#<.\?pidfile>##g')"
|
||||
start-stop-daemon \
|
||||
--background \
|
||||
--start \
|
||||
--user jabber:jabber \
|
||||
--exec /usr/bin/${service} \
|
||||
--pid ${pidfile} \
|
||||
-- -c ${cfgfile}
|
||||
eend $?
|
||||
|
||||
done
|
||||
eoutdent
|
||||
|
||||
}
|
||||
|
||||
reload() {
|
||||
eindent
|
||||
for pidfile in /var/run/jabber/*.pid; do
|
||||
if [ -f "${pidfile}" ]; then
|
||||
service=$(basename ${pidfile} .pid)
|
||||
ebegin "Reloading ${service}"
|
||||
kill -HUP $(cat ${pidfile})
|
||||
eend $?
|
||||
fi
|
||||
done
|
||||
eoutdent
|
||||
}
|
||||
|
||||
stop() {
|
||||
|
||||
einfo "Stopping Jabber Server"
|
||||
stopJabberServices
|
||||
|
||||
}
|
||||
|
|
@ -1,80 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2004 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
depend() {
|
||||
before bootmisc hdparm
|
||||
after localmount
|
||||
}
|
||||
|
||||
checkconfig() {
|
||||
if [ ! -f /etc/conf.d/pciparm ]; then
|
||||
ewarn "/etc/conf.d/pciparm does not exist, skipping"
|
||||
return 1
|
||||
fi
|
||||
|
||||
if [ -z "${PCIPARM_ALL}" -a -z "${PCIPARM_BUS_0}" -a -z "${PCIPARM_VENDOR_0}" ]; then
|
||||
ewarn "None of PCIPARM_ALL, PCIPARM_BUS_* or PCIPARM_VENDOR_* set in /etc/conf.d/pciparm"
|
||||
return 1
|
||||
fi
|
||||
}
|
||||
|
||||
do_setpci() {
|
||||
#ewarn "do_setpci: /usr/sbin/setpci $SETPCI_OPT $@"
|
||||
SWITCH=$1
|
||||
SPEC_ID=$2
|
||||
shift 2
|
||||
case "$SWITCH" in
|
||||
-d) DESC=vendor ;;
|
||||
-s) DESC=bus ;;
|
||||
*) eerror "Unknown setpci type: $SWITCH" ; return 1 ;;
|
||||
esac
|
||||
|
||||
if [ -z "$SPEC_ID" ]; then
|
||||
eerror "Missing device specifier!"
|
||||
return 1
|
||||
fi
|
||||
if [ -z "$*" ]; then
|
||||
eerror "Missing configuration to set for ($DESC) $SPEC_ID!"
|
||||
return 1
|
||||
fi
|
||||
|
||||
ebegin "Setting PCI params for ($DESC) $SPEC_ID to $@"
|
||||
/usr/sbin/setpci $SETPCI_OPT $SWITCH $SPEC_ID "$@"
|
||||
rc=$?
|
||||
eend $rc
|
||||
return $rc
|
||||
}
|
||||
|
||||
do_setpci_array() {
|
||||
name=$1
|
||||
shift
|
||||
i=0
|
||||
while true; do
|
||||
eval opt="\$${name}_$i"
|
||||
# End of loop
|
||||
[ -z "${opt}" ] && break
|
||||
# Pass in all other parameters here, in case we want to use multiple
|
||||
# arguments later.
|
||||
do_setpci "$@" $opt #|| return 1
|
||||
i=$(($i+1))
|
||||
done
|
||||
}
|
||||
|
||||
start() {
|
||||
if get_bootparam "nopciparm" ; then
|
||||
ewarn "Skipping pciparm init as requested in kernel cmdline"
|
||||
return 0
|
||||
fi
|
||||
|
||||
checkconfig || return 1
|
||||
|
||||
# We do not exit after any errors presently, because it might be a
|
||||
# stability-related fix after a failure.
|
||||
[ -n "$PCIPARM_ALL" ] && \
|
||||
do_setpci -d '*:*' $PCIPARM_ALL #|| return 1
|
||||
|
||||
do_setpci_array PCIPARM_BUS -s #|| return 1
|
||||
do_setpci_array PCIPARM_VENDOR -d #|| return 1
|
||||
}
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Technologies, Inc.
|
||||
# Distributed under the terms of the GNU General Public Licence v2
|
||||
# $Id$
|
||||
|
||||
start() {
|
||||
local pydoc_port="${PYDOC2_7_PORT-${PYDOC_PORT}}"
|
||||
|
||||
if [ -z "${pydoc_port}" ]; then
|
||||
eerror "Port not set"
|
||||
return 1
|
||||
fi
|
||||
|
||||
ebegin "Starting pydoc server on port ${pydoc_port}"
|
||||
start-stop-daemon --start --background --make-pidfile \
|
||||
--pidfile /var/run/pydoc2.7.pid \
|
||||
--exec /usr/bin/pydoc2.7 -- -p "${pydoc_port}"
|
||||
eend $?
|
||||
}
|
||||
|
||||
stop() {
|
||||
ebegin "Stopping pydoc server"
|
||||
start-stop-daemon --stop --quiet --pidfile /var/run/pydoc2.7.pid
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Technologies, Inc.
|
||||
# Distributed under the terms of the GNU General Public Licence v2
|
||||
# $Id$
|
||||
|
||||
start() {
|
||||
local pydoc_port="${PYDOC3_4_PORT-${PYDOC_PORT}}"
|
||||
|
||||
if [ -z "${pydoc_port}" ]; then
|
||||
eerror "Port not set"
|
||||
return 1
|
||||
fi
|
||||
|
||||
ebegin "Starting pydoc server on port ${pydoc_port}"
|
||||
start-stop-daemon --start --background --make-pidfile \
|
||||
--pidfile /var/run/pydoc3.4.pid \
|
||||
--exec /usr/bin/pydoc3.4 -- -p "${pydoc_port}"
|
||||
eend $?
|
||||
}
|
||||
|
||||
stop() {
|
||||
ebegin "Stopping pydoc server"
|
||||
start-stop-daemon --stop --quiet --pidfile /var/run/pydoc3.4.pid
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,139 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
# enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390 program execution by the kernel
|
||||
|
||||
# Defaulting to OC should be safe because it comes down to:
|
||||
# - do we trust the interp itself to not be malicious? yes; we built it.
|
||||
# - do we trust the programs we're running? ish; same permission as native
|
||||
# binaries apply. so if user can do bad stuff natively, cross isn't worse.
|
||||
: ${QEMU_BINFMT_FLAGS:=OC}
|
||||
|
||||
depend() {
|
||||
after procfs
|
||||
}
|
||||
|
||||
start() {
|
||||
ebegin "Registering qemu-user binaries (flags: ${QEMU_BINFMT_FLAGS})"
|
||||
|
||||
if [ ! -d /proc/sys/fs/binfmt_misc ] ; then
|
||||
modprobe -q binfmt_misc
|
||||
fi
|
||||
|
||||
if [ ! -d /proc/sys/fs/binfmt_misc ] ; then
|
||||
eend $? "You need support for 'misc binaries' in your kernel!" || return
|
||||
fi
|
||||
|
||||
if [ ! -f /proc/sys/fs/binfmt_misc/register ] ; then
|
||||
mount -t binfmt_misc binfmt_misc /proc/sys/fs/binfmt_misc >/dev/null 2>&1
|
||||
eend $? || return
|
||||
fi
|
||||
|
||||
# probe cpu type
|
||||
cpu=`uname -m`
|
||||
case "$cpu" in
|
||||
i386|i486|i586|i686|i86pc|BePC|x86_64)
|
||||
cpu="i386"
|
||||
;;
|
||||
m68k)
|
||||
cpu="m68k"
|
||||
;;
|
||||
mips*)
|
||||
cpu="mips"
|
||||
;;
|
||||
"Power Macintosh"|ppc|ppc64)
|
||||
cpu="ppc"
|
||||
;;
|
||||
armv[4-9]*)
|
||||
cpu="arm"
|
||||
;;
|
||||
sparc*)
|
||||
cpu="sparc"
|
||||
;;
|
||||
esac
|
||||
|
||||
# register the interpreter for each cpu except for the native one
|
||||
if [ $cpu != "i386" -a -x "/usr/bin/qemu-i386" ] ; then
|
||||
echo ':i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-i386:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
echo ':i486:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-i386:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "alpha" -a -x "/usr/bin/qemu-alpha" ] ; then
|
||||
echo ':alpha:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x26\x90:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-alpha:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "arm" -a -x "/usr/bin/qemu-arm" ] ; then
|
||||
echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\x00\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "arm" -a -x "/usr/bin/qemu-armeb" ] ; then
|
||||
echo ':armeb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-armeb:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "aarch64" -a -x "/usr/bin/qemu-aarch64" ] ; then
|
||||
echo ':aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-aarch64:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "sparc" -a -x "/usr/bin/qemu-sparc" ] ; then
|
||||
echo ':sparc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-sparc:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "ppc" -a -x "/usr/bin/qemu-ppc" ] ; then
|
||||
echo ':ppc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-ppc:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "m68k" -a -x "/usr/bin/qemu-m68k" ] ; then
|
||||
#echo 'Please check cpu value and header information for m68k!'
|
||||
echo ':m68k:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x04\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-m68k:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mips" ] ; then
|
||||
# FIXME: We could use the other endianness on a MIPS host.
|
||||
echo ':mips:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-mips:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mipsel" ] ; then
|
||||
echo ':mipsel:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-mipsel:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mipsn32" ] ; then
|
||||
echo ':mipsn32:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-mipsn32:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mipsn32el" ] ; then
|
||||
echo ':mipsn32el:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-mipsn32el:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mips64" ] ; then
|
||||
echo ':mips64:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-mips64:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "mips" -a -x "/usr/bin/qemu-mips64el" ] ; then
|
||||
echo ':mips64el:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-mips64el:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "sh" -a -x "/usr/bin/qemu-sh4" ] ; then
|
||||
echo ':sh4:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-sh4:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "sh" -a -x "/usr/bin/qemu-sh4eb" ] ; then
|
||||
echo ':sh4eb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-sh4eb:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
if [ $cpu != "s390x" -a -x "/usr/bin/qemu-s390x" ] ; then
|
||||
echo ':s390x:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x16:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-s390x:'"${QEMU_BINFMT_FLAGS}" > /proc/sys/fs/binfmt_misc/register
|
||||
fi
|
||||
eend $?
|
||||
}
|
||||
|
||||
stop() {
|
||||
ebegin "Unregistering qemu-user binaries"
|
||||
local arches
|
||||
|
||||
arches="${arches} i386 i486"
|
||||
arches="${arches} alpha"
|
||||
arches="${arches} arm armeb"
|
||||
arches="${arches} aarch64"
|
||||
arches="${arches} sparc"
|
||||
arches="${arches} ppc"
|
||||
arches="${arches} m68k"
|
||||
arches="${arches} mips mipsel mipsn32 mipsn32el mips64 mips64el"
|
||||
arches="${arches} sh4 sh4eb"
|
||||
arches="${arches} s390x"
|
||||
|
||||
for a in ${arches}; do
|
||||
if [ -f /proc/sys/fs/binfmt_misc/$a ] ; then
|
||||
echo '-1' > /proc/sys/fs/binfmt_misc/$a
|
||||
fi
|
||||
done
|
||||
|
||||
eend $?
|
||||
}
|
||||
|
||||
# vim: ts=4 :
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2013 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
# NB: Config is in /etc/conf.d/spamd
|
||||
|
||||
# Provide a default location if they haven't in /etc/conf.d/spamd
|
||||
PIDFILE=${PIDFILE:-/run/spamd.pid}
|
||||
|
||||
extra_started_commands="reload"
|
||||
|
||||
depend() {
|
||||
need net
|
||||
before mta
|
||||
use logger
|
||||
}
|
||||
|
||||
start() {
|
||||
ebegin "Starting spamd"
|
||||
start-stop-daemon --start --quiet \
|
||||
--name spamd \
|
||||
--nicelevel ${SPAMD_NICELEVEL:-0} \
|
||||
--pidfile ${PIDFILE} \
|
||||
--exec /usr/sbin/spamd -- -d -r ${PIDFILE} \
|
||||
${SPAMD_OPTS}
|
||||
retval=$?
|
||||
if ! [ -f "${PIDFILE}" ]; then
|
||||
sleep 1
|
||||
fi
|
||||
eend ${retval} "Failed to start spamd"
|
||||
}
|
||||
|
||||
stop() {
|
||||
ebegin "Stopping spamd"
|
||||
start-stop-daemon --stop --quiet --pidfile ${PIDFILE}
|
||||
eend $? "Failed to stop spamd"
|
||||
}
|
||||
|
||||
reload() {
|
||||
ebegin "Reloading configuration"
|
||||
start-stop-daemon --signal HUP --quiet --pidfile ${PIDFILE}
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,21 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2015 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License, v2 or later
|
||||
# $Id$
|
||||
|
||||
description="svn server"
|
||||
pidfile="/var/run/svnserve.pid"
|
||||
command="/usr/bin/svnserve"
|
||||
command_args="--foreground --daemon ${SVNSERVE_OPTS:---root=/var/svn}"
|
||||
command_background="true"
|
||||
start_stop_daemon_args="-u ${SVNSERVE_USER:-svn} -g ${SVNSERVE_GROUP:-svnusers}"
|
||||
|
||||
depend() {
|
||||
need net
|
||||
}
|
||||
|
||||
start_pre() {
|
||||
# Ensure that we run from a readable working dir, and that we do not
|
||||
# lock filesystems when being run from such a location.
|
||||
cd /
|
||||
}
|
||||
|
|
@ -1,59 +0,0 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2015 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Id$
|
||||
|
||||
SYSLOG_NG_CONFIGFILE=${SYSLOG_NG_CONFIGFILE:-/etc/syslog-ng/${RC_SVCNAME}.conf}
|
||||
SYSLOG_NG_STATEFILE_DIR=${SYSLOG_NG_STATEFILE_DIR:-/var/lib/syslog-ng}
|
||||
SYSLOG_NG_STATEFILE=${SYSLOG_NG_STATEFILE:-${SYSLOG_NG_STATEFILE_DIR}/syslog-ng.persist}
|
||||
SYSLOG_NG_PIDFILE_DIR=${SYSLOG_NG_PIDFILE_DIR:-/run}
|
||||
SYSLOG_NG_PIDFILE=${SYSLOG_NG_PIDFILE:-${SYSLOG_NG_PIDFILE_DIR}/${RC_SVCNAME}.pid}
|
||||
|
||||
SYSLOG_NG_GROUP=${SYSLOG_NG_GROUP:-root}
|
||||
SYSLOG_NG_USER=${SYSLOG_NG_USER:-root}
|
||||
|
||||
command="/usr/sbin/syslog-ng"
|
||||
command_args="--persist-file \"${SYSLOG_NG_STATEFILE}\" --cfgfile \"${SYSLOG_NG_CONFIGFILE}\" --pidfile \"${SYSLOG_NG_PIDFILE}\" ${SYSLOG_NG_OPTS}"
|
||||
extra_commands="checkconfig"
|
||||
extra_started_commands="reload"
|
||||
pidfile="${SYSLOG_NG_PIDFILE}"
|
||||
start_stop_daemon_args="--user \"${SYSLOG_NG_USER}\":\"${SYSLOG_NG_GROUP}\""
|
||||
description="Syslog-ng is a syslog replacement with advanced filtering features."
|
||||
description_checkconfig="Check the configuration file that will be used by \"start\""
|
||||
description_reload="Reload the configuration without exiting"
|
||||
required_files="${SYSLOG_NG_CONFIGFILE}"
|
||||
required_dirs="${SYSLOG_NG_PIDFILE_DIR}"
|
||||
|
||||
depend() {
|
||||
use clock
|
||||
need hostname localmount
|
||||
after bootmisc
|
||||
provide logger
|
||||
}
|
||||
|
||||
checkconfig() {
|
||||
ebegin "Checking your configfile (${SYSLOG_NG_CONFIGFILE})"
|
||||
syslog-ng -s -f "${SYSLOG_NG_CONFIGFILE}"
|
||||
eend $? "Configuration error. Please fix your configfile (${SYSLOG_NG_CONFIGFILE})"
|
||||
}
|
||||
|
||||
start_pre() {
|
||||
checkconfig || return 1
|
||||
checkpath \
|
||||
-d \
|
||||
--mode 0700 \
|
||||
--owner "${SYSLOG_NG_USER}:${SYSLOG_NG_GROUP}" \
|
||||
"${SYSLOG_NG_STATEFILE_DIR}"
|
||||
}
|
||||
|
||||
stop_pre() {
|
||||
[ "$RC_CMD" = restart ] && sleep 1
|
||||
return 0
|
||||
}
|
||||
|
||||
reload() {
|
||||
checkconfig || return 1
|
||||
ebegin "Reloading configuration and re-opening log files"
|
||||
start-stop-daemon --signal HUP --pidfile "${pidfile}"
|
||||
eend $?
|
||||
}
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2012 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License, v2 or later
|
||||
# $Header: /var/cvsroot/gentoo-x86/net-mail/dovecot/files/dovecot.init-r4,v 1.1 2012/12/01 10:40:49 eras Exp $
|
||||
# $Id$
|
||||
|
||||
extra_started_commands="reload"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2013 Gentoo Foundation
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: $
|
||||
# $Id$
|
||||
|
||||
depend() {
|
||||
need net
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/net-im/jabberd2/files/jabberd2-2.3.2.init,v 1.1 2014/06/01 20:09:54 hasufell Exp $
|
||||
# $Id$
|
||||
|
||||
extra_commands="reload"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2004 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/sys-apps/pciutils/files/init.d-pciparm,v 1.3 2008/10/11 02:47:50 robbat2 Exp $
|
||||
# $Id$
|
||||
|
||||
depend() {
|
||||
before bootmisc hdparm
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Technologies, Inc.
|
||||
# Distributed under the terms of the GNU General Public Licence v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $
|
||||
# $Id$
|
||||
|
||||
start() {
|
||||
local pydoc_port="${PYDOC2_7_PORT-${PYDOC_PORT}}"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Technologies, Inc.
|
||||
# Distributed under the terms of the GNU General Public Licence v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $
|
||||
# $Id$
|
||||
|
||||
start() {
|
||||
local pydoc_port="${PYDOC3_4_PORT-${PYDOC_PORT}}"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2014 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/app-emulation/qemu/files/qemu-binfmt.initd-r1,v 1.5 2014/08/04 06:47:22 vapier Exp $
|
||||
# $Id$
|
||||
|
||||
# enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390 program execution by the kernel
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2013 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/mail-filter/spamassassin/files/3.3.1-spamd.init,v 1.6 2013/10/17 11:44:12 zlogene Exp $
|
||||
# $Id$
|
||||
|
||||
# NB: Config is in /etc/conf.d/spamd
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2015 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License, v2 or later
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-vcs/subversion/files/svnserve.initd3,v 1.1 2015/04/09 12:58:45 polynomial-c Exp $
|
||||
# $Id$
|
||||
|
||||
description="svn server"
|
||||
pidfile="/var/run/svnserve.pid"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/sbin/runscript
|
||||
# Copyright 1999-2015 Gentoo Foundation
|
||||
# Distributed under the terms of the GNU General Public License v2
|
||||
# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/3.6/syslog-ng.rc6,v 1.3 2015/03/29 07:27:06 mr_bones_ Exp $
|
||||
# $Id$
|
||||
|
||||
SYSLOG_NG_CONFIGFILE=${SYSLOG_NG_CONFIGFILE:-/etc/syslog-ng/${RC_SVCNAME}.conf}
|
||||
SYSLOG_NG_STATEFILE_DIR=${SYSLOG_NG_STATEFILE_DIR:-/var/lib/syslog-ng}
|
||||
|
|
|
|||
|
|
@ -1,13 +0,0 @@
|
|||
# $Id$
|
||||
#
|
||||
# Syslog-ng logrotate snippet for Gentoo Linux
|
||||
# contributed by Michael Sterrett
|
||||
#
|
||||
|
||||
/var/log/messages {
|
||||
missingok
|
||||
sharedscripts
|
||||
postrotate
|
||||
/etc/init.d/syslog-ng reload > /dev/null 2>&1 || true
|
||||
endscript
|
||||
}
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.logrotate.in,v 1.1 2014/01/22 04:25:35 mr_bones_ Exp $
|
||||
# $Id$
|
||||
#
|
||||
# Syslog-ng logrotate snippet for Gentoo Linux
|
||||
# contributed by Michael Sterrett
|
||||
|
|
|
|||
|
|
@ -1,36 +0,0 @@
|
|||
# This is the right place to customize your installation of SpamAssassin.
|
||||
#
|
||||
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
|
||||
# tweaked.
|
||||
#
|
||||
# This file contains plugin activation commands for plugins included
|
||||
# in SpamAssassin 3.0.x releases. It will not be installed if you
|
||||
# already have a file in place called "init.pre".
|
||||
#
|
||||
# There are now multiple files read to enable plugins in the
|
||||
# /etc/mail/spamassassin directory; previously only one, "init.pre" was
|
||||
# read. Now both "init.pre", "v310.pre", and any other files ending in
|
||||
# ".pre" will be read. As future releases are made, new plugins will be
|
||||
# added to new files, named according to the release they're added in.
|
||||
###########################################################################
|
||||
|
||||
# RelayCountry - add metadata for Bayes learning, marking the countries
|
||||
# a message was relayed through
|
||||
#
|
||||
# Note: This requires the Geo::IP Perl module
|
||||
#
|
||||
# loadplugin Mail::SpamAssassin::Plugin::RelayCountry
|
||||
|
||||
# URIDNSBL - look up URLs found in the message against several DNS
|
||||
# blocklists.
|
||||
#
|
||||
#loadplugin Mail::SpamAssassin::Plugin::URIDNSBL
|
||||
|
||||
# Hashcash - perform hashcash verification.
|
||||
#
|
||||
#loadplugin Mail::SpamAssassin::Plugin::Hashcash
|
||||
|
||||
# SPF - perform SPF verification.
|
||||
#
|
||||
#loadplugin Mail::SpamAssassin::Plugin::SPF
|
||||
|
||||
|
|
@ -1,89 +0,0 @@
|
|||
# This is the right place to customize your installation of SpamAssassin.
|
||||
#
|
||||
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
|
||||
# tweaked.
|
||||
#
|
||||
# Only a small subset of options are listed below
|
||||
#
|
||||
###########################################################################
|
||||
|
||||
# Add *****SPAM***** to the Subject header of spam e-mails
|
||||
#
|
||||
# rewrite_header Subject *****SPAM*****
|
||||
|
||||
|
||||
# Save spam messages as a message/rfc822 MIME attachment instead of
|
||||
# modifying the original message (0: off, 2: use text/plain instead)
|
||||
#
|
||||
# report_safe 1
|
||||
|
||||
|
||||
# Set which networks or hosts are considered 'trusted' by your mail
|
||||
# server (i.e. not spammers)
|
||||
#
|
||||
# trusted_networks 212.17.35.
|
||||
|
||||
|
||||
# Set file-locking method (flock is not safe over NFS, but is faster)
|
||||
#
|
||||
# lock_method flock
|
||||
|
||||
|
||||
# Set the threshold at which a message is considered spam (default: 5.0)
|
||||
#
|
||||
# required_score 5.0
|
||||
|
||||
|
||||
# Use Bayesian classifier (default: 1)
|
||||
#
|
||||
# use_bayes 1
|
||||
|
||||
|
||||
# Bayesian classifier auto-learning (default: 1)
|
||||
#
|
||||
# bayes_auto_learn 1
|
||||
|
||||
|
||||
# Set headers which may provide inappropriate cues to the Bayesian
|
||||
# classifier
|
||||
#
|
||||
# bayes_ignore_header X-Bogosity
|
||||
# bayes_ignore_header X-Spam-Flag
|
||||
# bayes_ignore_header X-Spam-Status
|
||||
|
||||
|
||||
# Whether to decode non- UTF-8 and non-ASCII textual parts and recode
|
||||
# them to UTF-8 before the text is given over to rules processing.
|
||||
#
|
||||
# normalize_charset 1
|
||||
|
||||
# Some shortcircuiting, if the plugin is enabled
|
||||
#
|
||||
ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
|
||||
#
|
||||
# default: strongly-whitelisted mails are *really* whitelisted now, if the
|
||||
# shortcircuiting plugin is active, causing early exit to save CPU load.
|
||||
# Uncomment to turn this on
|
||||
#
|
||||
# shortcircuit USER_IN_WHITELIST on
|
||||
# shortcircuit USER_IN_DEF_WHITELIST on
|
||||
# shortcircuit USER_IN_ALL_SPAM_TO on
|
||||
# shortcircuit SUBJECT_IN_WHITELIST on
|
||||
|
||||
# the opposite; blacklisted mails can also save CPU
|
||||
#
|
||||
# shortcircuit USER_IN_BLACKLIST on
|
||||
# shortcircuit USER_IN_BLACKLIST_TO on
|
||||
# shortcircuit SUBJECT_IN_BLACKLIST on
|
||||
|
||||
# if you have taken the time to correctly specify your "trusted_networks",
|
||||
# this is another good way to save CPU
|
||||
#
|
||||
# shortcircuit ALL_TRUSTED on
|
||||
|
||||
# and a well-trained bayes DB can save running rules, too
|
||||
#
|
||||
# shortcircuit BAYES_99 spam
|
||||
# shortcircuit BAYES_00 ham
|
||||
|
||||
endif # Mail::SpamAssassin::Plugin::Shortcircuit
|
||||
|
|
@ -17,7 +17,7 @@
|
|||
# RelayCountry - add metadata for Bayes learning, marking the countries
|
||||
# a message was relayed through
|
||||
#
|
||||
# Note: This requires the IP::Country::Fast Perl module
|
||||
# Note: This requires the Geo::IP Perl module
|
||||
#
|
||||
# loadplugin Mail::SpamAssassin::Plugin::RelayCountry
|
||||
|
||||
|
|
|
|||
|
|
@ -52,6 +52,11 @@
|
|||
# bayes_ignore_header X-Spam-Status
|
||||
|
||||
|
||||
# Whether to decode non- UTF-8 and non-ASCII textual parts and recode
|
||||
# them to UTF-8 before the text is given over to rules processing.
|
||||
#
|
||||
# normalize_charset 1
|
||||
|
||||
# Some shortcircuiting, if the plugin is enabled
|
||||
#
|
||||
ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
|
||||
|
|
@ -82,4 +87,3 @@ ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
|
|||
# shortcircuit BAYES_00 ham
|
||||
|
||||
endif # Mail::SpamAssassin::Plugin::Shortcircuit
|
||||
|
||||
|
|
|
|||
|
|
@ -1,140 +0,0 @@
|
|||
# /etc/mysql/my.cnf: The global mysql configuration file.
|
||||
# $Id$
|
||||
|
||||
# The following options will be passed to all MySQL clients
|
||||
[client]
|
||||
#password = your_password
|
||||
port = 3306
|
||||
socket = /var/run/mysqld/mysqld.sock
|
||||
|
||||
[mysql]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[mysqladmin]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[mysqlcheck]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[mysqldump]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[mysqlimport]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[mysqlshow]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
default-character-set=utf8
|
||||
|
||||
[myisamchk]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
|
||||
[myisampack]
|
||||
character-sets-dir=/usr/share/mysql/charsets
|
||||
|
||||
# use [safe_mysqld] with mysql-3
|
||||
[mysqld_safe]
|
||||
err-log = /var/log/mysql/mysql.err
|
||||
|
||||
# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
|
||||
[mysqld]
|
||||
character-set-server = utf8
|
||||
user = mysql
|
||||
port = 3306
|
||||
socket = /var/run/mysqld/mysqld.sock
|
||||
pid-file = /var/run/mysqld/mysqld.pid
|
||||
log-error = /var/log/mysql/mysqld.err
|
||||
basedir = /usr
|
||||
datadir = /var/lib/mysql
|
||||
skip-external-locking
|
||||
key_buffer_size = 16M
|
||||
max_allowed_packet = 4M
|
||||
table_open_cache = 400
|
||||
sort_buffer_size = 512K
|
||||
net_buffer_length = 16K
|
||||
read_buffer_size = 256K
|
||||
read_rnd_buffer_size = 512K
|
||||
myisam_sort_buffer_size = 8M
|
||||
lc_messages_dir = /usr/share/mysql
|
||||
#Set this to your desired error message language
|
||||
lc_messages = en_US
|
||||
|
||||
# security:
|
||||
# using "localhost" in connects uses sockets by default
|
||||
# skip-networking
|
||||
bind-address = 127.0.0.1
|
||||
|
||||
log-bin
|
||||
server-id = 1
|
||||
|
||||
# point the following paths to different dedicated disks
|
||||
tmpdir = /tmp/
|
||||
#log-update = /path-to-dedicated-directory/hostname
|
||||
|
||||
# you need the debug USE flag enabled to use the following directives,
|
||||
# if needed, uncomment them, start the server and issue
|
||||
# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
|
||||
# this will show you *exactly* what's happening in your server ;)
|
||||
|
||||
#log = /tmp/mysqld.sql
|
||||
#gdb
|
||||
#debug = d:t:i:o,/tmp/mysqld.trace
|
||||
#one-thread
|
||||
|
||||
# the rest of the innodb config follows:
|
||||
# don't eat too much memory, we're trying to be safe on 64Mb boxes
|
||||
# you might want to bump this up a bit on boxes with more RAM
|
||||
innodb_buffer_pool_size = 128M
|
||||
#
|
||||
# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(
|
||||
# and upstream wants things to be under /var/lib/mysql/, so that's the route
|
||||
# we have to take for the moment
|
||||
#innodb_data_home_dir = /var/lib/mysql/
|
||||
#innodb_log_group_home_dir = /var/lib/mysql/
|
||||
# you may wish to change this size to be more suitable for your system
|
||||
# the max is there to avoid run-away growth on your machine
|
||||
innodb_data_file_path = ibdata1:10M:autoextend:max:128M
|
||||
# we keep this at around 25% of of innodb_buffer_pool_size
|
||||
# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)
|
||||
innodb_log_file_size = 48M
|
||||
# this is the default, increase it if you have very large transactions going on
|
||||
innodb_log_buffer_size = 8M
|
||||
# this is the default and won't hurt you
|
||||
# you shouldn't need to tweak it
|
||||
innodb_log_files_in_group=2
|
||||
# see the innodb config docs, the other options are not always safe
|
||||
innodb_flush_log_at_trx_commit = 1
|
||||
innodb_lock_wait_timeout = 50
|
||||
innodb_file_per_table
|
||||
|
||||
# Uncomment this to get FEDERATED engine support
|
||||
#plugin-load=federated=ha_federated.so
|
||||
loose-federated
|
||||
|
||||
[mysqldump]
|
||||
quick
|
||||
max_allowed_packet = 16M
|
||||
|
||||
[mysql]
|
||||
# uncomment the next directive if you are not familiar with SQL
|
||||
#safe-updates
|
||||
|
||||
[isamchk]
|
||||
key_buffer_size = 20M
|
||||
sort_buffer_size = 20M
|
||||
read_buffer = 2M
|
||||
write_buffer = 2M
|
||||
|
||||
[myisamchk]
|
||||
key_buffer_size = 20M
|
||||
sort_buffer_size = 20M
|
||||
read_buffer_size = 2M
|
||||
write_buffer_size = 2M
|
||||
|
||||
[mysqlhotcopy]
|
||||
interactive-timeout
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
# /etc/mysql/my.cnf: The global mysql configuration file.
|
||||
# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.6,v 1.1 2014/10/08 16:42:41 grknight Exp $
|
||||
# $Id$
|
||||
|
||||
# The following options will be passed to all MySQL clients
|
||||
[client]
|
||||
|
|
@ -95,7 +95,6 @@ innodb_buffer_pool_size = 128M
|
|||
# and upstream wants things to be under /var/lib/mysql/, so that's the route
|
||||
# we have to take for the moment
|
||||
#innodb_data_home_dir = /var/lib/mysql/
|
||||
#innodb_log_arch_dir = /var/lib/mysql/
|
||||
#innodb_log_group_home_dir = /var/lib/mysql/
|
||||
# you may wish to change this size to be more suitable for your system
|
||||
# the max is there to avoid run-away growth on your machine
|
||||
|
|
|
|||
5
wgetrc
5
wgetrc
|
|
@ -16,6 +16,9 @@
|
|||
## To use the settings in this file, you will have to uncomment them,
|
||||
## as well as change them, in most cases, as the values on the
|
||||
## commented-out lines are the default values (e.g. "off").
|
||||
##
|
||||
## Command are case-, underscore- and minus-insensitive.
|
||||
## For example ftp_proxy, ftp-proxy and ftpproxy are the same.
|
||||
|
||||
|
||||
##
|
||||
|
|
@ -122,7 +125,7 @@
|
|||
#iri = off
|
||||
|
||||
# Force the default system encoding
|
||||
#locale = UTF-8
|
||||
#localencoding = UTF-8
|
||||
|
||||
# Force the default remote server encoding
|
||||
#remoteencoding = UTF-8
|
||||
|
|
|
|||
Chargement…
Référencer dans un nouveau ticket