hasufell/etc-gentoo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Blah

Browse Source
This commit is contained in:
Hans Wurst
2015-07-31 02:34:53 +02:00
parent d02a7cedc8
commit 4d9533ca0a
161 changed files with 248 additions and 30687 deletions
Download Patch File Download Diff File Expand all files Collapse all files

191
apache2/vhosts.d/._cfg0000_00_default_ssl_vhost.conf
View File

@@ -1,191 +0,0 @@
<IfDefine SSL>
<IfDefine SSL_DEFAULT_VHOST>
<IfModule ssl_module>
# see bug #178966 why this is in here
# When we also provide SSL we have to listen to the HTTPS port
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
Listen 443
<VirtualHost _default_:443>
ServerName localhost
Include /etc/apache2/vhosts.d/default_vhost.include
ErrorLog /var/log/apache2/ssl_error_log
<IfModule log_config_module>
TransferLog /var/log/apache2/ssl_access_log
</IfModule>
## SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
## SSLProtocol:
# Don't use SSLv2 anymore as it's considered to be broken security-wise.
# Also disable SSLv3 as most modern browsers are capable of TLS.
SSLProtocol ALL -SSLv2 -SSLv3
## SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
# This list of ciphers is recommended by mozilla and was stripped off
# its RC4 ciphers. (bug #506924)
SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128:AES256:HIGH:!RC4:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK
## SSLHonorCipherOrder:
# Prefer the server's cipher preference order as the client may have a
# weak default order.
SSLHonorCipherOrder On
## Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If the certificate
# is encrypted, then you will be prompted for a pass phrase. Note that a
# kill -HUP will prompt again. Keep in mind that if you have both an RSA
# and a DSA certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/ssl/apache2/server.crt
## Server Private Key:
# If the key is not combined with the certificate, use this directive to
# point at the key file. Keep in mind that if you've both a RSA and a DSA
# private key you can configure both in parallel (to also allow the use of
# DSA ciphers, etc.)
SSLCertificateKeyFile /etc/ssl/apache2/server.key
## Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the concatenation of
# PEM encoded CA certificates which form the certificate chain for the
# server certificate. Alternatively the referenced file can be the same as
# SSLCertificateFile when the CA certificates are directly appended to the
# server certificate for convinience.
#SSLCertificateChainFile /etc/ssl/apache2/ca.crt
## Certificate Authority (CA):
# Set the CA certificate verification path where to find CA certificates
# for client authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# Note: Inside SSLCACertificatePath you need hash symlinks to point to the
# certificate files. Use the provided Makefile to update the hash symlinks
# after changes.
#SSLCACertificatePath /etc/ssl/apache2/ssl.crt
#SSLCACertificateFile /etc/ssl/apache2/ca-bundle.crt
## Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client authentication
# or alternatively one huge file containing all of them (file must be PEM
# encoded).
# Note: Inside SSLCARevocationPath you need hash symlinks to point to the
# certificate files. Use the provided Makefile to update the hash symlinks
# after changes.
#SSLCARevocationPath /etc/ssl/apache2/ssl.crl
#SSLCARevocationFile /etc/ssl/apache2/ca-bundle.crl
## Client Authentication (Type):
# Client certificate verification type and depth. Types are none, optional,
# require and optional_no_ca. Depth is a number which specifies how deeply
# to verify the certificate issuer chain before deciding the certificate is
# not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
## Access Control:
# With SSLRequire you can do per-directory access control based on arbitrary
# complex boolean expressions containing server variable checks and other
# lookup directives. The syntax is a mixture between C and Perl. See the
# mod_ssl documentation for more details.
#<Location />
# #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
## SSL Engine Options:
# Set various options for the SSL engine.
## FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that the
# standard Auth/DBMAuth methods can be used for access control. The user
# name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
## ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the server
# (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates into
# CGI scripts.
## StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the exportation
# for CGI and SSI requests only.
## StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even under
# a "Satisfy any" situation, i.e. when it applies access is denied and no
# other module can change it.
## OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/var/www/localhost/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
## SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait
# for the close notify alert from client. When you need a different
# shutdown approach you can use one of the following variables:
## ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates the
# SSL/TLS standard but is needed for some brain-dead browsers. Use this when
# you receive I/O errors because of the standard approach where mod_ssl
# sends the close notify alert.
## ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation works
# correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
<IfModule setenvif_module>
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
</IfModule>
## Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a compact
# non-error SSL logfile on a virtual host basis.
<IfModule log_config_module>
CustomLog /var/log/apache2/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</IfModule>
</VirtualHost>
</IfModule>
</IfDefine>
</IfDefine>
# vim: ts=4 filetype=apache

14
apache2/vhosts.d/00_default_ssl_vhost.conf
View File

@@ -21,10 +21,22 @@ Listen 443
# Enable/Disable SSL for this virtual host.
SSLEngine on
## SSLProtocol:
# Don't use SSLv2 anymore as it's considered to be broken security-wise.
# Also disable SSLv3 as most modern browsers are capable of TLS.
SSLProtocol ALL -SSLv2 -SSLv3
## SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# This list of ciphers is recommended by mozilla and was stripped off
# its RC4 ciphers. (bug #506924)
SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128:AES256:HIGH:!RC4:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK
## SSLHonorCipherOrder:
# Prefer the server's cipher preference order as the client may have a
# weak default order.
SSLHonorCipherOrder On
## Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If the certificate