diff --git a/._cfg0002_rc.conf b/._cfg0002_rc.conf
new file mode 100644
index 0000000..5cef074
--- /dev/null
+++ b/._cfg0002_rc.conf
@@ -0,0 +1,227 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# ""               - nothing special
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0"           - Xen0 Domain
+# "xenU"           - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
diff --git a/init.d/._cfg0000_consolefont b/init.d/._cfg0000_consolefont
new file mode 100755
index 0000000..5b175a6
--- /dev/null
+++ b/init.d/._cfg0000_consolefont
@@ -0,0 +1,63 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Sets a font for the consoles."
+
+depend()
+{
+	need localmount termencoding
+	after hotplug bootmisc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+}
+
+start()
+{
+	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+	consolefont=${consolefont:-${CONSOLEFONT}}
+	unicodemap=${unicodemap:-${UNICODEMAP}}
+	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
+
+	if [ -z "$consolefont" ]; then
+		ebegin "Using the default console font"
+		eend 0
+		return 0
+	fi
+
+	if [ "$ttyn" = 0 ]; then
+		ebegin "Skipping font setup (rc_tty_number == 0)"
+		eend 0
+		return 0
+	fi
+
+	local x= param= sf_param= retval=0 ttydev=/dev/tty
+
+	# Get additional parameters
+	if [ -n "$consoletranslation" ]; then
+		param="$param -m $consoletranslation"
+	fi
+	if [ -n "${unicodemap}" ]; then
+		param="$param -u $unicodemap"
+	fi
+
+	# Set the console font
+	ebegin "Setting console font [$consolefont]"
+	[ -d /dev/vc ] && ttydev=/dev/vc/
+	x=1
+	while [ $x -le $ttyn ]; do
+		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
+			retval=1
+			break
+		fi
+		: $(( x += 1 ))
+	done
+	eend $retval
+
+	# Store the font so we can use it ASAP on boot
+	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		setfont -O "$RC_LIBEXECDIR"/console/font
+	fi
+
+	return $retval
+}
diff --git a/init.d/._cfg0000_dmesg b/init.d/._cfg0000_dmesg
new file mode 100755
index 0000000..be6f774
--- /dev/null
+++ b/init.d/._cfg0000_dmesg
@@ -0,0 +1,18 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Set the dmesg level for a cleaner boot"
+
+depend()
+{
+	before dev modules
+	keyword -lxc -prefix -systemd-nspawn -vserver
+}
+
+start()
+{
+	if [ -n "$dmesg_level" ]; then
+		dmesg -n$dmesg_level
+	fi
+}
diff --git a/init.d/._cfg0000_fsck b/init.d/._cfg0000_fsck
new file mode 100755
index 0000000..8f43607
--- /dev/null
+++ b/init.d/._cfg0000_fsck
@@ -0,0 +1,123 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Check and repair filesystems according to /etc/fstab"
+_IFS="
+"
+
+depend()
+{
+	use dev clock modules
+	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
+}
+
+_abort() {
+	rc-abort
+	return 1
+}
+
+# We should only reboot when first booting
+_reboot() {
+	if [ "$RC_RUNLEVEL" = "$RC_BOOTLEVEL" ]; then
+		reboot "$@"
+		_abort || return 1
+	fi
+}
+
+_forcefsck()
+{
+	[ -e /forcefsck ] || get_bootparam forcefsck
+}
+
+start()
+{
+	local fsck_opts= p= check_extra=
+
+	if [ -e /fastboot ]; then
+		ewarn "Skipping fsck due to /fastboot"
+		return 0
+	fi
+	if _forcefsck; then
+		fsck_opts="$fsck_opts -f"
+		check_extra="(check forced)"
+	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
+		ewarn "Skipping fsck due to not being on AC power"
+		return 0
+	fi
+
+	if [ -n "$fsck_passno" ]; then
+		check_extra="[passno $fsck_passno] $check_extra"
+		if [ -n "$fsck_mnt" ]; then
+			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
+			return 1
+		fi
+	fi
+	ebegin "Checking local filesystems $check_extra"
+	# Append passno mounts
+	for p in $fsck_passno; do
+		local IFS="$_IFS"
+		case "$p" in
+			[0-9]*) p="=$p";;
+		esac
+		set -- "$@" $(fstabinfo --passno "$p")
+		unset IFS
+	done
+	# Append custom mounts
+	for m in $fsck_mnt ; do
+		local IFS="$_IFS"
+		set -- "$@" "$m"
+		unset IFS
+	done
+
+	if [ "$RC_UNAME" = Linux ]; then
+		local skiptypes
+		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
+		[ "${skiptypes}" = "no," ] && skiptypes=""
+		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
+		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
+			fsck_args=${fsck_args:--A -p}
+			if echo 2>/dev/null >/.test.$$; then
+				rm -f /.test.$$
+				fsck_opts="$fsck_opts -R"
+			fi
+		fi
+	fi
+
+	trap : INT QUIT
+	fsck ${fsck_args:--p} $fsck_opts "$@"
+	case $? in
+	0)	eend 0; return 0;;
+	1)	ewend 1 "Filesystems repaired"; return 0;;
+	2|3)	if [ "$RC_UNAME" = Linux ]; then
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+	         	_reboot -f
+		else
+			ewend 1 "Filesystems still have errors;" \
+				"manual fsck required"
+			_abort
+		fi;;
+	4)	if [ "$RC_UNAME" = Linux ]; then
+			ewend 1 "Fileystem errors left uncorrected, aborting"
+			_abort
+		else
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+			_reboot
+		fi;;
+	8)	ewend 1 "Operational error"; return 0;;
+	12)	ewend 1 "fsck interrupted";;
+	*)	eend 2 "Filesystems couldn't be fixed";;
+	esac
+	_abort || return 1
+}
+
+stop()
+{
+	# Fake function so we always shutdown correctly.
+	_abort() { return 0; }
+	_reboot() { return 0; }
+	_forcefsck() { return 1; }
+
+	yesno $fsck_shutdown && start
+	return 0
+}
diff --git a/init.d/._cfg0000_hostname b/init.d/._cfg0000_hostname
new file mode 100755
index 0000000..b6f87b7
--- /dev/null
+++ b/init.d/._cfg0000_hostname
@@ -0,0 +1,19 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Sets the hostname of the machine."
+
+depend() {
+	keyword -prefix -systemd-nspawn -lxc
+}
+
+start()
+{
+	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+	# It is also a magic variable in bash.
+	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
+	ebegin "Setting hostname to $hostname"
+	hostname "$hostname"
+	eend $? "Failed to set the hostname"
+}
diff --git a/init.d/._cfg0000_keymaps b/init.d/._cfg0000_keymaps
new file mode 100755
index 0000000..3ab4556
--- /dev/null
+++ b/init.d/._cfg0000_keymaps
@@ -0,0 +1,70 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Applies a keymap for the consoles."
+
+depend()
+{
+	need localmount termencoding
+	after bootmisc
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+}
+
+start()
+{
+	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+	: ${unicode:=$UNICODE}
+	: ${keymap:=$KEYMAP}
+	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
+	: ${windowkeys:=$SET_WINDOWSKEYS}
+	: ${fix_euro:=$FIX_EURO}
+	: ${dumpkeys_charset:=${DUMPKEYS_CHARSET}}
+
+	if [ -z "$keymap" ]; then
+		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
+		return 1
+	fi
+
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
+
+	# Force linux keycodes for PPC.
+	if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then
+		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
+	fi
+
+	local wkeys= kmode="-a" msg="ASCII"
+	if yesno $unicode; then
+		kmode="-u"
+		msg="UTF-8"
+	fi
+	yesno $windowkeys && wkeys="windowkeys"
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		: $(( n += 1 ))
+	done
+	eend 0
+
+	ebegin "Loading key mappings [$keymap]"
+	loadkeys -q $wkeys $keymap $extended_keymaps
+	eend $? "Error loading key mappings" || return $?
+
+	if yesno $fix_euro; then
+		ebegin "Fixing font for euro symbol"
+		# Fix some fonts displaying the Euro, #173528.
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
+		eend $?
+	fi
+
+	# Save the keymapping for use immediately at boot
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
+	fi
+}
diff --git a/init.d/._cfg0000_modules b/init.d/._cfg0000_modules
new file mode 100755
index 0000000..e959236
--- /dev/null
+++ b/init.d/._cfg0000_modules
@@ -0,0 +1,63 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Loads a user defined list of kernel modules."
+
+depend()
+{
+	use isapnp
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	# Should not fail if kernel do not have module
+	# support compiled in ...
+	[ ! -f /proc/modules ] && return 0
+
+	local KV x y kv_variant_list
+	KV=$(uname -r)
+	# full $KV
+	kv_variant_list="${KV}"
+	# remove any KV_EXTRA options to just get the full version
+	x=${KV%%-*}
+	# now slowly strip them
+	while [ -n "$x" ] && [ "$x" != "$y" ]; do
+		kv_variant_list="${kv_variant_list} $x"
+		y=$x
+		x=${x%.*}
+	done
+
+	local list= x= xx= y= args= mpargs= cnt=0 a=
+	for x in $kv_variant_list ; do
+		eval list=\$modules_$(shell_var "$x")
+		[ -n "$list" ] && break
+	done
+	[ -z "$list" ] && list=$modules
+
+	for x in $list; do
+		a=${x#*:}
+		if [ "$a" = "$x" ]; then
+			unset mpargs
+			ebegin "Loading module $x"
+		else
+			x=${x%%:*}
+			mpargs="-o $a"
+			ebegin "Loading module $x as $a"
+		fi
+		aa=$(shell_var "$a")
+		xx=$(shell_var "$x")
+		for y in $kv_variant_list ; do
+			eval args=\$module_${aa}_args_$(shell_var "$y")
+			[ -n "${args}" ] && break
+			eval args=\$module_${xx}_args_$(shell_var "$y")
+			[ -n "${args}" ] && break
+		done
+		[ -z "$args" ] && eval args=\$module_${aa}_args
+		[ -z "$args" ] && eval args=\$module_${xx}_args
+		eval modprobe -q "$mpargs" "$x" "$args"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+	done
+	einfo "Autoloaded $cnt module(s)"
+}
diff --git a/init.d/._cfg0000_numlock b/init.d/._cfg0000_numlock
new file mode 100755
index 0000000..2cd61aa
--- /dev/null
+++ b/init.d/._cfg0000_numlock
@@ -0,0 +1,42 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Turns numlock on for the consoles."
+
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+
+depend()
+{
+	need localmount
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+_setleds()
+{
+	[ -z "$1" ] && return 1
+
+	local dev=/dev/tty t= i=1 retval=0
+	[ -d /dev/vc ] && dev=/dev/vc/
+
+	while [ $i -le $ttyn ]; do
+		setleds -D "$1"num < $dev$i || retval=1
+		: $(( i += 1 ))
+	done
+
+	return $retval
+}
+
+start()
+{
+	ebegin "Enabling numlock on ttys"
+	_setleds +
+	eend $? "Failed to enable numlock"
+}
+
+stop()
+{
+	ebegin "Disabling numlock on ttys"
+	_setleds -
+	eend $? "Failed to disable numlock"
+}
diff --git a/init.d/._cfg0000_root b/init.d/._cfg0000_root
new file mode 100755
index 0000000..550bcf9
--- /dev/null
+++ b/init.d/._cfg0000_root
@@ -0,0 +1,53 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mount the root fs read/write"
+
+depend()
+{
+	need fsck
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	case ",$(fstabinfo -o /)," in
+		*,ro,*)
+		;;
+		*)
+			# Check if the rootfs isn't already writable.
+			if checkpath -W /; then
+				rm -f /fastboot /forcefsck
+			else
+				ebegin "Remounting root filesystem read/write"
+				case "$RC_UNAME" in
+					Linux)
+						mount -n -o remount,rw /
+					;;
+					*)
+						mount -u -o rw /
+					;;
+				esac
+				eend $? "Root filesystem could not be mounted read/write"
+				if [ $?  -eq 0 ]; then
+					rm -f /fastboot /forcefsck
+				fi
+			fi
+		;;
+	esac
+
+	ebegin "Remounting filesystems"
+	local mountpoint
+	for mountpoint in $(fstabinfo); do
+		case "${mountpoint}" in
+			/)
+			;;
+			/*)
+				mountinfo -q "${mountpoint}" && \
+					fstabinfo --remount "${mountpoint}"
+			;;
+		esac
+	done
+	eend 0
+}
diff --git a/init.d/._cfg0000_swap b/init.d/._cfg0000_swap
new file mode 100755
index 0000000..bae812b
--- /dev/null
+++ b/init.d/._cfg0000_swap
@@ -0,0 +1,36 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	before localmount
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	ebegin "Activating swap devices"
+	case "$RC_UNAME" in
+		Linux)		swapon -a -e >/dev/null;;
+		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
+		*)		swapon -a >/dev/null;;
+	esac
+	eend 0 # If swapon has nothing todo it errors, so always return 0
+}
+
+stop()
+{
+	ebegin "Deactivating swap devices"
+
+	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
+	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+	cd "$RC_SVCDIR"
+	umount -a -t tmpfs 2>/dev/null
+
+	case "$RC_UNAME" in
+		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
+		*)		swapoff -a >/dev/null;;
+	esac
+	eend 0
+}
diff --git a/init.d/._cfg0000_swapfiles b/init.d/._cfg0000_swapfiles
new file mode 100755
index 0000000..5ab4b36
--- /dev/null
+++ b/init.d/._cfg0000_swapfiles
@@ -0,0 +1,39 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	need localmount
+	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	ebegin "Activating additional swap space"
+	case "$RC_UNAME" in
+		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
+		*)		swapon -a >/dev/null;;
+	esac
+	eend 0 # If swapon has nothing todo it errors, so always return 0
+}
+
+stop()
+{
+	ebegin "Deactivating additional swap space"
+	case "$RC_UNAME" in
+		Linux)
+			if [ -e /proc/swaps ]; then
+				while read filename type rest; do
+					case "$type" in
+						file) swapoff $filename >/dev/null;;
+					esac
+					case "$filename" in
+						/dev/loop*) swapoff $filename >/dev/null;;
+					esac
+				done < /proc/swaps
+			fi
+			;;
+	esac
+	eend 0
+}
diff --git a/init.d/._cfg0000_termencoding b/init.d/._cfg0000_termencoding
new file mode 100755
index 0000000..85f9df3
--- /dev/null
+++ b/init.d/._cfg0000_termencoding
@@ -0,0 +1,48 @@
+#!/sbin/openrc-run
+# Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Configures terminal encoding."
+
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+: ${unicode:=${UNICODE}}
+
+depend()
+{
+	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	use root
+	after bootmisc
+}
+
+start()
+{
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	local termencoding="%@" termmsg="ASCII"
+	if yesno ${unicode}; then
+		termencoding="%G"
+		termmsg="UTF-8"
+	fi
+
+	ebegin "Setting terminal encoding [$termmsg]"
+	n=1
+	while [ ${n} -le "$ttyn" ]; do
+		printf "\033%s" "$termencoding" >$ttydev$n
+		: $(( n += 1 ))
+	done
+
+	# Save the encoding for use immediately at boot
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		if yesno ${unicode:-${UNICODE}}; then
+			echo "" > "$RC_LIBEXECDIR"/console/unicode
+		else
+			rm -f "$RC_LIBEXECDIR"/console/unicode
+		fi
+	fi
+
+	eend 0
+}
diff --git a/init.d/._cfg0000_urandom b/init.d/._cfg0000_urandom
new file mode 100755
index 0000000..d6bb1dd
--- /dev/null
+++ b/init.d/._cfg0000_urandom
@@ -0,0 +1,45 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+: ${urandom_seed:=${URANDOM_SEED:-/var/lib/misc/random-seed}}
+description="Initializes the random number generator."
+
+depend()
+{
+	need localmount
+	keyword -jail -lxc -openvz -prefix -systemd-nspawn
+}
+
+save_seed()
+{
+	local psz=1
+
+	if [ -e /proc/sys/kernel/random/poolsize ]; then
+		: $(( psz = $(cat /proc/sys/kernel/random/poolsize) / 4096 ))
+	fi
+
+	(	# sub shell to prevent umask pollution
+		umask 077
+		dd if=/dev/urandom of="$urandom_seed" count=${psz} 2>/dev/null
+	)
+}
+
+start()
+{
+	[ -c /dev/urandom ] || return
+	if [ -f "$urandom_seed" ]; then
+		ebegin "Initializing random number generator"
+		cat "$urandom_seed" > /dev/urandom
+		eend $? "Error initializing random number generator"
+	fi
+	rm -f "$urandom_seed" && save_seed
+	return 0
+}
+
+stop()
+{
+	ebegin "Saving random seed"
+	save_seed
+	eend $? "Failed to save random seed"
+}
diff --git a/init.d/._cfg0001_bootmisc b/init.d/._cfg0001_bootmisc
new file mode 100755
index 0000000..cd9f457
--- /dev/null
+++ b/init.d/._cfg0001_bootmisc
@@ -0,0 +1,243 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	need localmount
+	before logger
+	after clock root sysctl
+	keyword -prefix -timeout
+}
+
+: ${wipe_tmp:=${WIPE_TMP:-yes}}
+: ${log_dmesg:=${LOG_DMESG:-yes}}
+
+cleanup_tmp_dir()
+{
+	local dir="$1"
+
+	if ! [ -d "$dir" ]; then
+		mkdir -p "$dir" || return $?
+	fi
+	checkpath -W "$dir" || return 1
+	chmod a+rwt "$dir" 2> /dev/null
+	cd "$dir" || return 1
+	if yesno $wipe_tmp; then
+		ebegin "Wiping $dir directory"
+
+		# Faster than raw find
+		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
+			# Blah, too many files
+			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
+		fi
+
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
+
+		# Prune the paths that are left
+		find . -maxdepth 1 \
+			! -name . \
+			! -name lost+found \
+			! -name quota.user \
+			! -name aquota.user \
+			! -name quota.group \
+			! -name aquota.group \
+			! -name journal \
+			-exec rm -rf -- {} +
+		eend 0
+	else
+		ebegin "Cleaning $dir directory"
+		rm -rf -- .X*-lock esrv* kio* \
+			jpsock.* .fam* .esd* \
+			orbit-* ssh-* ksocket-* \
+			.*-unix
+		eend 0
+	fi
+}
+
+cleanup_var_run_dir()
+{
+	ebegin "Cleaning /var/run"
+	for x in $(find /var/run ! -type d ! -name utmp \
+		! -name random-seed ! -name dev.db \
+		! -name ld-elf.so.hints ! -name ld.so.hints);
+	do
+		# Clean stale sockets
+		if [ -S "$x" ]; then
+			if command -v fuser >/dev/null 2>&1; then
+				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+			else
+				rm -- "$x"
+			fi
+		fi
+		[ ! -f "$x" ] && continue
+		# Do not remove pidfiles of already running daemons
+		case "$x" in
+			*.pid)
+				start-stop-daemon --test --quiet \
+				--stop --pidfile "$x" && continue
+			;;
+		esac
+		rm -f -- "$x"
+	done
+	eend 0
+}
+
+mkutmp()
+{
+	: >"$1"
+	# Not all systems have the utmp group
+	chgrp utmp "$1" 2>/dev/null
+	chmod 0664 "$1"
+}
+
+migrate_to_run()
+{
+	src="$1"
+	dst="$2"
+ 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
+ 		ewarn "$src does not point to $dst."
+ 		ewarn "Setting $src to point to $dst."
+ 		rm $src
+ 	elif [ ! -L $src -a -d $src ]; then
+ 		ebegin "Migrating $src to $dst"
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
+ 		eend $?
+ 	fi
+ 	# If $src doesn't exist at all, just run this
+ 	if [ ! -e $src ]; then
+ 		ln -s $dst $src
+ 	fi
+}
+
+clean_run()
+{
+	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
+	local dir
+	# If / is still read-only due to a problem, this will fail!
+	if ! checkpath -W /; then
+		eerror "/ is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	if ! checkpath -W /tmp; then
+		eerror "/tmp is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	# Now we know that we can modify /tmp and /
+	# if mktemp -d fails, it returns an EMPTY string
+	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+	# STDOUT: ''
+	rc=0
+	dir=$(mktemp -d)
+	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+		mount --bind / $dir && rm -rf $dir/run/* || rc=1
+		umount $dir
+		rm -rf $dir
+	else
+		rc=1
+	fi
+	if [ $rc -ne 0 ]; then
+		eerror "Could not clean up underlying /run on /"
+		return 1
+	fi
+}
+
+start()
+{
+	# Remove any added console dirs
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		rm -rf "$RC_LIBEXECDIR"/console/*
+	fi
+
+	local logw=false runw=false extra=
+	# Ensure that our basic dirs exist
+	if [ "$RC_UNAME" = Linux ]; then
+		# Satisfy Linux FHS
+		extra=/var/lib/misc
+		if [ ! -d /run ]; then
+			extra="/var/run $extra"
+		fi
+	else
+		extra=/var/run
+	fi
+	for x in /var/log /tmp $extra; do
+		if ! [ -d $x ]; then
+			if ! mkdir -p $x; then
+				eend 1 "failed to create needed directory $x"
+				return 1
+			fi
+		fi
+	done
+
+	if [ "$RC_UNAME" = Linux -a -d /run ]; then
+		migrate_to_run	/var/lock /run/lock
+		migrate_to_run	/var/run /run
+		clean_run
+	fi
+
+	if checkpath -W /var/run; then
+		ebegin "Creating user login records"
+		local xtra=
+		[ "$RC_UNAME" = NetBSD ] && xtra=x
+		for x in "" $xtra; do
+			mkutmp /var/run/utmp$x
+		done
+		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
+		eend 0
+
+		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
+	fi
+
+	# Clean up /tmp directories
+	local tmp=
+	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
+		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
+	done
+
+	if checkpath -W /tmp; then
+		# Make sure our X11 stuff have the correct permissions
+		# Omit the chown as bootmisc is run before network is up
+		# and users may be using lame LDAP auth #139411
+		rm -rf /tmp/.ICE-unix /tmp/.X11-unix
+		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
+		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
+		if [ -x /sbin/restorecon ]; then
+			restorecon /tmp/.ICE-unix /tmp/.X11-unix
+		fi
+	fi
+
+	if yesno $log_dmesg; then
+		if $logw || checkpath -W /var/log; then
+			# Create an 'after-boot' dmesg log
+			case "$RC_SYS" in
+				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+				*)
+					dmesg > /var/log/dmesg
+					chmod 640 /var/log/dmesg
+					;;
+			esac
+		fi
+	fi
+
+	return 0
+}
+
+stop()
+{
+	# Write a halt record if we're shutting down
+	if [ "$RC_RUNLEVEL" = shutdown ]; then
+		[ "$RC_UNAME" = Linux ] && halt -w
+		if [ "$RC_SYS" = OPENVZ ]; then
+			yesno $RC_REBOOT && printf "" >/reboot
+		fi
+	fi
+
+	return 0
+}
+
+# vim: ft=sh
diff --git a/init.d/._cfg0001_devfs b/init.d/._cfg0001_devfs
new file mode 100755
index 0000000..294f343
--- /dev/null
+++ b/init.d/._cfg0001_devfs
@@ -0,0 +1,121 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Set up the /dev directory"
+
+depend()
+{
+	provide dev-mount
+	before dev
+	keyword -prefix -systemd-nspawn -vserver -lxc
+}
+
+mount_dev()
+{
+	local action=--mount devfstype msg=Mounting
+	# Some devices require exec, Bug #92921
+	local mountopts="exec,nosuid,mode=0755"
+	if yesno ${skip_mount_dev:-no} ; then
+		einfo "/dev will not be mounted due to user request"
+		return 0
+	fi
+	if mountinfo -q /dev; then
+		action=--remount
+		mountopts="remount,$mountopts"
+		msg=Remounting
+	fi
+	if fstabinfo -q /dev; then
+		ebegin "$msg /dev according to /etc/fstab"
+		fstabinfo -q $action /dev
+		eend $?
+		return 0
+	fi
+	if grep -q devtmpfs /proc/filesystems; then
+		devfstype=devtmpfs
+		mountopts="$mountopts,size=10M"
+	elif grep -q tmpfs /proc/filesystems; then
+		devfstype=tmpfs
+		mountopts="$mountopts,size=10M"
+	fi
+	if [ -n "$devfstype" ]; then
+		ebegin "$msg $devfstype on /dev"
+		mount -n -t $devfstype -o $mountopts dev /dev
+		eend $?
+	else
+		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
+		ewarn "is no entry for /dev in fstab."
+		ewarn "This means /dev will not be mounted."
+		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
+		ewarn "in your kernel configuration or see /etc/conf.d/devfs"
+	fi
+	return 0
+}
+
+seed_dev()
+{
+	# Seed /dev with some things that we know we need
+
+	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
+	# to $CONSOLE with/without bootsplash before udevd creates it
+	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
+	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
+	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
+
+	# udevd will dup its stdin/stdout/stderr to /dev/null
+	# and we do not want a file which gets buffered in ram
+	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
+
+	# so udev can add its start-message to dmesg
+	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
+
+	# extra symbolic links not provided by default
+	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
+	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
+	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
+	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
+	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
+
+	# Mount required directories as user may not have them in /etc/fstab
+	for x in \
+		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
+		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
+		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
+	; do
+		set -- $x
+		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
+		mountinfo -q $2 && continue
+
+		if [ ! -d $2 ]; then
+			mkdir -m $3 -p $2 >/dev/null 2>&1 || \
+				ewarn "Could not create $2!"
+		fi
+
+		if [ -d $2 ]; then
+			ebegin "Mounting $2"
+			if ! fstabinfo --mount $2; then
+				mount -n -t $1 -o noexec,nosuid$4 $5 $2
+			fi
+			eend $?
+		fi
+	done
+}
+
+restorecon_dev()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /dev"
+		restorecon -rF /dev >/dev/null 2>&1
+		eend $?
+	fi
+
+	return 0
+}
+
+start()
+{
+	mount_dev
+	seed_dev
+	restorecon_dev
+	return 0
+}
diff --git a/init.d/._cfg0001_hwclock b/init.d/._cfg0001_hwclock
new file mode 100755
index 0000000..6da7f10
--- /dev/null
+++ b/init.d/._cfg0001_hwclock
@@ -0,0 +1,141 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+extra_commands="save show"
+
+description="Sets the local clock to UTC or Local Time."
+description_save="Saves the current time in the BIOS."
+description_show="Displays the current time in the BIOS."
+
+: ${clock_adjfile:=${CLOCK_ADJFILE}}
+: ${clock_args:=${CLOCK_OPTS}}
+: ${clock_systohc:=${CLOCK_SYSTOHC}}
+: ${clock:=${CLOCK:-UTC}}
+if [ "$clock" = "UTC" ]; then
+	utc="UTC"
+	utc_cmd="--utc"
+else
+	utc="Local Time"
+	utc_cmd="--localtime"
+fi
+
+depend()
+{
+	provide clock
+	if yesno $clock_adjfile; then
+		use root
+	else
+		before *
+	fi
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+}
+
+setupopts()
+{
+	case "$(uname -m)" in
+		s390*)
+			utc="s390"
+			;;
+		*)
+			if [ -e /proc/devices ] && \
+				grep -q " cobd$" /proc/devices
+			then
+				utc="coLinux"
+			fi
+			;;
+	esac
+
+	case "$utc" in
+		UTC|Local" "Time);;
+		*) unset utc_cmd;;
+	esac
+}
+
+# hwclock doesn't always return non zero on error
+_hwclock()
+{
+	local err="$(hwclock "$@" 2>&1 >/dev/null)"
+
+	[ -z "$err" ] && return 0
+	echo "${err}" >&2
+	return 1
+}
+
+start()
+{
+	local retval=0 errstr=""
+	setupopts
+
+	if [ -z "$utc_cmd" ]; then
+		ewarn "Not setting clock for $utc system"
+		return 0
+	fi
+
+	ebegin "Setting system clock using the hardware clock [$utc]"
+	if [ -e /proc/modules ]; then
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "$rtc" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		fi
+	fi
+
+	# Always set the kernel's time zone.
+	_hwclock --systz $utc_cmd $clock_args
+	: $(( retval += $? ))
+
+	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
+		_hwclock --adjust $utc_cmd
+		: $(( retval += $? ))
+	fi
+
+	if yesno ${clock_hctosys:-YES}; then
+		_hwclock --hctosys $utc_cmd $clock_args
+		: $(( retval += $? ))
+	fi
+
+	eend $retval "Failed to set the system clock"
+
+	return 0
+}
+
+stop()
+{
+	# Don't tweak the hardware clock on LiveCD halt.
+	[ -n "$CDBOOT" ] && return 0
+	yesno ${clock_systohc:-YES} || return 0
+
+	local retval=0 errstr=""
+	setupopts
+
+	[ -z "$utc_cmd" ] && return 0
+
+	ebegin "Setting hardware clock using the system clock" "[$utc]"
+
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			utc_cmd="$utc_cmd --noadjfile"
+		fi
+	fi
+
+	_hwclock --systohc $utc_cmd $clock_args
+	retval=$?
+
+	eend $retval "Failed to sync clocks"
+}
+
+save()
+{
+	clock_systohc=yes
+	stop
+}
+
+show()
+{
+	setupopts
+	hwclock --show "$utc_cmd" $clock_args
+}
diff --git a/init.d/._cfg0001_local b/init.d/._cfg0001_local
new file mode 100755
index 0000000..31e429e
--- /dev/null
+++ b/init.d/._cfg0001_local
@@ -0,0 +1,86 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Executes user programs in /etc/local.d"
+
+depend()
+{
+	after *
+	keyword -timeout
+}
+
+start()
+{
+	ebegin "Starting local"
+
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	eindent
+	for file in /etc/local.d/*.start; do
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
+	done
+	eoutdent
+
+	if command -v local_start >/dev/null 2>&1; then
+		ewarn "\"/etc/conf.d/local\" should be removed."
+		ewarn "Please move the code from the local_start function"
+		ewarn "to executable scripts with an .start extension"
+		ewarn "in \"/etc/local.d\""
+		local_start
+	fi
+
+	eend ${has_errors}
+
+	# We have to end with a zero exit code, because a failed execution
+	# of an executable /etc/local.d/*.start file shouldn't result in
+	# marking the local service as failed. Otherwise we are unable to
+	# execute any executable /etc/local.d/*.stop file, because a failed
+	# marked service cannot be stopped (and the stop function would
+	# actually call the executable /etc/local.d/*.stop file(s)).
+	return 0
+}
+
+stop()
+{
+	ebegin "Stopping local"
+
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	eindent
+	for file in /etc/local.d/*.stop; do
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			eval "${file}" $redirect
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
+	done
+	eoutdent
+
+	if command -v local_stop >/dev/null 2>&1; then
+		ewarn "\"/etc/conf.d/local\" should be removed."
+		ewarn "Please move the code from the local_stop function"
+		ewarn "to executable scripts with an .stop extension"
+		ewarn "in \"/etc/local.d\""
+		local_stop
+	fi
+
+	eend ${has_errors}
+
+	# An executable /etc/local.d/*.stop file which failed with a
+	# non-zero exit status is not a reason to mark this service
+	# as failed, therefore we have to end with a zero exit code.
+	return 0
+}
diff --git a/init.d/._cfg0001_localmount b/init.d/._cfg0001_localmount
new file mode 100755
index 0000000..ae9d3cf
--- /dev/null
+++ b/init.d/._cfg0001_localmount
@@ -0,0 +1,112 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mounts disks and swap according to /etc/fstab."
+
+depend()
+{
+	need fsck
+	use lvm modules mtab
+	after lvm modules
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	# Mount local filesystems in /etc/fstab.
+	local types="noproc" x= no_netdev=
+	for x in $net_fs_list $extra_net_fs_list; do
+		types="${types},no${x}"
+	done
+
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch "$RC_SVCDIR"/usr_premounted
+		fi
+	fi
+	ebegin "Mounting local filesystems"
+	mount -at "$types" $no_netdev
+	eend $? "Some local filesystem failed to mount"
+
+	# Always return 0 - some local mounts may not be critical for boot
+	return 0
+}
+
+stop()
+{
+	yesno $RC_GOINGDOWN || return 0
+	# We never unmount / or /dev or $RC_SVCDIR
+
+	# Bug 381783
+	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
+	# RC_NO_UMOUNTS is an env var that can be set by plugins
+	local IFS="$IFS:"
+	for x in $no_umounts $RC_NO_UMOUNTS; do
+		no_umounts_r="$no_umounts_r|$x"
+	done
+
+	if [ "$RC_UNAME" = Linux ]; then
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e "$rc_svcdir"/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
+	fi
+	no_umounts_r="^($no_umounts_r)$"
+
+	# Flush all pending disk writes now
+	sync
+
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+
+	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
+		#if / is aufs we remount it noxino during shutdown
+		if mountinfo -q -f '^aufs$' / ; then
+			mount -o remount,noxino,rw /
+			sync
+		fi
+
+		local aufs_branch aufs_mount_dir aufs_mount_point aufs_si_dir aufs_si_id
+		for aufs_si_dir in /sys/fs/aufs/*; do
+			aufs_mount_dir=${aufs_si_dir#/sys/fs/aufs/}
+			aufs_si_id="$(printf "%s" $aufs_mount_dir | sed 's/_/=/g')"
+			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
+			for x in $aufs_si_dir/br[0-9][0-9][0-9]; do
+				aufs_branch=$(sed 's/=.*//g' $x)
+				eindent
+				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
+					ewarn "Failed to remove branch $aufs_branch from aufs \
+						$aufs_mount_point"
+				fi
+				eoutdent
+				sync
+			done
+		done
+	fi
+
+	# Umount loop devices
+	einfo "Unmounting loop devices"
+	eindent
+	do_unmount "umount -d" --skip-point-regex "$no_umounts_r" \
+		--node-regex "^/dev/loop"
+	eoutdent
+
+	# Now everything else, except network filesystems as the
+	# network should be down by this point.
+	einfo "Unmounting filesystems"
+	eindent
+	local fs=
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+|}$x"
+	done
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount umount --skip-point-regex "$no_umounts_r" \
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	eoutdent
+
+	return 0
+}
diff --git a/init.d/._cfg0001_loopback b/init.d/._cfg0001_loopback
new file mode 100755
index 0000000..2b3b092
--- /dev/null
+++ b/init.d/._cfg0001_loopback
@@ -0,0 +1,35 @@
+#!/sbin/openrc-run
+# Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Configures the loopback interface."
+
+depend()
+{
+	keyword -jail -prefix -systemd-nspawn -vserver
+}
+
+start()
+{
+	if [ "$RC_UNAME" = Linux ]; then
+		ebegin "Bringing up network interface lo"
+		if command -v ip > /dev/null 2>&1; then
+			ip addr add 127.0.0.1/8 dev lo brd + scope host
+			ip route add 127.0.0.0/8 dev lo scope host
+			ip link set lo up
+		else
+			ifconfig lo 127.0.0.1 netmask 255.0.0.0
+			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
+		fi
+	else
+		ebegin "Bringing up network interface lo0"
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
+	fi
+	eend $?
+}
+
+stop()
+{
+	return 0
+}
diff --git a/init.d/._cfg0001_mount-ro b/init.d/._cfg0001_mount-ro
new file mode 100755
index 0000000..b2f3a53
--- /dev/null
+++ b/init.d/._cfg0001_mount-ro
@@ -0,0 +1,49 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Re-mount filesytems read-only for a clean reboot."
+
+depend()
+{
+	need killprocs savecache
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	local ret=0
+
+	# Flush all pending disk writes now
+	sync
+
+	ebegin "Remounting remaining filesystems read-only"
+	# We need the do_unmount function
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	eindent
+
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
+	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	# RC_NO_UMOUNTS is an env var that can be set by plugins
+	local IFS="$IFS:"
+	for x in $no_umounts $RC_NO_UMOUNTS; do
+		m="$m|$x"
+	done
+	m="^($m)$"
+	fs=
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+|}$x"
+	done
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount "umount -r" \
+		--skip-point-regex "$m" \
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	ret=$?
+
+	eoutdent
+
+	eend $ret
+}
diff --git a/init.d/._cfg0001_mtab b/init.d/._cfg0001_mtab
new file mode 100755
index 0000000..1389858
--- /dev/null
+++ b/init.d/._cfg0001_mtab
@@ -0,0 +1,41 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Update /etc/mtab to match what the kernel knows about"
+
+depend()
+{
+	need root
+	keyword -prefix -systemd-nspawn
+}
+
+start()
+{
+	[ -L /etc/mtab ] && return 0
+	local rc=0
+	ebegin "Updating /etc/mtab"
+	if ! checkpath -W /etc; then
+		rc=1
+	elif [ ! -e /etc/mtab ]; then
+		ln -snf /proc/self/mounts /etc/mtab
+	else
+		ewarn "The support for updating /etc/mtab as a file is"
+		ewarn "deprecated and will be removed in the future."
+		ewarn "Please run the following command as root on your system."
+		ewarn
+		ewarn "ln -snf /proc/self/mounts /etc/mtab"
+		ewarn
+
+		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+		# makes / readonly and dismounts all tmpfs even if in use which is
+		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+		# which allows this hack to work.
+		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
+
+		# Remove stale backups
+		rm -f /etc/mtab~ /etc/mtab~~
+	fi
+	eend $rc "/etc is not writable; unable to create /etc/mtab"
+	return 0
+}
diff --git a/init.d/._cfg0001_netmount b/init.d/._cfg0001_netmount
new file mode 100755
index 0000000..7949d68
--- /dev/null
+++ b/init.d/._cfg0001_netmount
@@ -0,0 +1,62 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mounts network shares according to /etc/fstab."
+
+depend()
+{
+	config /etc/fstab
+	use afc-client amd nfsclient autofs openvpn
+	use dns
+	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	local x= fs= rc=
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+,}$x"
+	done
+
+	ebegin "Mounting network filesystems"
+	mount -at $fs
+	rc=$?
+	if [ "$RC_UNAME" = Linux ]; then
+		mount -a -O _netdev
+		rc=$?
+	fi
+	ewend $rc "Could not mount all network filesystems"
+	return 0
+}
+
+stop()
+{
+	local x= fs=
+
+	ebegin "Unmounting network filesystems"
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+,}$x"
+	done
+	if [ -n "$fs" ]; then
+		umount -at $fs || eerror "Failed to simply unmount filesystems"
+	fi
+
+	eindent
+	fs=
+	for x in $net_fs_list $extra_net_fs_list; do
+		fs="$fs${fs:+|}$x"
+	done
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount umount ${fs:+--fstype-regex} $fs --netdev
+	retval=$?
+
+	eoutdent
+	if [ "$RC_UNAME" = Linux ]; then
+		umount -a -O _netdev
+		retval=$?
+	fi
+	eend $retval "Failed to unmount network filesystems"
+}
diff --git a/init.d/._cfg0001_procfs b/init.d/._cfg0001_procfs
new file mode 100755
index 0000000..57c0017
--- /dev/null
+++ b/init.d/._cfg0001_procfs
@@ -0,0 +1,27 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mounts misc filesystems in /proc."
+
+depend()
+{
+	use modules devfs
+	need localmount
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	# Setup Kernel Support for miscellaneous Binary Formats
+	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		modprobe -q binfmt-misc
+		if grep -qs binfmt_misc /proc/filesystems; then
+			ebegin "Mounting misc binary format filesystem"
+			mount -t binfmt_misc -o nodev,noexec,nosuid \
+				binfmt_misc /proc/sys/fs/binfmt_misc
+				eend $?
+		fi
+	fi
+	return 0
+}
diff --git a/init.d/._cfg0001_savecache b/init.d/._cfg0001_savecache
new file mode 100755
index 0000000..f3caa0a
--- /dev/null
+++ b/init.d/._cfg0001_savecache
@@ -0,0 +1,49 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Saves the caches OpenRC uses to non volatile storage"
+
+start()
+{
+	if [ -e "$RC_SVCDIR"/clock-skewed ]; then
+		ewarn "WARNING: clock skew detected!"
+		if ! yesno "${RC_GOINGDOWN}"; then
+			eerror "Not saving deptree cache"
+			return 1
+		fi
+	fi
+	if ! checkpath -W "$RC_LIBEXECDIR"; then
+		ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
+		if ! yesno "${RC_GOINGDOWN}"; then
+			ewarn "Unable to save deptree cache"
+			return 1
+		fi
+		return 0
+	fi
+	ebegin "Saving dependency cache"
+	local rc=
+	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
+		rm -rf "$RC_LIBEXECDIR"/cache
+		if ! mkdir -p "$RC_LIBEXECDIR"/cache; then
+			rc=$?
+			if yesno "${RC_GOINGDOWN}"; then
+				rc=0
+			fi
+			eend $rc "Unable to create $RC_SVCDIR/cache"
+			return $rc
+		fi
+	fi
+	local save=
+	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
+		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
+	done
+	if [ -n "$save" ]; then
+		cp -p $save "$RC_LIBEXECDIR"/cache 2>/dev/null
+	fi
+	rc=$?
+	if yesno "${RC_GOINGDOWN}"; then
+		rc=0
+	fi
+	eend $rc
+}
diff --git a/init.d/._cfg0001_swclock b/init.d/._cfg0001_swclock
new file mode 100755
index 0000000..d26621a
--- /dev/null
+++ b/init.d/._cfg0001_swclock
@@ -0,0 +1,30 @@
+#!/sbin/openrc-run
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Sets the local clock to the mtime of a given file."
+
+depend()
+{
+	before *
+	provide clock
+	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+}
+
+# swclock is an OpenRC built in
+
+start()
+{
+	ebegin "Setting the local clock based on last shutdown time"
+	if ! swclock 2> /dev/null; then
+	swclock --warn /sbin/openrc-run
+	fi
+	eend $?
+}
+
+stop()
+{
+	ebegin "Saving the shutdown time"
+	swclock --save
+	eend $?
+}
diff --git a/init.d/._cfg0001_sysctl b/init.d/._cfg0001_sysctl
new file mode 100755
index 0000000..5618a1d
--- /dev/null
+++ b/init.d/._cfg0001_sysctl
@@ -0,0 +1,19 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix -systemd-nspawn -vserver
+}
+
+start()
+{
+	local quiet
+	yesno $rc_verbose || quiet=-q
+
+	ebegin "Configuring kernel parameters"
+	sysctl ${quiet} --system
+	eend $? "Unable to configure some kernel parameters"
+}
diff --git a/init.d/._cfg0001_sysfs b/init.d/._cfg0001_sysfs
new file mode 100755
index 0000000..5dc62cd
--- /dev/null
+++ b/init.d/._cfg0001_sysfs
@@ -0,0 +1,151 @@
+#!/sbin/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+description="Mount the sys filesystem."
+
+sysfs_opts=nodev,noexec,nosuid
+
+depend()
+{
+	keyword -lxc -prefix -systemd-nspawn -vserver
+}
+
+mount_sys()
+{
+	grep -Eq "[[:space:]]+sysfs$" /proc/filesystems || return 1
+	mountinfo -q /sys && return 0
+
+	if [ ! -d /sys ]; then
+		if ! mkdir -m 0755 /sys; then
+			ewarn "Could not create /sys!"
+			return 1
+		fi
+	fi
+
+	ebegin "Mounting /sys"
+	if ! fstabinfo --mount /sys; then
+		mount -n -t sysfs -o ${sysfs_opts} sysfs /sys
+	fi
+	eend $?
+}
+
+mount_misc()
+{
+	# Setup Kernel Support for securityfs
+	if [ -d /sys/kernel/security ] && \
+		! mountinfo -q /sys/kernel/security; then
+		if grep -qs securityfs /proc/filesystems; then
+			ebegin "Mounting security filesystem"
+			mount -n -t securityfs -o ${sysfs_opts} \
+				securityfs /sys/kernel/security
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for debugfs
+	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
+		if grep -qs debugfs /proc/filesystems; then
+			ebegin "Mounting debug filesystem"
+			mount -n -t debugfs -o ${sysfs_opts} debugfs /sys/kernel/debug
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for configfs
+	if [ -d /sys/kernel/config ] && ! mountinfo -q /sys/kernel/config; then
+		if grep -qs configfs /proc/filesystems; then
+			ebegin "Mounting config filesystem"
+			mount -n -t configfs -o  ${sysfs_opts} configfs /sys/kernel/config
+			eend $?
+		fi
+	fi
+
+	# set up kernel support for cgroups
+	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
+		if grep -qs cgroup /proc/filesystems; then
+			ebegin "Mounting cgroup filesystem"
+			local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
+			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
+			eend $?
+		fi
+	fi
+
+	# set up kernel support for fusectl
+	if [ -d /sys/fs/fuse/connections ] \
+		&& ! mountinfo -q /sys/fs/fuse/connections; then
+		if grep -qs fusectl /proc/filesystems; then
+			ebegin "Mounting fuse control filesystem"
+			mount -n -t fusectl -o ${sysfs_opts} \
+				fusectl /sys/fs/fuse/connections
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for SELinux
+	if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
+		if grep -qs selinuxfs /proc/filesystems; then
+			ebegin "Mounting SELinux filesystem"
+			mount -t selinuxfs selinuxfs /sys/fs/selinux
+			eend $?
+		fi
+	fi
+
+	# setup up kernel support for efivarfs
+	# slightly complicated, as if it's build as a module but NOT yet loaded,
+	# it will NOT appear in /proc/filesystems yet
+	if [ -d /sys/firmware/efi/efivars ] \
+		&& ! mountinfo -q /sys/firmware/efi/efivars; then
+		modprobe -q efivarfs
+		if grep -qs efivarfs /proc/filesystems; then
+			ebegin "Mounting efivarfs filesystem"
+			mount -n -t efivarfs -o ${sysfs_opts} \
+				efivarfs /sys/firmware/efi/efivars
+			eend $?
+		fi
+	fi
+}
+
+mount_cgroups()
+{
+	mountinfo -q /sys/fs/cgroup || return 0
+
+	if ! mountinfo -q /sys/fs/cgroup/openrc; then
+		local agent="/lib64/rc/sh/cgroup-release-agent.sh"
+		mkdir /sys/fs/cgroup/openrc
+		mount -n -t cgroup \
+			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
+			openrc /sys/fs/cgroup/openrc
+		echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+	fi
+
+	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
+	while read name hier groups enabled rest; do
+		case "${enabled}" in
+			1)	mountinfo -q /sys/fs/cgroup/${name} && continue
+				mkdir /sys/fs/cgroup/${name}
+				mount -n -t cgroup -o ${sysfs_opts},${name} \
+					${name} /sys/fs/cgroup/${name}
+				;;
+		esac
+	done < /proc/cgroups
+}
+
+restorecon_sys()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /sys"
+		restorecon -F /sys/devices/system/cpu/online >/dev/null 2>&1
+		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
+		eend $?
+	fi
+}
+
+start()
+{
+	mount_sys
+	mount_misc
+	mount_cgroups
+	restorecon_sys
+	return 0
+}
diff --git a/init.d/._cfg0001_tmpfiles.dev b/init.d/._cfg0001_tmpfiles.dev
new file mode 100755
index 0000000..c7382ff
--- /dev/null
+++ b/init.d/._cfg0001_tmpfiles.dev
@@ -0,0 +1,20 @@
+#!/sbin/openrc-run
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="Set up tmpfiles.d entries"
+
+depend()
+{
+	use dev-mount
+	before dev
+	keyword -prefix -vserver
+}
+
+start()
+{
+	ebegin "Setting up tmpfiles.d entries for /dev"
+	/lib64/rc/sh/tmpfiles.sh --prefix=/dev --create --boot ${tmpfiles_opts}
+	eend $?
+	return 0
+}
diff --git a/init.d/._cfg0001_tmpfiles.setup b/init.d/._cfg0001_tmpfiles.setup
new file mode 100755
index 0000000..3d19cb0
--- /dev/null
+++ b/init.d/._cfg0001_tmpfiles.setup
@@ -0,0 +1,19 @@
+#!/sbin/openrc-run
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="Set up tmpfiles.d entries"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "Setting up tmpfiles.d entries"
+	/lib64/rc/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
+		${tmpfiles_opts}
+	eend $?
+	return 0
+}
diff --git a/init.d/binfmt b/init.d/binfmt
new file mode 100755
index 0000000..057c76f
--- /dev/null
+++ b/init.d/binfmt
@@ -0,0 +1,20 @@
+#!/sbin/openrc-run
+# Copyright 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+	after procfs
+	use modules devfs
+	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+}
+
+start()
+{
+	ebegin "Loading custom binary format handlers"
+	"$RC_LIBEXECDIR"/sh/binfmt.sh
+	eend $?
+return 0
+}
diff --git a/init.d/osclock b/init.d/osclock
new file mode 100755
index 0000000..486990e
--- /dev/null
+++ b/init.d/osclock
@@ -0,0 +1,12 @@
+#!/sbin/openrc-run
+# Copyright (c) 2014 Ralph Sennhauser <sera@igentoo.org>
+# Released under the 2-clause BSD license.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+	provide clock
+}
diff --git a/init.d/s6-svscan b/init.d/s6-svscan
new file mode 100755
index 0000000..f73746c
--- /dev/null
+++ b/init.d/s6-svscan
@@ -0,0 +1,31 @@
+#!/sbin/openrc-run
+# Copyright (C) 2015 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+command=/bin/s6-svscan
+command_args="${RC_SVCDIR}"/s6-scan
+command_background=yes
+pidfile=/var/run/s6-svscan.pid
+
+depend()
+{
+	need localmount
+}
+
+start_pre()
+{
+	einfo "Creating s6 scan directory"
+	checkpath -d -m 0755 "$RC_SVCDIR"/s6-scan
+	return $?
+}
+
+stop_post()
+{
+	ebegin "Stopping any remaining s6 services"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/* 2>/dev/null || true
+	eend $?
+
+	ebegin "Stopping any remaining s6 service loggers"
+	s6-svc -dx "${RC_SVCDIR}"/s6-scan/*/log 2>/dev/null || true
+	eend $?
+}
diff --git a/logrotate.d/._cfg0000_openrc b/logrotate.d/._cfg0000_openrc
new file mode 100644
index 0000000..5e5e64b
--- /dev/null
+++ b/logrotate.d/._cfg0000_openrc
@@ -0,0 +1,4 @@
+/var/log/rc.log {
+	missingok
+	notifempty
+}