etc-gentoo/asterisk/unistim.conf

87 lines
5.5 KiB
Plaintext
Raw Normal View History

;
; chan_unistim configuration file.
;
[general]
port=5000 ; UDP port
;
; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters.
;tos=cs3 ; Sets TOS for signaling packets.
;tos_audio=ef ; Sets TOS for RTP audio packets.
;cos=3 ; Sets 802.1p priority for signaling packets.
;cos_audio=5 ; Sets 802.1p priority for RTP audio packets.
;
;debug=yes ; Enable debug (default no)
;keepalive=120 ; in seconds, default = 120
;public_ip= ; if asterisk is behind a nat, specify your public IP
;autoprovisioning=no ; Allow undeclared phones to register an extension. See README for important
; informations. no (default), yes, tn.
;mohsuggest=default
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
; SIP channel. Defaults to "no". An enabled jitterbuffer will
; be used only if the sending side can create and the receiving
; side can not accept jitter. The SIP channel can accept jitter,
; thus a jitterbuffer on the receive SIP side will be used only
; if it is forced and enabled.
; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a SIP
; channel. Defaults to "no".
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
; resynchronized. Useful to improve the quality of the voice, with
; big jumps in/broken timestamps, usually sent from exotic devices
; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
; channel. Two implementations are currently available - "fixed"
; (with size always equals to jbmaxsize) and "adaptive" (with
; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
;[black] ; name of the device
;device=000ae4012345 ; mac address of the phone
;rtp_port=10000 ; RTP port used by the phone, default = 10000. RTCP = rtp_port+1
;rtp_method=0 ; If you don't have sound, you can try 1, 2 or 3, default = 0
; value 3 works on newer i2004, 1120E and 1140E
;status_method=0 ; If you don't see status text, try 1, default = 0
; value 1 works on 1120E and 1140E
;titledefault=Asterisk ; default = "TimeZone (your time zone)". 12 characters max
;height=3 ; default = 3, the number of display lines the device can show
; For example on a Nortel I2001 or I2002, set this to 1
;maintext0="you can insert" ; default = "Welcome", 24 characters max
;maintext1="a custom text" ; default = the name of the device, 24 characters max
;maintext2="(main page)" ; default = the public IP of the phone, 24 characters max
;dateformat=1 ; 0 = month/day, 1 (default) = day/month
;timeformat=1 ; 0 = 0:00am ; 1 (default) = 0h00, 2 = 0:00
;contrast=8 ; define the contrast of the LCD. From 0 to 15. Default = 8
;country=us ; country (ccTLD) for dial tone frequency. See README, default = us
;ringvolume=2 ; ring volume : 0,1,2,3, can be overrided by Dial(), default = 2
;ringstyle=3 ; ring style : 0 to 7, can be overrided by Dial(), default = 3
;cwvolume=2 ; ring volume : 0,1,2,3, default = 0
;cwstyle=3 ; ring style : 0 to 7, default = 2
;sharpdial=1 ; dial number by pressing #, default = 0
;interdigit_timer=4000 ; timer for automatic dial after several digits of number entered (in ms, 0 is off)
;callhistory=1 ; 0 = disable, 1 = enable call history, default = 1
;callerid="Customer Support" <555-234-5678>
;context=default ; context, default="default"
;mailbox=1234 ; Specify the mailbox number. Used by Message Waiting Indication
;linelabel="Support" ; Softkey label for the next line=> entry, 9 char max.
;extension=none ; Add an extension into the dialplan. Only valid in context specified previously.
; none=don't add (default), ask=prompt user, line=use the line number
;line => 100 ; Any number of lines can be defined in any order with bookmarks
;line => 200 ; After line defined it placed in next available slot
;bookmark=Hans C.@123 ; Use a softkey to dial 123. Name : 9 char max
;bookmark=Mailbox@011@54 ; 54 shows a mailbox icon. See #define FAV_ICON_ for other values (32 to 63)
;bookmark=Test@*@USTM/violet ; Display an icon if violet is connected (dynamic), only for unistim device
;bookmark=4@Pager@54321@51 ; Display a pager icon and dial 54321 when softkey 4 is pressed
;[violet]
;device=006038abcdef
;line => 102