etc-gentoo/asterisk/ccss.conf

206 lines
8.6 KiB
Plaintext
Raw Normal View History

;
; --- Call Completion Supplementary Services ---
;
; For more information about CCSS, see the CCSS user documentation
; https://wiki.asterisk.org/wiki/display/AST/Call+Completion+Supplementary+Services+(CCSS)
;
[general]
; The cc_max_requests option is a global limit on the number of
; CC requests that may be in the Asterisk system at any time.
;
;cc_max_requests = 20
;
; The cc_STATE_devstate variables listed below can be used to change the
; default mapping of the internal state machine tracking the state of
; call completion to an Asterisk Device State value. The acceptable values
; that can be provided are as follows, with a description of what the
; equivalent device BLF that this maps to:
;
; UNKNOWN ; Device is valid but channel didn't know state
; NOT_INUSE ; Device is not used
; INUSE ; Device is in use
; BUSY ; Device is busy
; INVALID ; Device is invalid
; UNAVAILABLE ; Device is unavailable
; RINGING ; Device is ringing
; RINGINUSE ; Device is ringing *and* in use
; ONHOLD ; Device is on hold
;
; These states are used to generate DEVICE_STATE information that can be
; included with Asterisk hints for phones to subscribe to the state information
; or dialplan to check the state using the EXTENSION_STATE() function or
; the DEVICE_STATE() function.
;
; The states are in the format of: "ccss:TECH/ID" so an example of device
; SIP/3000 making a CallCompletionRequest() could be checked by looking at
; DEVICE_STATE(ccss:SIP/3000) or an Asterisk Hint could be generated such as
;
; [hint-context]
; exten => *843000,hint,ccss:SIP/3000
;
; and then accessed with EXTENSION_STATE(*843000@hint-context)
; or subscribed to with a BLF button on a phone.
;
; The available state mapping and default values are:
;
; cc_available_devstate = NOT_INUSE
; cc_offered_devstate = NOT_INUSE
; cc_caller_requested_devstate = NOT_INUSE
; cc_active_devstate = INUSE
; cc_callee_ready_devstate = INUSE
; cc_caller_busy_devstate = ONHOLD
; cc_recalling_devstate = RINGING
; cc_complete_devstate = NOT_INUSE
; cc_failed_devstate = NOT_INUSE
;
;============================================
; PLEASE READ THIS!!!
; The options described below should NOT be
; set in this file. Rather, they should be
; set per-device in a channel driver
; configuration file.
; PLEASE READ THIS!!!
;===========================================
;
;---------------------------------------------------------------------
; Timers
;---------------------------------------------------------------------
;There are three configurable timers for all types of CC: the
;cc_offer_timer, the ccbs_available_timer, and the ccnr_available_timer.
;In addition, when using a generic agent, there is a fourth timer,
;the cc_recall_timer. All timers are configured in seconds, and the
;values shown below are the defaults.
;
;When a caller is offered CCBS or CCNR, the cc_offer_timer will
;be started. If the caller does not request CC before the
;cc_offer_timer expires, then the caller will be unable to request
;CC for this call.
;
;cc_offer_timer = 20
;
;Once a caller has requested CC, then either the ccbs_available_timer
;or the ccnr_available_timer will run, depending on the service
;requested. The reason why there are two separate timers for CCBS
;and CCNR is that it is reasonable to want to have a shorter timeout
;configured for CCBS than for CCNR. If the available timer expires
;before the called party becomes available, then the CC attempt
;will have failed and monitoring of the called party will stop.
;
;ccbs_available_timer = 4800
;ccnr_available_timer = 7200
;
; When using a generic agent, the original caller is called back
; when one of the original called parties becomes available. The
; cc_recall_timer tells Asterisk how long it should let the original
; caller's phone ring before giving up. Please note that this parameter
; only affects operation when using a generic agent.
;
;cc_recall_timer = 20
;---------------------------------------------------------------------
; Policies
;---------------------------------------------------------------------
; Policy settings tell Asterisk how to behave and what sort of
; resources to allocate in order to facilitate CC. There are two
; settings to control the actions Asterisk will take.
;
; The cc_agent_policy describes the behavior that Asterisk will
; take when communicating with the caller during CC. There are
; three possible options.
;
;never: Never offer CC to the caller. Setting the cc_agent_policy
; to this value is the way to disable CC for a call.
;
;generic: A generic CC agent is one which uses no protocol-specific
; mechanisms to offer CC to the caller. Instead, the caller
; requests CC using a dialplan function. Due to internal
; restrictions, you should only use a generic CC agent on
; phones (i.e. not "trunks"). If you are using phones which
; do not support a protocol-specific method of using CC, then
; generic CC agents are what you should use.
;
;native: A native CC agent is one which uses protocol-specific
; signaling to offer CC to the caller and accept CC requests
; from the caller. The supported protocols for native CC
; agents are SIP, ISDN ETSI PTP, ISDN ETSI PTMP, and Q.SIG
;cc_agent_policy=never
;
; The cc_monitor_policy describes the behavior that Asterisk will
; take when communicating with the called party during CC. There
; are four possible options.
;
;never: Analogous to the cc_agent_policy setting. We will never
; attempt to request CC services on this interface.
;
;generic: Analogous to the cc_agent_policy setting. We will monitor
; the called party's progress using protocol-agnostic
; capabilities. Like with generic CC agents, generic CC
; monitors should only be used for phones.
;
;native: Analogous to the cc_agent_policy setting. We will use
; protocol-specific methods to request CC from this interface
; and to monitor the interface for availability.
;
;always: If an interface is set to "always," then we will accept
; protocol-specific CC offers from the caller and use
; a native CC monitor for the remainder of the CC transaction.
; However, if the interface does not offer protocol-specific
; CC, then we will fall back to using a generic CC monitor
; instead. This is a good setting to use for phones for which
; you do not know if they support protocol-specific CC
; methodologies.
;cc_monitor_policy=never
;
;
;---------------------------------------------------------------------
; Limits
;---------------------------------------------------------------------
;
; The use of CC requires Asterisk to potentially use more memory than
; some administrators would like. As such, it is a good idea to limit
; the number of CC requests that can be in the system at a given time.
; The values shown below are the defaults.
;
; The cc_max_agents setting limits the number of outstanding CC
; requests a caller may have at any given time. Please note that due
; to implementation restrictions, this setting is ignored when using
; generic CC agents. Generic CC agents may only have one outstanding
; CC request.
;
;cc_max_agents = 5
;
; The cc_max_monitors setting limits the number of outstanding CC
; requests can be made to a specific interface at a given time.
;
;cc_max_monitors = 5
;
;---------------------------------------------------------------------
; Other
;---------------------------------------------------------------------
;
; When using a generic CC agent, the caller who requested CC will be
; called back when a called party becomes available. When the caller
; answers his phone, the administrator may opt to have a macro run.
; What this macro does is up to the administrator. By default there
; is no callback macro configured.
;
;cc_callback_macro=
;
; Alternatively, the administrator may run a subroutine. By default
; there is no callback subroutine configured. The subroutine should
; be specified in the format: [[context,]exten,]priority
;
;cc_callback_sub=
;
; When using an ISDN phone and a generic CC agent, Asterisk is unable
; to determine the dialstring that should be used when calling back
; the original caller. Furthermore, if you desire to use any dialstring-
; specific options, such as distinctive ring, you must set this
; configuration option. For non-ISDN phones, it is not necessary to
; set this, since Asterisk can determine the dialstring to use since
; it is identical to the name of the calling device. By default, there
; is no cc_agent_dialstring set.
;
;cc_agent_dialstring=