etc-gentoo/jabber/s2s.xml.dist

<!-- s2s configuration -->
<s2s>
  <!-- Our ID on the network (default: s2s) -->
  <id>s2s</id>

  <!-- The process ID file. Comment this out if you don't need to know
       the process ID from outside the process (eg for control scripts) -->
  <pidfile>/var/run/jabber/jabberd2-s2s.pid</pidfile>

  <!-- Router connection configuration -->
  <router>
    <!-- IP/port the router is waiting for connections on -->
    <ip>127.0.0.1</ip>            <!-- default: 127.0.0.1 -->
    <port>5347</port>             <!-- default: 5347 -->

    <!-- Username/password to authenticate as -->
    <user>jabberd</user>          <!-- default: jabberd -->
    <pass>secret</pass>           <!-- default: secret -->

    <!-- The router will only allow one component to be the default
         route (ie the component that receives packets destined for
         unknown hosts). If you want to run more than one s2s instance,
         you need to uncomment this so that s2s does not try to become
         the default route. Note that all outgoing s2s communication
         will go to the component that is the default route. -->
    <!--
    <non-default/>
    -->

    <!-- File containing an SSL certificate and private key to use when
         setting up an encrypted channel with the router. From
         SSL_CTX_use_certificate_chain_file(3): "The certificates must be
         in PEM format and must be sorted starting with the subject's
         certificate (actual client or server certificate), followed
         by intermediate CA certificates if applicable, and ending
         at the highest level (root) CA" (the latter one being optional).
         If this is commented out, or the file can't be read, no attempt
         will be made to establish an encrypted channel with the router. -->
    <!--
    <pemfile>/etc/jabber/server.pem</pemfile>
    -->

    <!-- Router connection retry -->
    <retry>
      <!-- If the connection to the router can't be established at
           startup, we should try again this many times before exiting.
           Use -1 to retry indefinitely. [default: 3] -->
      <init>3</init>

      <!-- If we lost the connection to the router during normal
           operation (ie we've successfully connected to the router in
           the past), we should try to reconnect this many times before
           exiting. Use -1 to retry indefinitely. [default: 3] -->
      <lost>3</lost>

      <!-- Sleep for this many seconds before trying attempting a
           reconnect. [default: 2] -->
      <sleep>2</sleep>
    </retry>
  </router>

  <!-- Log configuration - type is "syslog", "file" or "stdout" -->
  <log type='syslog'>
    <!-- If logging to syslog, this is the log ident -->
    <ident>jabberd/s2s</ident>

    <!-- If logging to syslog, this is the log facility
         (local0 - local7)                        [default: local3] -->
    <facility>local3</facility>

    <!-- if logging to file, this is the filename of the logfile -->
    <!--
    <file>/var/log/jabber/s2s.log</file>
    -->

    <!-- Filename of the debug logfile -->
    <!--
    <debug>/var/log/jabber/debug-${id}.log</debug>
    -->
  </log>

  <!-- Local network configuration -->
  <local>
    <!-- IP and port to listen for incoming s2s connections on
                                           (default: 0.0.0.0, 5269) -->
    <ip>0.0.0.0</ip>
    <port>5269</port>

    <!-- Multihomed machines (with more than one interface and IP address)
         need to specify outgoing S2S connections interface/address.
         If not set, the <ip> section address above is used. -->
    <!--
    <origins>
      <ip>1.2.3.4</ip>
      <ip>fe80::202:b3ff:fe1e:8329</ip>
    </origins>
    -->

    <!-- Secret used to generate dialback keys. If you have more than
         one s2s instance configured, make sure that this is the same on
         all of them. If this is commented out, a random one will be
         generated. -->
    <!--
    <secret>secret</secret>
    -->

    <!-- File containing an SSL certificate and private key to use when setting
         up encrypted s2s connections with other servers (STARTTLS + Dialback).
         From SSL_CTX_use_certificate_chain_file(3): "The certificates must be
         in PEM format and must be sorted starting with the subject's
         certificate (actual client or server certificate), followed
         by intermediate CA certificates if applicable, and ending
         at the highest level (root) CA" (the latter one being optional).
         If this is commented out, or the file can't be read, no attempt will be
         made to establish encrypted connections with other servers. -->
    <!--
    <pemfile>/etc/jabber/server.pem</pemfile>
    -->

    <!-- SSL verify mode - see SSL_CTX_set_verify(3), mode parameter -->
    <!--
    <verify-mode>7</verify-mode>
    -->

    <!-- File containing an optional SSL certificate chain file for SSL
         connections. -->
    <!--
    <cachain>/etc/jabber/cachain.pem</cachain>
    -->

  </local>

  <!-- input/output settings -->
  <io>
    <!-- Maximum number of file descriptors. Note that the number of
         possible connections will be slightly less than this, because
         s2s itself can use some on its own. If the supply of file
         descriptors is exhausted, new incoming connections will be
         denied.

         These connections are mainly consumed when we make a
         connection to an external jabber server, or an external jabber
         server connects to us. If you don't have a lot of users then
         there's probably no need for s2s to establish connections to
         external jabber servers and the default value here is probably
         fine. On the other hand, if you have lots of users with lots
         of remote buddies in their buddylist then s2s will need to have
         lots of open connections with other jabber servers and you may
         need to increase this value.

         Note that this value only affects how many file descriptors
         jabberd is able to handle internally. You may also need to
         tell your operating system to allow jabberd to use more file
         descriptors. On Linux this can be done using ulimit -n or by
         changing the value of /proc/sys/fd/file-max.

         (default: 1024) -->
    <max_fds>1024</max_fds>

    <!-- Rate limiting -->
    <limits>
      <!-- Maximum stanza size - if more than given number of bytes
           are read in one incoming stanza, the stream is closed
	   with policy-violation error.

           Set to 0 to disable.
           Values less than 16384 might not work. -->
      <stanzasize>65535</stanzasize>
    </limits>

    <!-- Enable XEP-0138: Stream Compression -->
    <!--
    <compression/>
    -->

  </io>

  <!-- Timed checks -->
  <check>
    <!-- Interval between checks.

         Checks will be run every n seconds.

         0 disables all checks except DNS expiry.     (default: 60) -->
    <interval>60</interval>

    <!-- Queue expiry and connection timeout.

         While a connection is being established and dialback is in
         progress, packets are queued. If a valid connection has not
         been established within this many seconds, the connection
         process will be aborted and the queued packets will be
         bounced. Timeout checks are made for three phases of
         setting up a route authenticated through dialback:
         1. Connection establishment to exchange of stream headers
         2. Initiating dialback (incoming connections)
         3. Completing dialback (incoming and outgoing)

         If stage 1 connection establishment fails and there are
         alternative hosts for this route that have not failed 
         recently, they will be tried too before finally giving up.

         0 disables queue expiry.                     (default: 60) -->
    <queue>60</queue>

    <!-- Queue retry timeout.

         If the queue is older than this timeout, the connection
         will not be retried even if there are alternative hosts
         that have not failed recently.

         0 disables retry expiry.                    (default: 300) -->
    <retry>300</retry>

    <!-- Idle connection checks.

         Connections that have not sent data for longer than this many
         seconds will be dropped.

         0 disables idle timeouts.                 (default: 86400) -->
    <idle>86400</idle>

    <!-- Keepalives.

         Outgoing connections that have not been used for longer than
         this many seconds will have a single whitespace character sent
         to them. This will force the TCP connection to be closed if
         they have disconnected without us knowing about it.

         0 disables keepalives.                       (default: 0) -->
    <keepalive>0</keepalive>

    <!-- Interval between DNS result/bad host expiry.

         0 disables expiry checks.                 (default: 300) -->
    <dnscache>300</dnscache>
  </check>

  <!-- Statistics -->
  <stats>
    <!-- file containing count of packets that went through -->
    <!--
    <packet>/var/spool/jabber/stats/s2s.packets</packet>
    -->
  </stats>

  <lookup>
     <!-- SRV TCP services will be resolved in the following order. The first
          one that returns something will be used (ie dereferenced via an
          A/AAAA lookup). If no SRV records are found, resolver will
          fallback to a straight A/AAAA lookup. -->

    <!-- xmpp-server is mandated by the XMPP spec -->
    <srv>xmpp-server</srv>

    <!-- traditionally, jabber has been used -->
    <srv>jabber</srv>


    <!-- If this is enabled, the resolver will look up AAAA records as well
         as A records. This is needed if you want s2s to use IPv6.
         Connection attempts will be made to all IPv6 hosts before trying
         IPv4 (see bad host timeout below). -->
    <!--
    <resolve-ipv6/>
    -->

    <!-- Minimum time that DNS lookup results are cached (overrides max below). -->
    <min-ttl>30</min-ttl>

    <!-- Maximum time that DNS lookup results are cached. -->
    <max-ttl>86400</max-ttl>

    <!-- Time /etc/hosts lookup results are cached for (default: 86400). -->
    <etc-hosts-ttl>86400</etc-hosts-ttl>

    <!-- Minimum time to wait before using hosts that we have failed to
         establish a connection to (unless there are no alternatives).
         Do not set this too low - it is required to detect permanent
         problems like broken IPv6 connectivity in order to attempt IPv4.

         0 disables bad host caching.               (default: 3600) -->
    <bad-host-timeout>3600</bad-host-timeout>

    <!-- Disable the DNS cache (negative caching will still be done).
         This is likely to negatively impact performance while saving
         a small amount of memory since multiple DNS requests must
         then be made for every re-connection. -->
    <!--
    <no-cache/>
    -->
  </lookup>

  <!-- If this is enabled, domains which share the same host will re-use
       existing outgoing connections. This is a potential security risk
       as the SSL connection from the first domain will be re-used too. -->
  <out-conn-reuse/>

  <security>
    <!-- Require TLS secured S2S connections -->
    <!--
      <require_tls/>
    -->

    <!--
        Domain whitelisting
    -->
    <!--
    <enable_whitelist/>
    -->

    <!-- Domain whitelisting
         When defined, only whitelisted domains are allowed to connect -->
    <!--
    <whitelist_domain>domain1.tld</whitelist_domain>
    <whitelist_domain>domain2.tld</whitelist_domain>
    <whitelist_domain>other.tld</whitelist_domain>
    -->
  </security>
</s2s>
<!--
  vim: syntax=xml
-->