<local_schemashort_desc="Extra domains to look for DNS-SD services in">
<longdesc>Comma separated list of DNS-SD domains that should be visible in the "network:///" location.</longdesc>
</local_schema>
</entry>
<entryname="display_local">
<local_schemashort_desc="How to display local DNS-SD service">
<longdesc>Possible values are "merged", "separate" and "disabled".</longdesc>
</local_schema>
</entry>
</dir>
<dirname="smb">
<entryname="workgroup">
<local_schemashort_desc="SMB workgroup">
<longdesc>The Windows networking workgroup or domain that the user is part of. In order for a new workgroup to fully take effect the user may need to log out and log back in.</longdesc>
<longdesc>Select the proxy configuration mode. Supported values are "none", "manual", "auto".</longdesc>
</local_schema>
</entry>
</dir>
<dirname="http_proxy">
<entryname="ignore_hosts">
<local_schemashort_desc="Non-proxy hosts">
<longdesc>This key contains a list of hosts which are connected to directly, rather than via the proxy (if it is active). The values can be hostnames, domains (using an initial wildcard like *.foo.com), IP host addresses (both IPv4 and IPv6) and network addresses with a netmask (something like 192.168.0.0/24).</longdesc>
</local_schema>
</entry>
<entryname="authentication_password">
<local_schemashort_desc="HTTP proxy password">
<longdesc>Password to pass as authentication when doing HTTP proxying.</longdesc>
</local_schema>
</entry>
<entryname="authentication_user">
<local_schemashort_desc="HTTP proxy username">
<longdesc>User name to pass as authentication when doing HTTP proxying.</longdesc>
</local_schema>
</entry>
<entryname="use_authentication">
<local_schemashort_desc="Authenticate proxy server connections">
<longdesc>If true, then connections to the proxy server require authentication. The username/password combo is defined by "/system/http_proxy/authentication_user" and "/system/http_proxy/authentication_password".</longdesc>
</local_schema>
</entry>
<entryname="port">
<local_schemashort_desc="HTTP proxy port">
<longdesc>The port on the machine defined by "/system/http_proxy/host" that you proxy through.</longdesc>
</local_schema>
</entry>
<entryname="host">
<local_schemashort_desc="HTTP proxy host name">
<longdesc>The machine name to proxy HTTP through.</longdesc>
</local_schema>
</entry>
<entryname="use_http_proxy">
<local_schemashort_desc="Use HTTP proxy">
<longdesc>Enables the proxy settings when accessing HTTP over the Internet.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="desktop">
<dirname="gnome">
<dirname="interface">
<entryname="show_unicode_menu">
<local_schemashort_desc="Show the 'Unicode Control Character' menu">
<longdesc>Whether the context menus of entries and text views should offer to insert control characters.</longdesc>
</local_schema>
</entry>
<entryname="show_input_method_menu">
<local_schemashort_desc="Show the 'Input Methods' menu">
<longdesc>Whether the context menus of entries and text views should offer to change the input method.</longdesc>
</local_schema>
</entry>
<entryname="menubar_accel">
<local_schemashort_desc="Menubar accelerator">
<longdesc>Keyboard shortcut to open the menu bars.</longdesc>
</local_schema>
</entry>
<entryname="file_chooser_backend">
<local_schemashort_desc="Module for GtkFileChooser">
<longdesc>Module to use as the filesystem model for the GtkFileChooser widget. Possible values are "gio", "gnome-vfs" and "gtk+".</longdesc>
</local_schema>
</entry>
<entryname="status_bar_meter_on_right">
<local_schemashort_desc="Status Bar on Right">
<longdesc>Whether to display a status bar meter on the right.</longdesc>
</local_schema>
</entry>
<entryname="use_custom_font">
<local_schemashort_desc="Use Custom Font">
<longdesc>Whether to use a custom font in gtk+ applications.</longdesc>
</local_schema>
</entry>
<entryname="monospace_font_name">
<local_schemashort_desc="Monospace font">
<longdesc>Name of a monospaced (fixed-width) font for use in locations like terminals.</longdesc>
</local_schema>
</entry>
<entryname="document_font_name">
<local_schemashort_desc="Document font">
<longdesc>Name of the default font used for reading documents.</longdesc>
</local_schema>
</entry>
<entryname="gtk-im-module">
<local_schemashort_desc="GTK IM Module">
<longdesc>Name of the input method module used by GTK+.</longdesc>
</local_schema>
</entry>
<entryname="gtk-im-status-style">
<local_schemashort_desc="GTK IM Status Style">
<longdesc>Name of the GTK+ input method Status Style used by gtk+.</longdesc>
</local_schema>
</entry>
<entryname="gtk-im-preedit-style">
<local_schemashort_desc="GTK IM Preedit Style">
<longdesc>Name of the GTK+ input method Preedit Style used by gtk+.</longdesc>
</local_schema>
</entry>
<entryname="font_name">
<local_schemashort_desc="Default font">
<longdesc>Name of the default font used by gtk+.</longdesc>
</local_schema>
</entry>
<entryname="gtk_key_theme">
<local_schemashort_desc="Gtk+ Theme">
<longdesc>Basename of the default theme used by gtk+.</longdesc>
</local_schema>
</entry>
<entryname="gtk_theme">
<local_schemashort_desc="Gtk+ Theme">
<longdesc>Basename of the default theme used by gtk+.</longdesc>
</local_schema>
</entry>
<entryname="icon_theme">
<local_schemashort_desc="Icon Theme">
<longdesc>Icon theme to use for the panel, nautilus etc.</longdesc>
</local_schema>
</entry>
<entryname="cursor_blink_time">
<local_schemashort_desc="Cursor Blink Time">
<longdesc>Length of the cursor blink cycle, in milliseconds.</longdesc>
</local_schema>
</entry>
<entryname="cursor_blink">
<local_schemashort_desc="Cursor Blink">
<longdesc>Whether the cursor should blink.</longdesc>
</local_schema>
</entry>
<entryname="toolbar_icons_size">
<local_schemashort_desc="Toolbar Icon Size">
<longdesc>Size of icons in toolbars, either "small-toolbar" or "large-toolbar".</longdesc>
</local_schema>
</entry>
<entryname="toolbar_detachable">
<local_schemashort_desc="Toolbar Detachable">
<longdesc>Whether the user can detach toolbars and move them around.</longdesc>
</local_schema>
</entry>
<entryname="menubar_detachable">
<local_schemashort_desc="Menubar Detachable">
<longdesc>Whether the user can detach menubars and move them around.</longdesc>
</local_schema>
</entry>
<entryname="buttons_have_icons">
<local_schemashort_desc="Buttons Have Icons">
<longdesc>Whether buttons may display an icon in addition to the button text.</longdesc>
</local_schema>
</entry>
<entryname="menus_have_icons">
<local_schemashort_desc="Menus Have Icons">
<longdesc>Whether menus may display an icon next to a menu entry.</longdesc>
</local_schema>
</entry>
<entryname="toolbar_style">
<local_schemashort_desc="Toolbar Style">
<longdesc>Toolbar Style. Valid values are "both", "both-horiz", "icons", and "text".</longdesc>
</local_schema>
</entry>
<entryname="can_change_accels">
<local_schemashort_desc="Can Change Accels">
<longdesc>Whether the user can dynamically type a new accelerator when positioned over an active menuitem.</longdesc>
</local_schema>
</entry>
<entryname="menus_have_tearoff">
<local_schemashort_desc="Menus Have Tearoff">
<longdesc>Whether menus should have a tearoff.</longdesc>
</local_schema>
</entry>
<entryname="enable_animations">
<local_schemashort_desc="Enable Animations">
<longdesc>Whether animations should be displayed. Note: This is a global key, it changes the behaviour of the window manager, the panel etc.</longdesc>
</local_schema>
</entry>
<entryname="accessibility">
<local_schemashort_desc="Enable Accessibility">
<longdesc>Whether Applications should have accessibility support.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="background">
<entryname="color_shading_type">
<local_schemashort_desc="Colour Shading Type">
<longdesc>How to shade the background colour. Possible values are "horizontal-gradient", "vertical-gradient", and "solid".</longdesc>
</local_schema>
</entry>
<entryname="secondary_color">
<local_schemashort_desc="Secondary Colour">
<longdesc>Right or Bottom colour when drawing gradients, not used for solid colour.</longdesc>
</local_schema>
</entry>
<entryname="primary_color">
<local_schemashort_desc="Primary Colour">
<longdesc>Left or Top colour when drawing gradients, or the solid colour.</longdesc>
</local_schema>
</entry>
<entryname="picture_opacity">
<local_schemashort_desc="Picture Opacity">
<longdesc>Opacity with which to draw the background picture.</longdesc>
</local_schema>
</entry>
<entryname="picture_filename">
<local_schemashort_desc="Picture Filename">
<longdesc>File to use for the background image.</longdesc>
</local_schema>
</entry>
<entryname="picture_options">
<local_schemashort_desc="Picture Options">
<longdesc>Determines how the image set by wallpaper_filename is rendered. Possible values are "none", "wallpaper", "centered", "scaled", "stretched", "zoom", "spanned".</longdesc>
<longdesc>Have GNOME draw the desktop background.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="thumbnailers">
<entryname="disable_all">
<local_schemashort_desc="Disable all external thumbnailers">
<longdesc>Set to true to disable all external thumbnailer programs, independent on whether they are independently disabled/enabled.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="thumbnail_cache">
<entryname="maximum_size">
<local_schema>
<longdesc>Maximum size of the thumbnail cache, in megabytes. Set to -1 to disable cleaning.</longdesc>
</local_schema>
</entry>
<entryname="maximum_age">
<local_schema>
<longdesc>Maximum age for thumbnails in the cache, in days. Set to -1 to disable cleaning.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="typing_break">
<entryname="enabled">
<local_schemashort_desc="Whether or not keyboard locking is enabled">
<longdesc>Whether or not keyboard locking is enabled.</longdesc>
</local_schema>
</entry>
<entryname="allow_postpone">
<local_schemashort_desc="Allow postponing of breaks">
<longdesc>Whether or not the typing break screen can be postponed.</longdesc>
</local_schema>
</entry>
<entryname="break_time">
<local_schemashort_desc="Break time">
<longdesc>Number of minutes that the typing break should last.</longdesc>
</local_schema>
</entry>
<entryname="type_time">
<local_schemashort_desc="Type time">
<longdesc>Number of minutes of typing time before break mode starts.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="sound">
<entryname="input_feedback_sounds">
<local_schemashort_desc="Input feedback sounds">
<longdesc>Whether to play sounds on input events.</longdesc>
</local_schema>
</entry>
<entryname="theme_name">
<local_schemashort_desc="Sound theme name">
<longdesc>The XDG sound theme to use for event sounds.</longdesc>
</local_schema>
</entry>
<entryname="event_sounds">
<local_schemashort_desc="Sounds for events">
<longdesc>Whether to play sounds on user events.</longdesc>
</local_schema>
</entry>
<entryname="enable_esd">
<local_schemashort_desc="Enable ESD">
<longdesc>Enable sound server startup.</longdesc>
</local_schema>
</entry>
<entryname="default_mixer_tracks">
<local_schemashort_desc="Default mixer tracks">
<longdesc>The default mixer tracks used by the multimedia key bindings.</longdesc>
</local_schema>
</entry>
<entryname="default_mixer_device">
<local_schemashort_desc="Default mixer device">
<longdesc>The default mixer device used by the multimedia key bindings.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="peripherals">
<dirname="keyboard">
<entryname="remember_numlock_state">
<local_schemashort_desc="Remember NumLock state">
<longdesc>When set to true, GNOME will remember the state of the NumLock LED between sessions.</longdesc>
</local_schema>
</entry>
<entryname="bell_custom_file">
<local_schemashort_desc="Keyboard Bell Custom Filename">
<longdesc>File name of the bell sound to be played.</longdesc>
</local_schema>
</entry>
<entryname="bell_mode">
<local_schema>
<longdesc>possible values are "on", "off", and "custom".</longdesc>
</local_schema>
</entry>
</dir>
<dirname="mouse">
<entryname="cursor_size">
<local_schemashort_desc="Cursor size">
<longdesc>Size of the cursor referenced by cursor_theme.</longdesc>
</local_schema>
</entry>
<entryname="cursor_theme">
<local_schemashort_desc="Cursor theme">
<longdesc>Cursor theme name. Used only by Xservers that support Xcursor, such as XFree86 4.3 and later.</longdesc>
</local_schema>
</entry>
<entryname="cursor_font">
<local_schemashort_desc="Cursor font">
<longdesc>Font name of the cursor. If unset, the default font is used. This value is only propagated to the X server start of each session, so changing it mid-session won't have an effect until the next time you log in.</longdesc>
</local_schema>
</entry>
<entryname="locate_pointer">
<local_schemashort_desc="Locate Pointer">
<longdesc>Highlights the current location of the pointer when the Control key is pressed and released.</longdesc>
</local_schema>
</entry>
<entryname="double_click">
<local_schemashort_desc="Double Click Time">
<longdesc>Length of a double click.</longdesc>
</local_schema>
</entry>
<entryname="drag_threshold">
<local_schemashort_desc="Drag Threshold">
<longdesc>Distance before a drag is started.</longdesc>
</local_schema>
</entry>
<entryname="motion_threshold">
<local_schemashort_desc="Motion Threshold">
<longdesc>Distance in pixels the pointer must move before accelerated mouse motion is activated. A value of -1 is the system default.</longdesc>
</local_schema>
</entry>
<entryname="motion_acceleration">
<local_schemashort_desc="Single Click">
<longdesc>Acceleration multiplier for mouse motion. A value of -1 is the system default.</longdesc>
<longdesc>Swap left and right mouse buttons for left-handed mice.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="lockdown">
<entryname="disable_application_handlers">
<local_schemashort_desc="Disable URL and MIME type handlers">
<longdesc>Prevent running any URL or MIME type handler applications.</longdesc>
</local_schema>
</entry>
<entryname="disable_lock_screen">
<local_schemashort_desc="Disable lock screen">
<longdesc>Prevent the user to lock his screen.</longdesc>
</local_schema>
</entry>
<entryname="disable_user_switching">
<local_schemashort_desc="Disable user switching">
<longdesc>Prevent the user from switching to another account while his session is active.</longdesc>
</local_schema>
</entry>
<entryname="disable_print_setup">
<local_schemashort_desc="Disable print setup">
<longdesc>Prevent the user from modifying print settings. For example, this would disable access to all applications'"Print Setup" dialogues.</longdesc>
</local_schema>
</entry>
<entryname="disable_printing">
<local_schemashort_desc="Disable printing">
<longdesc>Prevent the user from printing. For example, this would disable access to all applications'"Print" dialogues.</longdesc>
</local_schema>
</entry>
<entryname="disable_save_to_disk">
<local_schemashort_desc="Disable saving files to disk">
<longdesc>Prevent the user from saving files to disk. For example, this would disable access to all applications'"Save as" dialogues.</longdesc>
</local_schema>
</entry>
<entryname="disable_command_line">
<local_schemashort_desc="Disable command line">
<longdesc>Prevent the user from accessing the terminal or specifying a command line to be executed. For example, this would disable access to the panel's "Run Application" dialogue.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="file-views">
<entryname="icon_theme">
<local_schemashort_desc="File Icon Theme">
<longdesc>Theme used for displaying file icons.</longdesc>
<longdesc>The application to use for viewing files that require a component to view them. The parameter %s will be replaced by the file's URIs, the parameter %c will be replaced by the component IID.</longdesc>
<local_schemashort_desc="Set to TRUE to activate">
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "note://" URLs">
</local_schema>
</entry>
</dir>
<dirname="h323">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "h323" URLs">
<longdesc>The command used to handle "h323" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "h323" URLs">
<longdesc>True if the command specified in the "command" key should handle "h323" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="callto">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "callto" URLs">
<longdesc>The command used to handle "callto" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "callto" URLs">
<longdesc>True if the command specified in the "command" key should handle "callto" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="mailto">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "mailto" URLs">
<longdesc>The command used to handle "mailto" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "mailto" URLs">
<longdesc>True if the command specified in the "command" key should handle "mailto" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="https">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "https" URLs">
<longdesc>The command used to handle "https" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "https" URLs">
<longdesc>True if the command specified in the "command" key should handle "https" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="http">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "http" URLs">
<longdesc>The command used to handle "http" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "http" URLs">
<longdesc>True if the command specified in the "command" key should handle "http" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="man">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "man" URLs">
<longdesc>The command used to handle "man" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "man" URLs">
<longdesc>True if the command specified in the "command" key should handle "man" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="info">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "info" URLs">
<longdesc>The command used to handle "info" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "info" URLs">
<longdesc>True if the command specified in the "command" key should handle "info" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="ghelp">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "ghelp" URLs">
<longdesc>The command used to handle "ghelp" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "ghelp" URLs">
<longdesc>True if the command specified in the "command" key should handle "ghelp" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="trash">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "trash" URLs">
<longdesc>The command used to handle "trash" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "trash" URLs">
<longdesc>True if the command specified in the "command" key should handle "trash" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="ymsgr">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "ymsgr" URLs">
<longdesc>The command used to handle "ymsgr" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "ymsgr" URLs">
<longdesc>True if the command specified in the "command" key should handle "ymsgr" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="xmpp">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "xmpp" URLs">
<longdesc>The command used to handle "xmpp" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "xmpp" URLs">
<longdesc>True if the command specified in the "command" key should handle "xmpp" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="sip">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "sip" URLs">
<longdesc>The command used to handle "sip" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "sip" URLs">
<longdesc>True if the command specified in the "command" key should handle "sip" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="msnim">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "msnim" URLs">
<longdesc>The command used to handle "msnim" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "msnim" URLs">
<longdesc>True if the command specified in the "command" key should handle "msnim" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="irc">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "irc" URLs">
<longdesc>The command used to handle "irc" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "irc" URLs">
<longdesc>True if the command specified in the "command" key should handle "irc" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="icq">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "icq" URLs">
<longdesc>The command used to handle "icq" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "icq" URLs">
<longdesc>True if the command specified in the "command" key should handle "icq" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="gg">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "gg" URLs">
<longdesc>The command used to handle "gg" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "gg" URLs">
<longdesc>True if the command specified in the "command" key should handle "gg" URLs.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="aim">
<entryname="needs_terminal">
<local_schemashort_desc="Run the command in a terminal">
<longdesc>True if the command used to handle this type of URL should be run in a terminal.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="The handler for "aim" URLs">
<longdesc>The command used to handle "aim" URLs, if enabled.</longdesc>
</local_schema>
</entry>
<entryname="enabled">
<local_schemashort_desc="Whether the specified command should handle "aim" URLs">
<longdesc>True if the command specified in the "command" key should handle "aim" URLs.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
</dir>
</dir>
<dirname="apps">
<dirname="tomboy">
<entryname="enable_close_note_on_escape">
<local_schemashort_desc="Enable closing notes with escape.">
<longdesc>If enabled, an opened note can be closed by hitting the escape key.</longdesc>
</local_schema>
</entry>
<entryname="note_rename_behavior">
<local_schemashort_desc="Link Updating Behaviour on Note Rename">
<longdesc>Integer value indicating if there is a preference to always perform a specific link updating behaviour when a note is renamed, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when renaming a note may impact links that exist in other notes. 1 indicates that links should automatically be removed. 2 indicates that link text should be updated to the new note name so that it will continue linking to the renamed note.</longdesc>
</local_schema>
</entry>
<entryname="sync_sshfs_port">
<local_schemashort_desc="SSHFS Synchronisation Server Port">
<longdesc>The port to use when connecting to the synchronisation server via SSH. Set to -1 or less if default SSH port settings should be used instead.</longdesc>
</local_schema>
</entry>
<entryname="sync_sshfs_username">
<local_schemashort_desc="SSHFS Remote Synchronisation User Name">
<longdesc>User name to use when connecting to the synchronisation server via SSH.</longdesc>
</local_schema>
</entry>
<entryname="sync_sshfs_server">
<local_schemashort_desc="SSHFS Synchronisation Server URL">
<longdesc>URL of SSH server containing Tomboy synchronisation directory.</longdesc>
<longdesc>Time (in milliseconds) Tomboy should wait for a response when using FUSE to mount a synchronisation share.</longdesc>
</local_schema>
</entry>
<entryname="search_window_y_pos">
<local_schemashort_desc="Saved vertical position of "Search All Notes" window">
<longdesc>Determines Y coordinate of "Search All Notes" window; stored on Tomboy exit.</longdesc>
</local_schema>
</entry>
<entryname="search_window_x_pos">
<local_schemashort_desc="Saved horizontal position of "Search All Notes" window">
<longdesc>Determines X coordinate of "Search All Notes" window; stored on Tomboy exit.</longdesc>
</local_schema>
</entry>
<entryname="search_window_width">
<local_schemashort_desc="Saved width of "Search All Notes" window">
<longdesc>Determines pixel width of "Search All Notes" window; stored on Tomboy exit.</longdesc>
</local_schema>
</entry>
<entryname="search_window_height">
<local_schemashort_desc="Saved height of "Search All Notes" window">
<longdesc>Determines pixel height of "Search All Notes" window; stored on Tomboy exit.</longdesc>
</local_schema>
</entry>
<entryname="enable_startup_notes">
<local_schemashort_desc="Enable startup notes">
<longdesc>If enabled, all notes that were open when Tomboy quit will automatically be reopened at startup.</longdesc>
</local_schema>
</entry>
<entryname="tray_menu_item_max_length">
<local_schemashort_desc="Maximum note title length to show in tray menu.">
<longdesc>Maximum characters of note title to show in the Tomboy tray or panel applet note menu.</longdesc>
</local_schema>
</entry>
<entryname="menu_pinned_notes">
<local_schemashort_desc="List of pinned notes.">
<longdesc>Whitespace-separated list of note URIs for notes that should always appear in the Tomboy note menu.</longdesc>
</local_schema>
</entry>
<entryname="menu_note_count">
<local_schemashort_desc="Minimum number of notes to show in menu">
<longdesc>Integer determining the minimum number of notes to show in the Tomboy note menu.</longdesc>
</local_schema>
</entry>
<entryname="start_note">
<local_schemashort_desc="Start Here Note">
<longdesc>The note URI of the note that should be considered the "Start Here" note, which is always placed at the bottom of the Tomboy note menu and also accessible by hotkey.</longdesc>
</local_schema>
</entry>
<entryname="enable_tray_icon">
<local_schemashort_desc="Enable Tray Icon">
<longdesc>If true, Tomboy's tray icon will be displayed in the notification area. Disabling this may be useful when another application is providing the functionality of the tray icon.</longdesc>
</local_schema>
</entry>
<entryname="enable_delete_confirm">
<local_schemashort_desc="Enable the Delete Note confirmation dialogue">
<longdesc>If disabled, the "Delete Note" confirmation dialogue will be suppressed.</longdesc>
</local_schema>
</entry>
<entryname="enable_keybindings">
<local_schemashort_desc="Enable global keybindings">
<longdesc>If true, the desktop-global keybindings set in /apps/tomboy/global_keybindings will be enabled, allowing for useful Tomboy actions to be available from any application.</longdesc>
</local_schema>
</entry>
<entryname="custom_font_face">
<local_schemashort_desc="Custom Font Face">
<longdesc>If enable_custom_font is true, the font name set here will be used as the font when displaying notes.</longdesc>
</local_schema>
</entry>
<entryname="enable_custom_font">
<local_schemashort_desc="Enable custom font">
<longdesc>If true, the font name set in custom_font_face will be used as the font when displaying notes. Otherwise the desktop default font will be used.</longdesc>
</local_schema>
</entry>
<entryname="enable_icon_paste">
<local_schemashort_desc="Enable Middle-Click Paste On Icon.">
<longdesc>Enable this option if you want to be able to middle-click the Tomboy icon to paste timestamped content into the Start Here note.</longdesc>
<longdesc>Integer value indicating how frequently to perform a background sync of your notes (when sync is configured). Any value less than 1 indicates that autosync is disabled. The lowest acceptable positive value is 5. Value is in minutes.</longdesc>
<longdesc>Integer value indicating if there is a preference to always perform a specific behaviour when a conflict is detected, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when a conflict occurs, so that they may handle each conflict situation on a case-by-case basis.</longdesc>
</local_schema>
</entry>
<entryname="sync_selected_service_addin">
<local_schemashort_desc="Selected Synchronisation Service Addin">
<longdesc>Unique identifier for the currently configured note synchronisation service addin.</longdesc>
</local_schema>
</entry>
<entryname="sync_local_path">
<local_schemashort_desc="Synchronisation Local Server Path">
<longdesc>Path to the synchronisation server when using the filesystem synchronisation service addin.</longdesc>
<longdesc>Use wdfs option "-ac" to accept SSL certificates without prompting the user.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="sticky_note_importer">
<entryname="sticky_importer_first_run">
<local_schemashort_desc="Sticky Note Importer First Run">
<longdesc>Indicates that the Sticky Note Importer plugin has not been run, so it should run automatically the next time Tomboy starts.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="export_html">
<entryname="export_linked_all">
<local_schemashort_desc="HTML Export All Linked Notes">
<longdesc>The last setting for the 'Include all other linked notes' checkbox in the Export to HTML plugin. This setting is used in conjunction with the 'HTML Export Linked Notes' setting and is used to specify whether all notes (found recursively) should be included during an export to HTML.</longdesc>
<longdesc>Enables/disables the channel list. Disable it if you experience problems when connecting or while playing in your favourite tetrinet server.</longdesc>
<longdesc>Whether the main window should start maximised.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
</dir>
</dir>
<dirname="regexxer">
<entryname="fallback_encoding">
<local_schemashort_desc="Fallback encoding">
<longdesc>Name of the character encoding to use if a file is not readable in either UTF-8 or the codeset specified by the current locale. Try “iconv --list” for a complete list of possible values.</longdesc>
</local_schema>
</entry>
<entryname="toolbar_style">
<local_schemashort_desc="Toolbar style">
<longdesc>The style of the application’s toolbar. Possible values are “icons”, “text”, “both”, and “both-horiz”.</longdesc>
</local_schema>
</entry>
<entryname="current_match_color">
<local_schemashort_desc="Current-match colour">
<longdesc>The background colour used to highlight the currently selected match of the search expression.</longdesc>
</local_schema>
</entry>
<entryname="match_color">
<local_schemashort_desc="Match colour">
<longdesc>The background colour used to highlight matches of the search expression.</longdesc>
</local_schema>
</entry>
<entryname="textview_font">
<local_schemashort_desc="Text view font">
<longdesc>The font used in the file editor.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="window_list_applet">
<dirname="prefs">
<entryname="maximum_size">
<local_schemashort_desc="Maximum window list size">
<longdesc>The use of this key was deprecated in GNOME 2.20. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="minimum_size">
<local_schemashort_desc="Minimum window list size">
<longdesc>The use of this key was deprecated in GNOME 2.20. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="move_unminimized_windows">
<local_schemashort_desc="Move windows to current workspace when unminimised">
<longdesc>If true, then when unminimising a window, move it to the current workspace. Otherwise, switch to the workspace of the window.</longdesc>
</local_schema>
</entry>
<entryname="group_windows">
<local_schemashort_desc="When to group windows">
<longdesc>Decides when to group windows from the same application on the window list. Possible values are "never", "auto" and "always".</longdesc>
</local_schema>
</entry>
<entryname="display_all_workspaces">
<local_schemashort_desc="Show windows from all workspaces">
<longdesc>If true, the window list will show windows from all workspaces. Otherwise it will only display windows from the current workspace.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="workspace_switcher_applet">
<dirname="prefs">
<entryname="num_rows">
<local_schemashort_desc="Rows in workspace switcher">
<longdesc>This key specifies how many rows (for horizontal layout) or columns (for vertical layout) the workspace switcher shows the workspaces in. This key is only relevant if the display_all_workspaces key is true.</longdesc>
</local_schema>
</entry>
<entryname="display_all_workspaces">
<local_schemashort_desc="Display all workspaces">
<longdesc>If true, the workspace switcher will show all workspaces. Otherwise it will only show the current workspace.</longdesc>
<longdesc>If true, the workspaces in the workspace switcher will display the names of the workspaces. Otherwise they will display the windows on the workspace. This setting only works when the window manager is Metacity.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="fish_applet">
<dirname="prefs">
<entryname="rotate">
<local_schemashort_desc="Rotate on vertical panels">
<longdesc>If true, the fish's animation will be displayed rotated on vertical panels.</longdesc>
</local_schema>
</entry>
<entryname="speed">
<local_schemashort_desc="Pause per frame">
<longdesc>This key specifies the number of seconds each frame will be displayed.</longdesc>
</local_schema>
</entry>
<entryname="frames">
<local_schemashort_desc="Frames in fish's animation">
<longdesc>This key specifies the number of frames that will be displayed in the fish's animation.</longdesc>
</local_schema>
</entry>
<entryname="command">
<local_schemashort_desc="Command to execute on click">
<longdesc>This key specifies the command that will be tried to execute when the fish is clicked.</longdesc>
<longdesc>This key specifies the filename of the pixmap which will be used for the animation displayed in the fish applet relative to the pixmap directory.</longdesc>
</local_schema>
</entry>
<entryname="name">
<local_schemashort_desc="The fish's name">
<longdesc>A fish without a name is a pretty dull fish. Bring your fish to life by naming him.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="clock_applet">
<dirname="prefs">
<entryname="speed_unit">
<local_schemashort_desc="Speed unit">
<longdesc>The unit to use when showing wind speed.</longdesc>
</local_schema>
</entry>
<entryname="temperature_unit">
<local_schemashort_desc="Temperature unit">
<longdesc>The unit to use when showing temperatures.</longdesc>
</local_schema>
</entry>
<entryname="cities">
<local_schemashort_desc="List of locations">
<longdesc>A list of locations to display in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="internet_time">
<local_schemashort_desc="Use Internet time">
<longdesc>The use of this key was deprecated in GNOME 2.6 in favour of the 'format' key. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="unix_time">
<local_schemashort_desc="Use UNIX time">
<longdesc>The use of this key was deprecated in GNOME 2.6 in favour of the 'format' key. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="hour_format">
<local_schemashort_desc="Hour format">
<longdesc>The use of this key was deprecated in GNOME 2.6 in favour of the 'format' key. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="expand_locations">
<local_schemashort_desc="Expand list of locations">
<longdesc>If true, expand the list of locations in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="expand_weather">
<local_schemashort_desc="Expand list of weather information">
<longdesc>If true, expand the list of weather information in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="expand_tasks">
<local_schemashort_desc="Expand list of tasks">
<longdesc>If true, expand the list of tasks in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="expand_birthdays">
<local_schemashort_desc="Expand list of birthdays">
<longdesc>If true, expand the list of birthdays in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="expand_appointments">
<local_schemashort_desc="Expand list of appointments">
<longdesc>If true, expand the list of appointments in the calendar window.</longdesc>
</local_schema>
</entry>
<entryname="show_week_numbers">
<local_schemashort_desc="Show week numbers in calendar">
<longdesc>If true, show week numbers in the calendar.</longdesc>
<longdesc>The use of this key was deprecated in GNOME 2.22 with the use of an internal time configuration tool. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="gmt_time">
<local_schemashort_desc="Use UTC">
<longdesc>The use of this key was deprecated in GNOME 2.28 in favour of the use of timezones. The schema is retained for compatibility with older versions.</longdesc>
</local_schema>
</entry>
<entryname="show_temperature">
<local_schemashort_desc="Show temperature in clock">
<longdesc>If true, show the temperature next to the weather icon.</longdesc>
</local_schema>
</entry>
<entryname="show_weather">
<local_schemashort_desc="Show weather in clock">
<longdesc>If true, display a weather icon.</longdesc>
</local_schema>
</entry>
<entryname="show_tooltip">
<local_schemashort_desc="Show date in tooltip">
<longdesc>If true, show date in a tooltip when the pointer is over the clock.</longdesc>
</local_schema>
</entry>
<entryname="show_date">
<local_schemashort_desc="Show date in clock">
<longdesc>If true, display date in the clock, in addition to time.</longdesc>
</local_schema>
</entry>
<entryname="show_seconds">
<local_schemashort_desc="Show time with seconds">
<longdesc>If true, display seconds in time.</longdesc>
</local_schema>
</entry>
<entryname="custom_format">
<local_schemashort_desc="Custom format of the clock">
<longdesc>This key specifies the format used by the clock applet when the format key is set to "custom". You can use conversion specifiers understood by strftime() to obtain a specific format. See the strftime() manual for more information.</longdesc>
</local_schema>
</entry>
<entryname="format">
<local_schemashort_desc="Hour format">
</local_schema>
</entry>
</dir>
</dir>
<dirname="panel">
<dirname="objects">
<entryname="action_type">
<local_schemashort_desc="Action button type">
<longdesc>The action type this button represents. Possible values are "lock", "logout", "run", "search" and "screenshot". This key is only relevant if the object_type key is "action-applet".</longdesc>
</local_schema>
</entry>
<entryname="launcher_location">
<local_schemashort_desc="Launcher location">
<longdesc>The location of the .desktop file describing the launcher. This key is only relevant if the object_type key is "launcher-object".</longdesc>
</local_schema>
</entry>
<entryname="menu_path">
<local_schemashort_desc="Menu content path">
<longdesc>The path from which the menu contents is contructed. This key is only relevant if the use_menu_path key is true and the object_type key is "menu-object".</longdesc>
</local_schema>
</entry>
<entryname="use_menu_path">
<local_schemashort_desc="Use custom path for menu contents">
<longdesc>If true, the menu_path key is used as the path from which the menu contents should be constructed. If false, the menu_path key is ignored. This key is only relevant if the object_type key is "menu-object".</longdesc>
</local_schema>
</entry>
<entryname="custom_icon">
<local_schemashort_desc="Icon used for object's button">
<longdesc>The location of the image file used as the icon for the object's button. This key is only relevant if the object_type key is "drawer-object" or "menu-object" and the use_custom_icon key is true.</longdesc>
</local_schema>
</entry>
<entryname="use_custom_icon">
<local_schemashort_desc="Use custom icon for object's button">
<longdesc>If true, the custom_icon key is used as a custom icon for the button. If false, the custom_icon key is ignored. This key is only relevant if the object_type key is "menu-object" or "drawer-object".</longdesc>
</local_schema>
</entry>
<entryname="tooltip">
<local_schemashort_desc="Tooltip displayed for drawer or menu">
<longdesc>The text to display in a tooltip for this drawer or this menu. This key is only relevant if the object_type key is "drawer-object" or "menu-object".</longdesc>
</local_schema>
</entry>
<entryname="attached_toplevel_id">
<local_schemashort_desc="Panel attached to drawer">
<longdesc>The identifier of the panel attached to this drawer. This key is only relevant if the object_type key is "drawer-object".</longdesc>
</local_schema>
</entry>
<entryname="applet_iid">
<local_schemashort_desc="Applet IID">
</local_schema>
</entry>
<entryname="bonobo_iid">
<local_schemashort_desc="Applet Bonobo IID">
<longdesc>This key is deprecated, following the migration to a new library for applets. The Bonobo implementation ID of the applet — e.g. "OAFIID:GNOME_ClockApplet". This key is only relevant if the object_type key is "bonobo-applet".</longdesc>
</local_schema>
</entry>
<entryname="locked">
<local_schemashort_desc="Lock the object to the panel">
<longdesc>If true, the user may not move the applet without first unlocking the object using the "Unlock" menuitem.</longdesc>
</local_schema>
</entry>
<entryname="panel_right_stick">
<local_schemashort_desc="Interpret position relative to bottom/right edge">
<longdesc>If true, the position of the object is interpreted relative to the right (or bottom if vertical) edge of the panel.</longdesc>
</local_schema>
</entry>
<entryname="position">
<local_schemashort_desc="Object's position on the panel">
<longdesc>The position of this panel object. The position is specified by the number of pixels from the left (or top if vertical) panel edge.</longdesc>
<longdesc>The identifier of the toplevel panel which contains this object.</longdesc>
</local_schema>
</entry>
<entryname="object_type">
<local_schemashort_desc="Panel object type">
</local_schema>
</entry>
</dir>
<dirname="toplevels">
<entryname="animation_speed">
<local_schemashort_desc="Animation speed">
<longdesc>The speed in which panel animations should occur. Possible values are "slow", "medium" and "fast". This key is only relevant if the enable_animations key is true.</longdesc>
</local_schema>
</entry>
<entryname="auto_hide_size">
<local_schemashort_desc="Visible pixels when hidden">
<longdesc>Specifies the number of pixels visible when the panel is automatically hidden into a corner. This key is only relevant if the auto_hide key is true.</longdesc>
</local_schema>
</entry>
<entryname="unhide_delay">
<local_schemashort_desc="Panel autounhide delay">
<longdesc>Specifies the number of milliseconds delay after the pointer enters the panel area before the panel is automatically re-shown. This key is only relevant if the auto_hide key is true.</longdesc>
</local_schema>
</entry>
<entryname="hide_delay">
<local_schemashort_desc="Panel autohide delay">
<longdesc>Specifies the number of milliseconds delay after the pointer leaves the panel area before the panel is automatically hidden. This key is only relevant if the auto_hide key is true.</longdesc>
</local_schema>
</entry>
<entryname="enable_arrows">
<local_schemashort_desc="Enable arrows on hide buttons">
<longdesc>If true, arrows will be placed on the hide buttons. This key is only relevant if the enable_buttons key is true.</longdesc>
</local_schema>
</entry>
<entryname="enable_buttons">
<local_schemashort_desc="Enable hide buttons">
<longdesc>If true, buttons will be placed on each side of the panel which may be used to move the panel to edge of the screen, leaving only a button showing.</longdesc>
</local_schema>
</entry>
<entryname="enable_animations">
<local_schemashort_desc="Enable animations">
<longdesc>If true, hiding and un-hiding of this panel will be animated rather than happening instantly.</longdesc>
</local_schema>
</entry>
<entryname="auto_hide">
<local_schemashort_desc="Automatically hide panel into corner">
<longdesc>If true, the panel is automatically hidden into a corner of the screen when the pointer leaves the panel area. Moving the pointer to that corner again will cause the panel to re-appear.</longdesc>
</local_schema>
</entry>
<entryname="y_centered">
<local_schemashort_desc="Centre panel on y-axis">
<longdesc>If true, the y and y_bottom keys are ignored and the panel is placed at the centre of the y-axis of the screen. If the panel is resized it will remain at that position — i.e. the panel will grow on both sides. If false, the y and y_bottom keys specify the location of the panel.</longdesc>
</local_schema>
</entry>
<entryname="x_centered">
<local_schemashort_desc="Centre panel on x-axis">
<longdesc>If true, the x and x_right keys are ignored and the panel is placed at the centre of the x-axis of the screen. If the panel is resized it will remain at that position — i.e. the panel will grow on both sides. If false, the x and x_right keys specify the location of the panel.</longdesc>
</local_schema>
</entry>
<entryname="y_bottom">
<local_schemashort_desc="Y co-ordinate of panel, starting from the bottom of the screen">
<longdesc>The location of the panel along the y-axis, starting from the bottom of the screen. If set to -1, the value is ignored and the value of the y key is used. If the value is greater than 0, then the value of the y key is ignored. This key is only relevant in un-expanded mode. In expanded mode this key is ignored and the panel is placed at the screen edge specified by the orientation key.</longdesc>
</local_schema>
</entry>
<entryname="x_right">
<local_schemashort_desc="X co-ordinate of panel, starting from the right of the screen">
<longdesc>The location of the panel along the x-axis, starting from the right of the screen. If set to -1, the value is ignored and the value of the x key is used. If the value is greater than 0, then the value of the x key is ignored. This key is only relevant in un-expanded mode. In expanded mode this key is ignored and the panel is placed at the screen edge specified by the orientation key.</longdesc>
</local_schema>
</entry>
<entryname="y">
<local_schemashort_desc="Y co-ordinate of panel">
<longdesc>The location of the panel along the y-axis. This key is only relevant in un-expanded mode. In expanded mode this key is ignored and the panel is placed at the screen edge specified by the orientation key.</longdesc>
</local_schema>
</entry>
<entryname="x">
<local_schemashort_desc="X co-ordinate of panel">
<longdesc>The location of the panel along the x-axis. This key is only relevant in un-expanded mode. In expanded mode this key is ignored and the panel is placed at the screen edge specified by the orientation key.</longdesc>
</local_schema>
</entry>
<entryname="size">
<local_schemashort_desc="Panel size">
<longdesc>The height (width for a vertical panel) of the panel. The panel will determine at runtime a minimum size based on the font size and other indicators. The maximum size is fixed at one quarter of the screen height (or width).</longdesc>
</local_schema>
</entry>
<entryname="orientation">
<local_schemashort_desc="Panel orientation">
<longdesc>The orientation of the panel. Possible values are "top", "bottom", "left", "right". In expanded mode the key specifies which screen edge the panel is on. In un-expanded mode the difference between "top" and "bottom" is less important – both indicate that this is a horizontal panel – but still give a useful hint as to how some panel objects should behave. For example, on a "top" panel a menu button will pop up its menu below the panel, whereas on a "bottom" panel the menu will be popped up above the panel.</longdesc>
</local_schema>
</entry>
<entryname="expand">
<local_schemashort_desc="Expand to occupy entire screen width">
<longdesc>If true, the panel will occupy the entire screen width (height if this is a vertical panel). In this mode the panel can only be placed at a screen edge. If false, the panel will only be large enough to accommodate the applets, launchers and buttons on the panel.</longdesc>
</local_schema>
</entry>
<entryname="monitor">
<local_schemashort_desc="Xinerama monitor where the panel is displayed">
<longdesc>In a Xinerama setup, you may have panels on each individual monitor. This key identifies the current monitor the panel is displayed on.</longdesc>
</local_schema>
</entry>
<entryname="screen">
<local_schemashort_desc="X screen where the panel is displayed">
<longdesc>With a multi-screen setup, you may have panels on each individual screen. This key identifies the current screen the panel is displayed on.</longdesc>
</local_schema>
</entry>
<entryname="name">
<local_schemashort_desc="Name to identify panel">
<longdesc>This is a human readable name which you can use to identify a panel. Its main purpose is to serve as the panel's window title which is useful when navigating between panels.</longdesc>
</local_schema>
</entry>
<dirname="background">
<entryname="rotate">
<local_schemashort_desc="Rotate image on vertical panels">
<longdesc>If true, the background image will be rotated when the panel is oriented vertically.</longdesc>
</local_schema>
</entry>
<entryname="stretch">
<local_schemashort_desc="Stretch image to panel">
<longdesc>If true, the image will be scaled to the panel dimensions. The aspect ratio of the image will not be maintained.</longdesc>
</local_schema>
</entry>
<entryname="fit">
<local_schemashort_desc="Fit image to panel">
<longdesc>If true, the image will be scaled (retaining the aspect ratio of the image) to the panel height (if horizontal).</longdesc>
</local_schema>
</entry>
<entryname="image">
<local_schemashort_desc="Background image">
<longdesc>Specifies the file to be used for the background image. If the image contains an alpha channel it will be composited onto the desktop background image.</longdesc>
<longdesc>Specifies the opacity of the background colour format. If the colour is not completely opaque (a value of less than 65535), the colour will be composited onto the desktop background image.</longdesc>
</local_schema>
</entry>
<entryname="color">
<local_schemashort_desc="Background colour">
<longdesc>Specifies the background colour for the panel in #RGB format.</longdesc>
</local_schema>
</entry>
<entryname="type">
<local_schemashort_desc="Background type">
<longdesc>Which type of background should be used for this panel. Possible values are "gtk" — the default GTK+ widget background will be used, "colour" — the colour key will be used as background colour or "image" — the image specified by the image key will be used as background.</longdesc>
<longdesc>A boolean flag to indicate whether the user's previous configuration in /apps/panel/profiles/default has been copied to the new location in /apps/panel.</longdesc>
</local_schema>
</entry>
<entryname="object_id_list">
<local_schemashort_desc="Panel object ID list">
<longdesc>A list of panel object IDs. Each ID identifies an individual panel object (e.g. a launcher, action button or menu button/bar). The settings for each of these objects are stored in /apps/panel/objects/$(id).</longdesc>
</local_schema>
</entry>
<entryname="applet_id_list">
<local_schemashort_desc="Panel applet ID list">
<longdesc>A list of panel applet IDs. Each ID identifies an individual panel applet. The settings for each of these applets are stored in /apps/panel/applets/$(id).</longdesc>
</local_schema>
</entry>
<entryname="toplevel_id_list">
<local_schemashort_desc="Panel ID list">
<longdesc>A list of panel IDs. Each ID identifies an individual toplevel panel. The settings for each of these panels are stored in /apps/panel/toplevels/$(id).</longdesc>
</local_schema>
</entry>
<entryname="enable_autocompletion">
<local_schemashort_desc="Enable autocompletion in "Run Application" dialogue">
<longdesc>If true, autocompletion in the "Run Application" dialogue is made available.</longdesc>
</local_schema>
</entry>
<entryname="show_program_list">
<local_schemashort_desc="Expand program list in "Run Application" dialogue">
<longdesc>If true, the "Known Applications" listing in the "Run Application" dialogue is expanded when the dialogue is opened. This key is only relevant if the enable_program_list key is true.</longdesc>
</local_schema>
</entry>
<entryname="enable_program_list">
<local_schemashort_desc="Enable program list in "Run Application" dialogue">
<longdesc>If true, the "Known Applications" listing in the "Run Application" dialogue is made available. Whether or not the listing is expanded when the dialogue is shown is controlled by the show_program_list key.</longdesc>
</local_schema>
</entry>
</dir>
<dirname="global">
<entryname="disable_force_quit">
<local_schemashort_desc="Disable Force Quit">
<longdesc>If true, the panel will not allow a user to force an application to quit by removing access to the force quit button.</longdesc>
</local_schema>
</entry>
<entryname="disable_log_out">
<local_schemashort_desc="Disable Logging Out">
<longdesc>If true, the panel will not allow a user to log out, by removing access to the log out menu entries.</longdesc>
</local_schema>
</entry>
<entryname="disable_lock_screen">
<local_schemashort_desc="Deprecated">
<longdesc>This key is deprecated as it cannot be used to implement proper lockdown. The /desktop/gnome/lockdown/disable_lock_screen key should be used instead.</longdesc>
</local_schema>
</entry>
<entryname="disabled_applets">
<local_schemashort_desc="Applet IIDs to disable from loading">
<longdesc>A list of applet IIDs that the panel will ignore. This way you can disable certain applets from loading or showing up in the menu. For example to disable the mini-commander applet add 'OAFIID:GNOME_MiniCommanderApplet' to this list. The panel must be restarted for this to take effect.</longdesc>
<longdesc>If true, the panel will not allow any changes to the configuration of the panel. Individual applets may need to be locked down separately however. The panel must be restarted for this to take effect.</longdesc>
</local_schema>
</entry>
<entryname="highlight_launchers_on_mouseover">
<local_schemashort_desc="Highlight launchers on mouseover">
<longdesc>If true, a launcher is highlighted when the user moves the pointer over it.</longdesc>
</local_schema>
</entry>
<entryname="confirm_panel_remove">
<local_schemashort_desc="Confirm panel removal">
<longdesc>If true, a dialogue is shown asking for confirmation if the user wants to remove a panel.</longdesc>
</local_schema>
</entry>
<entryname="drawer_autoclose">
<local_schemashort_desc="Autoclose drawer">
<longdesc>If true, a drawer will automatically be closed when the user clicks a launcher in it.</longdesc>
</local_schema>
</entry>
<entryname="window_screenshot_key">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="screenshot_key">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="run_key">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="menu_key">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="enable_key_bindings">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="panel_hide_delay">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="panel_animation_speed">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="panel_show_delay">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="panel_minimized_size">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="enable_animations">
<local_schemashort_desc="Enable animations">
</local_schema>
</entry>
<entryname="keep_menus_in_memory">
<local_schemashort_desc="Deprecated">
</local_schema>
</entry>
<entryname="tooltips_enabled">
<local_schemashort_desc="Enable tooltips">
<longdesc>If true, tooltips are shown for objects in panels.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dirname="gweather">
<dirname="prefs">
<entryname="radar">
<local_schemashort_desc="URI for the radar map">
<longdesc>The custom URI from which to retrieve a radar map.</longdesc>
</local_schema>
</entry>
<entryname="use_custom_radar_url">
<local_schemashort_desc="Use custom URI for the radar map">
<longdesc>If true, then retrieve a radar map from a location specified by the "radar" key.</longdesc>
