hasufell/bachelorthesis
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c05745a3de
bachelorthesis/RFCs/rfc1522.txt
Julian Ospald c05745a3de
First commit
2016-06-15 14:40:15 +02:00

563 lines
22 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Network Working Group K. Moore
Request for Comments: 1522 University of Tennessee
Obsoletes: 1342 September 1993
Category: Standards Track
MIME (Multipurpose Internet Mail Extensions) Part Two:
Message Header Extensions for Non-ASCII Text
Status of this Memo
This RFC specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" for the standardization state and status
of this protocol. Distribution of this memo is unlimited.
Abstract
This memo describes an extension to the message format defined in RFC
1521 [1], to allow the representation of character sets other than
ASCII in RFC 822 (STD 11) message headers. The extensions described
were designed to be highly compatible with existing Internet mail
handling software, and to be easily implemented in mail readers that
support RFC 1521.
1. Introduction
RFC 1521 describes a mechanism for denoting textual body parts which
are coded in various character sets, as well as methods for encoding
such body parts as sequences of printable ASCII characters. This
memo describes similar techniques to allow the encoding of non-ASCII
text in various portions of a RFC 822 [2] message header, in a manner
which is unlikely to confuse existing message handling software.
Like the encoding techniques described in RFC 1521, the techniques
outlined here were designed to allow the use of non-ASCII characters
in message headers in a way which is unlikely to be disturbed by the
quirks of existing Internet mail handling programs. In particular,
some mail relaying programs are known to (a) delete some message
header fields while retaining others, (b) rearrange the order of
addresses in To or Cc fields, (c) rearrange the (vertical) order of
header fields, and/or (d) "wrap" message headers at different places
than those in the original message. In addition, some mail reading
programs are known to have difficulty correctly parsing message
headers which, while legal according to RFC 822, make use of
backslash-quoting to "hide" special characters such as "<", ",", or
":", or which exploit other infrequently-used features of that
Moore [Page 1]
RFC 1522 MIME Part Two September 1993
specification.
While it is unfortunate that these programs do not correctly
interpret RFC 822 headers, to "break" these programs would cause
severe operational problems for the Internet mail system. The
extensions described in this memo therefore do not rely on little-
used features of RFC 822.
Instead, certain sequences of "ordinary" printable ASCII characters
(known as "encoded-words") are reserved for use as encoded data. The
syntax of encoded-words is such that they are unlikely to
"accidentally" appear as normal text in message headers.
Furthermore, the characters used in encoded-words are restricted to
those which do not have special meanings in the context in which the
encoded-word appears.
Generally, an "encoded-word" is a sequence of printable ASCII
characters that begins with "=?", ends with "?=", and has two "?"s in
between. It specifies a character set and an encoding method, and
also includes the original text encoded as graphic ASCII characters,
according to the rules for that encoding method.
A mail composer that implements this specification will provide a
means of inputting non-ASCII text in header fields, but will
translate these fields (or appropriate portions of these fields) into
encoded-words before inserting them into the message header.
A mail reader that implements this specification will recognize
encoded-words when they appear in certain portions of the message
header. Instead of displaying the encoded-word "as is", it will
reverse the encoding and display the original text in the designated
character set.
NOTES
This memo relies heavily on notation and terms defined STD 11, RFC
822 and RFC 1521. In particular, the syntax for the ABNF used in
this memo is defined in STD 11, RFC 822, as well as many of the
terms used in the grammar for the header extensions defined here.
Successful implementation of this protocol extension requires
careful attention to the details of both STD 11, RFC 822 and RFC
1521.
When the term "ASCII" appears in this memo, it refers to the "7-
Bit American Standard Code for Information Interchange", ANSI
X3.4-1986. The MIME charset name for this character set is "US-
ASCII". When not specifically referring to the MIME charset name,
this document uses the term "ASCII", both for brevity and for
Moore [Page 2]
RFC 1522 MIME Part Two September 1993
consistency with STD 11, RFC 822. However, implementors are
warned that the character set name must be spelled "US-ASCII" in
MIME message and body part headers.
2. Syntax of encoded-words
An "encoded-word" is defined by the following ABNF grammar. The
notation of RFC 822 is used, with the exception that white space
characters MAY NOT appear between components of an encoded-word.
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token ; see section 3
encoding = token ; see section 4
token = 1*<Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = 1*<Any printable ASCII character other
than "?" or SPACE>
; (but see "Use of encoded-words in message
; headers", section 5)
Both "encoding" and "charset" names are case-independent. Thus the
charset name "ISO-8859-1" is equivalent to "iso-8859-1", and the
encoding named "Q" may be spelled either "Q" or "q".
An encoded-word may not be more than 75 characters long, including
charset, encoding, encoded-text, and delimiters. If it is desirable
to encode more text than will fit in an encoded-word of 75
characters, multiple encoded-words (separated by CRLF SPACE) may be
used.
While there is no limit to the length of a multiple-line header
field, each line of a header field that contains one or more
encoded-words is limited to 76 characters.
The length restrictions are included not only to ease
interoperability through internetwork mail gateways, but also to
impose a limit on the amount of lookahead a header parser must employ
(while looking for a final ?= delimiter) before it can decide whether
a token is an encoded-word or something else.
The characters which may appear in encoded-text are further
restricted by the rules in section 5.
Moore [Page 3]
RFC 1522 MIME Part Two September 1993
3. Character sets
The "charset" portion of an encoded-word specifies the character set
associated with the unencoded text. A charset can be any of the
character set names allowed in an RFC 1521 "charset" parameter of a
"text/plain" body part, or any character set name registered with
IANA for use with the MIME text/plain content-type [3]. (See section
7.1.1 of RFC 1521 for a list of charsets defined in that document).
Some character sets use code-switching techniques to switch between
"ASCII mode" and other modes. If unencoded text in an encoded-word
contains control codes to switch out of ASCII mode, it must also
contain additional control codes such that ASCII mode is again
selected at the end of the encoded-word. (This rule applies
separately to each encoded-word, including adjacent encoded-words
within a single header field.)
When there is a possibility of using more than one character set to
represent the text in an encoded-word, and in the absence of private
agreements between sender and recipients of a message, it is
recommended that members of the ISO-8859-* series be used in
preference to other character sets.
4. Encodings
Initially, the legal values for "encoding" are "Q" and "B". These
encodings are described below. The "Q" encoding is recommended for
use when most of the characters to be encoded are in the ASCII
character set; otherwise, the "B" encoding should be used.
Nevertheless, a mail reader which claims to recognize encoded-words
MUST be able to accept either encoding for any character set which it
supports.
Only a subset of the printable ASCII characters may be used in
encoded-text. Space and tab characters are not allowed, so that the
beginning and end of an encoded-word are obvious. The "?" character
is used within an encoded-word to separate the various portions of
the encoded-word from one another, and thus cannot appear in the
encoded-text portion. Other characters are also illegal in certain
contexts. For example, an encoded-word in a "phrase" preceding an
address in a From header field may not contain any of the "specials"
defined in RFC 822. Finally, certain other characters are disallowed
in some contexts, to ensure reliability for messages that pass
through internetwork mail gateways.
The "B" encoding automatically meets these requirements. The "Q"
encoding allows a wide range of printable characters to be used in
non-critical locations in the message header (e.g., Subject), with
Moore [Page 4]
RFC 1522 MIME Part Two September 1993
fewer characters available for use in other locations.
4.1. The "B" encoding
The "B" encoding is identical to the "BASE64" encoding defined by RFC
1521.
4.2. The "Q" encoding
The "Q" encoding is similar to the "Quoted-Printable" content-
transfer-encoding defined in RFC 1521. It is designed to allow text
containing mostly ASCII characters to be decipherable on an ASCII
terminal without decoding.
(1) Any 8-bit value may be represented by a "=" followed by two
hexadecimal digits. For example, if the character set in use
were ISO-8859-1, the "=" character would thus be encoded as
"=3D", and a SPACE by "=20". (Upper case should be used for
hexadecimal digits "A" through "F".)
(2) The 8-bit hexadecimal value 20 (e.g., ISO-8859-1 SPACE) may be
represented as "_" (underscore, ASCII 95.). (This character may
not pass through some internetwork mail gateways, but its use
will greatly enhance readability of "Q" encoded data with mail
readers that do not support this encoding.) Note that the "_"
always represents hexadecimal 20, even if the SPACE character
occupies a different code position in the character set in use.
(3) 8-bit values which correspond to printable ASCII characters other
than "=", "?", "_" (underscore), and SPACE may be represented as
those characters. (But see section 5 for restrictions.)
5. Use of encoded-words in message headers
An encoded-word may appear in a message header or body part header
according to the following rules:
(1) An encoded-word may replace a "text" token (as defined by RFC
822) in any Subject or Comments header field, any extension
message header field, or any RFC 1521 body part field for which
the field body is defined as "*text". An encoded-word may also
appear in any user-defined ("X-") message or body part header
field.
Ordinary ASCII text and encoded-words may appear together in the
same header field. However, an encoded-word that appears in a
header field defined as "*text" MUST be separated from any
adjacent encoded-word or "text" by linear-white-space.
Moore [Page 5]
RFC 1522 MIME Part Two September 1993
(2) An encoded-word may appear within a comment delimited by "(" and
")", i.e., wherever a "ctext" is allowed. More precisely, the
RFC 822 ABNF definition for "comment" is amended as follows:
comment = "(" *(ctext / quoted-pair / comment / encoded-word) ")"
A "Q"-encoded encoded-word which appears in a comment MUST NOT
contain the characters "(", ")" or " encoded-word that appears in
a "comment" MUST be separated from any adjacent encoded-word or
"ctext" by linear-white-space.
(3) As a replacement for a "word" entity within a "phrase", for
example, one that precedes an address in a From, To, or Cc
header. The ABNF definition for phrase from RFC 822 thus
becomes:
phrase = 1*(encoded-word / word)
In this case the set of characters that may be used in a "Q"-
encoded encoded-word is restricted to: <upper and lower case
ASCII letters, decimal digits, "!", "*", "+", "-", "/", "=", and
"_" (underscore, ASCII 95.)>. An encoded-word that appears
within a "phrase" MUST be separated from any adjacent "word",
"text" or "special" by linear-white-space.
These are the ONLY locations where an encoded-word may appear. In
particular, an encoded-word MUST NOT appear in any portion of an
"addr-spec". In addition, an encoded-word MUST NOT be used in a
Received header field.
Each encoded-word MUST encode an integral number of octets. The
encoded-text in each encoded-word must be well-formed according to
the encoding specified; the encoded-text may not be continued in the
next encoded-word. (For example, "=?charset?Q?=?= =?charset?Q?AB?="
would be illegal, because the two hex digits "AB" must follow the "="
in the same encoded-word.)
Each encoded-word MUST represent an integral number of characters. A
multi-octet character may not be split across adjacent encoded-words.
Only printable and white space character data should be encoded using
this scheme. However, since these encoding schemes allow the
encoding of arbitrary octet values, mail readers that implement this
decoding should also ensure that display of the decoded data on the
recipient's terminal will not cause unwanted side-effects.
Use of these methods to encode non-textual data (e.g., pictures or
sounds) is not defined by this memo. Use of encoded-words to
Moore [Page 6]
RFC 1522 MIME Part Two September 1993
represent strings of purely ASCII characters is allowed, but
discouraged. In rare cases it may be necessary to encode ordinary
text that looks like an encoded-word.
6. Support of encoded-words by mail readers
6.1. Recognition of encoded-words in message headers
A mail reader must parse the message and body part headers according
to the rules in RFC 822 to correctly recognize encoded-words.
Encoded-words are to be recognized as follows:
(1) Any message or body part header field defined as "*text", or any
user-defined header field, should be parsed as follows: Beginning
at the start of the field-body and immediately following each
occurrence of linear-white-space, each sequence of up to 75
printable characters (not containing any linear-white-space)
should be examined to see if it is an encoded-word according to
the syntax rules in section 2. Any other sequence of printable
characters should be treated as ordinary ASCII text.
(2) Any header field not defined as "*text" should be parsed
according to the syntax rules for that header field. However,
any "word" that appears within a "phrase" should be treated as an
encoded-word if it meets the syntax rules in section 2.
Otherwise it should be treated as an ordinary "word".
(3) Within a "comment", any sequence of up to 75 printable characters
(not containing linear-white-space), that meets the syntax rules
in section 2, should be treated as an encoded-word. Otherwise it
should be treated as normal comment text.
6.2. Display of encoded-words
Any encoded-words so recognized are decoded, and if possible, the
resulting unencoded text is displayed in the original character set.
When displaying a particular header field that contains multiple
encoded-words, any linear-white-space that separates a pair of
adjacent encoded-words is ignored. (This is to allow the use of
multiple encoded-words to represent long strings of unencoded text,
without having to separate encoded-words where spaces occur in the
unencoded text.)
In the event other encodings are defined in the future, and the mail
reader does not support the encoding used, it may either (a) display
the encoded-word as ordinary text, or (b) substitute an appropriate
Moore [Page 7]
RFC 1522 MIME Part Two September 1993
message indicating that the text could not be decoded.
If the mail reader does not support the character set used, it may
(a) display the encoded-word as ordinary text (i.e., as it appears in
the header), (b) make a "best effort" to display using such
characters as are available, or (c) substitute an appropriate message
indicating that the decoded text could not be displayed.
If the character set being used employs code-switching techniques,
display of the encoded text implicitly begins in "ASCII mode". In
addition, the mail reader must ensure that the output device is once
again in "ASCII mode" after the encoded-word is displayed.
6.3. Mail reader handling of incorrectly formed encoded-words
It is possible that an encoded-word that is legal according to the
syntax defined in section 2, is incorrectly formed according to the
rules for the encoding being used. For example:
(1) An encoded-word which contains characters which are not legal for
a particular encoding (for example, a '-' in the "B" encoding),
is incorrectly formed.
(2) Any encoded-word which encodes a non-integral number of
characters or octets is incorrectly formed.
A mail reader need not attempt to display the text associated with an
encoded-word that is incorrectly formed. However, a mail reader MUST
NOT prevent the display or handling of a message because an encoded-
word is incorrectly formed.
7. Conformance
A mail composing program claiming compliance with this specification
MUST ensure that any string of non-white-space printable ASCII
characters within a "*text" or "*ctext" that begins with "=?" and
ends with "?=" be a valid encoded-word. ("begins" means: at the
start of the field-body or immediately following linear-white-space;
"ends" means: at the end of the field-body or immediately preceding
linear-white-space.) In addition, any "word" within a "phrase" that
begins with "=?" and ends with "?=" must be a valid encoded-word.
A mail reading program claiming compliance with this specification
must be able to distinguish encoded-words from "text", "ctext", or
"word"s, according to the rules in section 6, anytime they appear in
appropriate places in message headers. It must support both the "B"
and "Q" encodings for any character set which it supports. The
program must be able to display the unencoded text if the character
Moore [Page 8]
RFC 1522 MIME Part Two September 1993
set is "US-ASCII". For the ISO-8859-* character sets, the mail
reading program must at least be able to display the characters which
are also in the ASCII set.
8. Examples
From: =?US-ASCII?Q?Keith_Moore?= <moore@cs.utk.edu>
To: =?ISO-8859-1?Q?Keld_J=F8rn_Simonsen?= <keld@dkuug.dk>
CC: =?ISO-8859-1?Q?Andr=E9_?= Pirard <PIRARD@vm1.ulg.ac.be>
Subject: =?ISO-8859-1?B?SWYgeW91IGNhbiByZWFkIHRoaXMgeW8=?=
=?ISO-8859-2?B?dSB1bmRlcnN0YW5kIHRoZSBleGFtcGxlLg==?=
From: =?ISO-8859-1?Q?Olle_J=E4rnefors?= <ojarnef@admin.kth.se>
To: ietf-822@dimacs.rutgers.edu, ojarnef@admin.kth.se
Subject: Time for ISO 10646?
To: Dave Crocker <dcrocker@mordor.stanford.edu>
Cc: ietf-822@dimacs.rutgers.edu, paf@comsol.se
From: =?ISO-8859-1?Q?Patrik_F=E4ltstr=F6m?= <paf@nada.kth.se>
Subject: Re: RFC-HDR care and feeding
From: Nathaniel Borenstein <nsb@thumper.bellcore.com>
(=?iso-8859-8?b?7eXs+SDv4SDp7Oj08A==?=)
To: Greg Vaudreuil <gvaudre@NRI.Reston.VA.US>, Ned Freed
<ned@innosoft.com>, Keith Moore <moore@cs.utk.edu>
Subject: Test of new header generator
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-1
9. References
[1] Borenstein N., and N. Freed, "MIME (Multipurpose Internet Mail
Extensions) Part One: Mechanisms for Specifying and Describing
the Format of Internet Message Bodies", RFC 1521, Bellcore,
Innosoft, September 1993.
[2] Crocker, D., "Standard for the Format of ARPA Internet Text
Messages", STD 11, RFC 822, UDEL, August 1982.
[3] Reynolds, J., and J. Postel, "Assigned Numbers", STD 2,
RFC 1340, USC/Information Sciences Institute, July 1992.
Moore [Page 9]
RFC 1522 MIME Part Two September 1993
10. Security Considerations
Security issues are not discussed in this memo.
11. Author's Address
Keith Moore
University of Tennessee
107 Ayres Hall
Knoxville TN 37996-1301
EMail: moore@cs.utk.edu
Moore [Page 10]
Reference in New Issue View Git Blame Copy Permalink