The real fix was not using absolute paths anymore (so not expanding with the `:p` option). The regex was correct and should at least include the `^` character to make sure the string starts with the given path/filename and not references the path/filename in some error description.
* Vim scripts shouldn't have hyphens
Especially not ones that will be autoloaded. You can't have a hyphen in
a function name, so autoloading functions based on filename will fail.
* Add g:haskell_stack_build_options, default: --fast
If we're going to use the --fast option, we may as well go the whole 9
yards and let the user configure the 'stack build' flags.
* Create documentation for stack-build options
* Add stack-build linter for Haskell
The stack-build linter works better than the other two linters when
you're working with an entire Haskell project. It builds the project
entirely and reports any errors.
The other two Haskell GHC linters only work on single files, which can
result in spurious errors (for example, not being able to find imports).
* Document all available Haskell linters
* Split GHC checkers into separate files
* Use rubocop's JSON output format (resolves#339)
Rubocop's emacs formatter seems to have changed format in some
not-so-ancient version. The JSON formatter should provide a more stable
interface than parsing lines with a regex.
The JSON formatter was introduced in mid-2013, so it should be safe to
assume available in any reasonably-modern environment. The oldest
currently-supported version of ruby (according to ruby-lang.org) was
not supported by rubocop until 2014.
* Rubocop: Use global function for GetType
* Rubocop: Use scope prefix in GetType
* Rubocop: Update command_callback test
* Rubocop: add end_col to Handle
* Use different reporter to support older versions of jscs
* Add test and make more consistent with other code
* Add documentation for jscs
* Add more test coverage
* Add documentation for hadolint (doc/ale-hadolint.txt)
* Allow `hadolint` linter to run via docker image
These changes enable the `hadolint` linter to run via the author's
docker image, if present. Three modes are supported:
* never use docker;
* always use docker; and
* use docker as a failback.
* Adds an option to pass additional arguments to the verilog/verilator linter
The new otion is g:ale_verilog_verilator_options
+ doc
* Spell check verilog linter doc file
* Add entries to the verilog linters in the doc table of content
* Vader test for verilog/verilator linter args option verilog_verilator_options
* Improve elm linter
Some types of errors do not return nice JSON.
Show them on the first line instead of showing nothing.
* Remove unnecessary properties from elm linter
* Add a vader test for elm-make linter
* Test non-JSON elm-make errors are shown
* Add column number to perlcritic linting output
This returns the column number of the perlcritic error so that ale can
show the column in addition to the line where perlcritic found an error.
* Add perlcritic configuration for rule names
This adds a configuration setting so that the name of the perlcritic
rule is shown [Rule::Name] after the error message.
This is useful to lookup the rule failure.
* Add a vader test for perlcritic#GetCommand
* Add ktlint support (without formatting) for kotlin filetype
* Fix code style and refactor to use ALE utility functions (GetMatches)
* Remove options for configuration file
* Refactor: Rename exec variable and use ale#Set for variable configuration
"-X Disables all warnings regardless of use warnings or $^W". See
"perldoc perlrun" or http://perldoc.perl.org/perlrun.html
With the current defaults, warnings are squashed. For example:
$ perl -X -Mwarnings -c -e'BEGIN { 42 + undef }'
-e syntax OK
$ perl -Mwarnings -c -e'BEGIN { 42 + undef }'
Use of uninitialized value in addition (+) at -e line 1.
-e syntax OK
So, it's not clear from the current defaults whether Ale wants to remove
warnings or enable them. As it stands, it's trying to do both and the
disabling appears to win.
This commit enables warnings by default.
* Improve performance when using gometalinter
Before this change when I opened a big project that had 6000+ warnings/errors it took ages to get the actual warnings/errors and it caused my CPU to be busy for quite some time. The call to gometalinter alone took about 24 seconds, but after that vim was struggling as well.
After this change the gometalinter call just takes 2 seconds and nothing noticable happens with the CPU and/or vim.
* Removed obsolete test
This logic is no longer done by the `ale` plugin, but by `gometalinter` itself.
* Initial attempt at an rpmlint linter.
* Add some basic documentation.
* Play with indentation in the test file.
* Another attempt to fix the rpmlint test.
* Hopefully this does it.
Linter is disabled by default (see g:ale_go_gometalinter_enabled) as it
conflicts with a number of established ALE linters (golint, govet,
gosimple, staticcheck, etc).
* Added ruby mri linter
* Added to the list of supported linters
* Async and now with 4 spaces
* Vader tests for ruby
* Match style choices
* Vader test for the Ruby handler now works and passes
* Adds options to foodcritic linter
Adds a way to pass command line options to the foodcritic command and
documentation about it.
* Creates a simple test for foodcritic command callback
This test simply runs the GetCommand function for the foodcritic linter
and feeds it with some test variables to assert the command line is
being created/escaped correctly.
* Makes foodcritic linter use a command callback
Following review comments, changes the foodcritic linter to use a
`GetCommand` callback for the `command_callback` linter option.
Makes sure that `~` are escaped: flags on foodcritic command line are
negated by adding a `~` in front of the specific cop name:
```
foodcritic -t ~FC011
```
But the way the commands are executed cause foodcritic to fail (since
tilde is recognized as home directory).
* Fixes the doc to include new variables
* Remove 'col' from linters where it is hardcoded to 1
When 'col' is 1, the first column will get highlighted for no reason. It
should be 0 (which is the default).
In the scalac linter there was also a check about the outcome of
`stridx`. It would set l:col to 0 if it was -1, and then it uses
`'col': l:col + 1` to convert the outcome of `stridx` to the actual
column number. This will make 'col' equals 1 when there is no match. We
can remove the check because `-1 + 1 = 0`.
* Remove outdated comments about vcol
vcol was added as a default, and the loclists that follow these comments
do not contain 'vcol' anymore
* Fix problems with nim check
- Multi file errors are not shown in the same buffer
- Fixes parsing of error type that contain ':'
* Remove redundant fnameescape
In particular, if we're working with a leex (.xrl) or yecc (.yrl) source
file, erlc would otherwise generate the corresponding .erl file in the
current directory (often the project root), which is generally not what
we want.
Unconditionally writing erlc output to a temporary directory also
matches Flycheck's behavior.
* PHP: Fix column matching for unexpected single quotes
Unexpected single quotes resulted in an empty match, because PHP
surrounds the errors with quotes, and we check for the next quote to be
the ending delimiter.
For example: an unexpected string 'foo' would be presented as
`unexpected ''foo''`, and then the match would be `''`. The inner part
of that match is an empty string.
This adds a check for the keyword "expecting". Any quote after
"expecting" won't be matched, so we can use greedy matching instead of
non-greedy.
* PHP: Use "very magic"
The pattern started to get unreadable
Also replaced non-greedy matching (`\{-}`) by greedy matching, because
we don't need to match non-greedily anymore and it reads a little nicer.
* PHP: Add tests for column matches
And with that, also a test for unexpected single quotes.
* Fix Credo's line-matching pattern
In d3e7d3d5, the line matching pattern was changed to handle filenames
other than `stdin`. Unfortunately, this broke the pattern's ability to
reliably extract both line and column numbers because the latter is an
optional match and the filename portion was very greedy. This resulted
in line numbers being discarded (treated as part of the filename) and
column numbers being interpreted as line numbers.
This change simplifies the pattern to only anchor on the line's suffix,
ignoring the filename portion entirely.
Alternatively, we could use vim's `\f` ("file name characters") class,
but that could still run into problems when `:`'s naturally appear in
the filename.
* Add a Vader test case for the Credo handler
This adds support for the hdevtools haskell linter
https://github.com/hdevtools/hdevtools
The output for hdevtools is near identical to the ghc output so this
also extracts the ghc handler into the handle file and adds tests
* Add testing for previous major release of ghc
This adds support for the hdevtools haskell linter
https://github.com/hdevtools/hdevtools
The output for hdevtools is near identical to the ghc output so this
also extracts the ghc handler into the handle file and adds tests
* A try at javac support for ALE
* Small cleanup: moved '/tmp/java_ale' string into script var
* Fixed Travis-CI build failing on autocmd not being in augroup and stupid omission
* One more fix for Travis-CI
* For some reason, expandtab was not set
* Indentation and removal of header guard.
Used examples from ale_linters/c/gcc.vim and
ale_linters/javascript/eslint.vim for the indentation of string concat blocks.
By default, Credo attributes input from STDIN as though it came from a
file named `stdin`. This change passes the buffer's filename, too, so
that Credo can use that information when applying its configuration.
This is a nice improvement because files like `mix.exs` are normally
excluded from Credo-based linting. Previously, ALE would show lint
warnings for those files as they were edited. Now, they are correctly
honor the Credo configuration and don't produce lint output.
* try fixing go build
* cache some system calls
* fix /dev/null
* use chained commands, use `go test -c` instead of `go tool compile`
* fix some unescaped shell commands
* fix a bug with explicitly setting GOPATH
* implement changes requested in code review. handle errors from multiple files. fix issue when starting a new package
* run `go env` as a job
* ensure all functions return the proper type
* fix loclist line numbers in some cases
* remove multibuffer support for now
